Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 11 of 181
Results 101 - 110 of 1810
Part number: NCB9103
Important compatibility info
| Title | CV Boot Fitting Tool - Manual |
| Function | Screw |
| Type | Screw |
Additional Information
- Designed to be used with the NAPA CV boot ranges
- Dismantling of the CV joint not required for fitment
- Fits CV joints up to 95mm in diameter
- Hardwearing for everyday garage use
- Designed from rigid plastic, it is the ideal method for fitting ‘stretchy’ CV boots
ONLY
£11.10
£11.10
Part number: NCB9101
Important compatibility info
| Title | CV Boot Fitting Tool - Pneumatic |
Additional Information
- Working pressure 4 to 8 bar
- One model that covers all vehicle models
- Reduces fitting time to approximately 20 minutes
- The boot remains fully expanded until the release is pressed
- The piston design allows the boot to be expanded and then disconnected from the airline – no need to drag it round the garage
- Suitable for use with the full range of NAPA CV boots as well as other branded ‘stretchy’ boots
- Manufactured using a high quality resin based plastic giving it a robust but lightweight design – ideal for everyday garage life
- Pneumatic tool that utilises existing airline systems in garages
- BS EN ISO 4414:2010 Pneumatic fluid power
- BS EN ISO 12100:2010 Safety of machinery
- The Machinery Directive 2006/42/EC
- Features a patented built in safety mechanism and is fully CE Certified
- Supplied ready assembled
ONLY
£114.59
£114.59
Part number: 372
Important compatibility info
| Title | Specialist Detailing Brush |
Additional Information
Cleaning your bike after a muddy ride can be very boring and time consuming. As can keeping your bike in tip-top condition. Therefore, having the right tools for the job can save time and effort, and even makes the most mundane tasks more enjoyable. Muc-Off have developed a large and extensive range of cleaning and maintenance products to make the job of cleaning your bike a far easier task. This detailing brush from Muc-Off is the ideal solution for all your cleaning needs. It is ideal for reaching hard-to-shift dirt on hubs and other tight areas such as suspension mounts or fork crowns. Its unique design features a tough, impact resistant handle that won’t slip in extreme conditions, durable nylon bristles and rubberised impact zones for maximum protection on delicate finishes. Muc-Off was established in 1991 with an obsession for making the most innovative care products around to keep you and your toys running at their maximum, and making them look like new when you’re done. Fast-forward to 2017 and Muc-Off is now the go-to brand for top riders and racers from the likes of Team Sky to Atherton Racing. Their state-of-the-art research and development centre is constantly working to develop the finest products in the world.
- Oversized brush head
- Rubberised impact zones
- Durable nylon bristles
- Ideal for detailed wheel cleaning
- High quality construction
- Tough impact resistant rubberised handle
ONLY
£10.13
£10.13
Part number: 4933480957
Important compatibility info
| Other Part Number | M18 FDGROVPDB-0X |
| Title | M18 FDGROVPDB-0X - M18 FUEL braking die grinder with ONE-KEY, variable speed and paddle switch -1pc |
Additional Information
M18 FDGROVPDB-0X - M18 FUEL™ braking die grinder with ONE-KEY™, variable speed and paddle switch -1pc
- Flexible battery system: works with all MILWAUKEE® M18™ batteries
- The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
- Rubber front provides most comfortable handling
- Removable dust screen to prevent debris entrance, prolonging motor life
- Slim handle design
- 2 LED's around the reception to illuminate the working area
- Spindle lock - increased productivity by reducing the need of 2 wrenches
- ONE-KEY™ tool tracking & security offers a free of charge cloud-based tracking network and inventory management platform for your tools. ONE-KEY™ also features a remote locking functionality
- RAPIDSTOP™– stops all accessories in under the 2 seconds
- Maximum control for every application - 5-step speed dial ideal for working with stainless steel, carbide burrs & accessories up to 75 mm
- Non-lockable safety paddle switch with line-lock-out function to prevent automatic start up
- Universal reception to fit both, 6 and 8 mm accessories
- Delivering corded performance similar to a 1200 W grinder
ONLY
£285.61
£285.61
Part number: 4933479680
Important compatibility info
| Other Part Number | M12 FDSS-0B |
| Title | M12 FDSS-0B - M12 FUEL sub compact spot sander -1pc |
Additional Information
M12 FDSS-0B - M12 FUEL™ sub compact spot sander -1pc
- Flexible battery system: works with all MILWAUKEE® M12™ batteries
- Sponge interface pad included optimises the tool for profiles and contours which increases the precision and removal of material
- Low vibration at only 4.3 m/s²
- Hook and loop pad allows the user to change quickly between different grit types
- Compact detail sander with a penta shaped pad allows uncompromised corner accessibility
- The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
- LED lights up your work area for better visibility
- Four speed modes allows the correct speed to be set for different types of material
ONLY
£165.48
£165.48
Part number: 4933479618
Important compatibility info
| Title | M12 Fuel 1.6 mm Nibbler |
Additional Information
M12 FNB16-0X M12 FUEL 1.6 mm nibbler
- The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE brushless motor REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power run time and durability
- Integrated belt hook and lanyard tie off point
- Maximum control for any material with a 5-step speed dial it is ideal for working with stainless steel and aluminium
- Tool-free die holder and punch change
- Tool-free change of cutting direction in 90dgsteps
- LED lights up your work area for better visibility
- Chip collection bag for a clean working environment
- Auto-control start feature it starts slow and ramps to full speed when the tool detect the user is making a cut
- First 12V Nibbler with max. cutting capacity in mild Steel: 1.6 mm in Stainless Steel: 1.2 mm in Aluminium: 2.1 mm
- Flexible battery system: works with all MILWAUKEE M12 batteries
- With only 1.6 kg (6.0 Ah battery included) it is the lightest cordless Nibbler on the market while still outperforming 18V brushed competitors
ONLY
£309.76
£309.76
Part number: 4933498056
Important compatibility info
| Title | M18 HIGH TORQUE IMPACT WRENCH BARE UNIT |
ONLY
£496.54
£496.54
Part number: 4933493136
Important compatibility info
| Title | M12 Automotive Tech. Borescope |
Additional Information
A MILWAUKEE® inspection camera allows you to discover the smallest problems inside pipes, drains and sewers before you start to roll up your sleeves.
- IP67 camera head and camera cable
- Included 32 GB micro SD card
- 5 modes of brightness
- 720p camera resolution with 3 level zoom
- 270° rotating screen
- Front and side view camera
- 5.0 mm camera head
- 4.3″ LCD screen delivers sharp and clear images
ONLY
£432.07
£432.07
Part number: 4933492647
Important compatibility info
| Title | M18 Brushless 115mm angle grinder with paddle switch |
Additional Information
M18 BLSAG115XPD-0 - M18 Brushless 115mm angle grinder with paddle switch
- Flexible battery system: works with all MILWAUKEE M18 batteries
- Brushless motor, REDLITHIUM battery pack and REDLINK electronic deliver power, run time and durability
- Slim handle design
- Integrated dust screen to prevent debris entrance, prolonging motor life
- 115mm keyless guard with cutting guard clip for fast guard adjustment without using a key
- Non-lockable safety paddle switch with line-lock-out function to prevent automatic start up
- Safety clutch protects user the from kickback injuries
- Most compact and lightest cordless angle grinder in the the range
- Powerful brushless motor delivering corded performance similar to a 800W grinder
- 11,000 RPM optimised for cutting applications
ONLY
£144.28
£144.28
Part number: 4933480958
Important compatibility info
| Title | M12 Fuel Band File 10 mm |
| Other Part Number | M12 FBFL10-0 |
Additional Information
M12 FBFL10-0 - M12 FUEL band file 10 mm
- Flexible battery system: works with all MILWAUKEE M12 batteries
- The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
- LED lights up your work area for better visibility
- Tool-free belt change
- Dual action safety trigger with lock-on function for less strenuous on longer working periods
- 360 degree tool-free head adjustment allows the best handling for each working environment and provides compact storage
- One-hand design allows working in tight areas and ideal for overhead work
- Reverse mode allows the user to choose the belt orientation to manage the direction of sparks/ chips
- 2 speed modes and variable speed trigger provide maximum control from taking down welds to precise work with inox, aluminium and wood
- Outperforms pneumatic competitor while providing better balance
- Lightest cordless band file on the market, only 1.0kg with a 2.0 Ah battery
ONLY
£189.01
£189.01
Page 11 of 181
Workshop Tools
