Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 7 of 267
Results 31 - 35 of 1331
Part number: CMCOMPTEST
Important compatibility info
Additional Information
3 Inch Piston Ring Compressor 53175mm
- This set also includes claw, clamp and spacers for dummy profiling which is suitable for Car, Van, Truck, Bus, Agricultural & Marine injector sizes (suitable for use where injector is held in place by clamp / claw / bridge. Collar system allows easy match
- This set could cover most modern car, van, truck, bus, agricultural and marine engines.
- Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors.
ONLY
£181.32
£181.32
Part number: PPECT3000
Important compatibility info
| Title | Circuit Tracer for Shorts and Open circuits ECT3000 |
Additional Information
The ECT3000 Circuit Tracker is a versatile diagnostic tool designed to help automotive professionals efficiently locate and diagnose open and short circuits in vehicle wiring systems. By transmitting a polarized 4kHz signal, it simplifies troubleshooting by enabling quick detection of problematic circuits without disassembling complex wiring harnesses. Key Features: Short Circuit Tracking: Pinpoints shorts and provides directional guidance with a polarized signal. Open Circuit Tracking: Detects breaks or interruptions in the wiring and follows the signal across obstacles like carpets or panels. Adjustable Sensitivity: Allows users to fine-tune the detection range for precise diagnostics. Clear Feedback: Offers both visual LED indicators and audible alerts for easy interpretation of circuit status. Extended Range: The 6m transmitter cable ensures accessibility across large vehicles. Safety and Protection: Operates within safe voltage and current limits, avoiding damage to sensitive electronics. Auto Shutoff: Conserves battery life by turning off the receiver after 10 minutes of inactivity. Specifications: Transmitter Voltage Range: 6V to 48V DC. Receiver Power: 2 AAA batteries. Signal Frequency: 4kHz. Temperature Limits: 50°C operating, 70°C storage. Humidity Limit: 80% non-condensing. Altitude: Functional below 2000m. Applications: Locating short circuits in automotive wiring systems. Tracking open circuits or wiring breaks. Identifying intermittent electrical issues. Diagnosing and testing vehicle ground circuits.
- Signal Locking will show the correct direction to a short to ground
- Signal distance bar indicates distance height from short to ground or open circuits
- LED light on receiver illuminates the work space area
- Longer 10-minute Auto shut off time
- Operating Voltage (Transmitter): 6V-48V DC
- Current Consumption (Transmitter): <200mA
- Operating Voltage (Receiver): 2 AAA batteries
- Signal Frequency: 4kHz polarized signal
- Circuit Testing Modes: Open circuit tracking
- short circuit tracking
- ground circuit tracking
- Operating Temperature: Up to 50°C
- Storage Temperature: Up to 70°C
- Maximum Humidity: 80% non-condensing
- Altitude Limit: <2000m
- Signal Detection: Indicates short and open circuits using visual and audio cues
- Sensitivity Adjustment: Adjustable for varying signal strengths
- Auto Shutoff: Receiver turns off after 10 minutes of inactivity
- Accessories Compatibility: Standard 4mm banana jack connectors for custom adapters
- Cable Length: 6m transmitter power cable for extended reach.
ONLY
£180.55
£180.55
Part number: C5265
Important compatibility info
| Title | Engine Timing Tool Ford EcoBoost 3 Cylinder -Petrol |
Additional Information
- M1CA, M1CB, M1DA, M1DC, M1DD, M1DH, M1FA, M1JA, M1JC, M1JE, M1JH, M1JJ, M1JL, M1JM, M1JP, M1JU, M2DA, M2DB, M2DC, M2GA, M2GB, P4JA, P4JB, P4JC, P4JD, SFCA, SFCB, SFCC, SFCD, SFCE, SFCF, SFDB, SFJA, SFJB, SFJC, SFJD, SFJE, SFJH, SFJJ, SFJK, SFJL, SFJP, XMJA, XMJB, XMJC, XMJD, YYJA, YYJB, YYJC, YYJD, YYJE, YYJF, YYJG, XPJA, XPJB, XPJC, XPJD, XYJA, XYJB, XYJC, XYJD, XYJE
- C5265 Engine Setting & Locking Kit is an alternative to the larger CBIOSTPET Kit and is used on Belt-in-Oil engines, commonly referred to as 'wet belt' engines, installed in 1.0 EcoBoost 3 Cylinder and 1.1 Ford models, and contains the essential tools required for Belt Removal/Installation and Valve Timing Check.
- Ford
- B-MAX, C-MAX ('11), C-MAX ('15), EcoSport, Fiesta ('13), Fiesta Active ('18), Focus ('11), Focus ('15), Focus ('19), Grand C-MAX ('11), Grand C-MAX ('15), Grand Tourneo Connect ('14), Mondeo ('15), Tourneo Connect ('14), Tourneo Courier (14), Transit Connect ('14), Transit Courier ('14)
- Equivalent to OE reference: 303-1605, 303-1604, 303-732, 303-1602
ONLY
£179.81
£179.81
Part number: C5225
Important compatibility info
| Type | Tool Set, timing chain |
| Function | Tool Set, timing chain |
| Extra Description | Carlyle |
| Number of Parts | 8 -part |
ONLY
£178.50
£178.50
Part number: CDTW38FL
Important compatibility info
| Title | 3/8in Drive Digital Flex Head Torque Wrench with Angle Indicator |
Additional Information
- Ability to measure in multiple units creates more versatile tool
- High torque accuracy allows for high degree of precision in working conditions
- High angle accuracy allows for high degree of precision in working conditions
- Enhances Torque & Angle Accuracy in Low Lit Areas
- Allows for quick and easy changes between different commonly used angles
- Measures Ft-lbs, in-lbs, Degrees, N-m, kg-cm
- Torque Accuracy CW: +/- 2% - CCW +/-3%
- Angle Accuracy +/- 2° For 90° Rotation
- 12 LED Indicator
- Torque Accuracy CW: +/- 2% - CCW +/-3%
- 5.0 to 99.5LBF.FT
- 6.77 to 134Nm
ONLY
£177.86
£177.86
Page 7 of 267
Workshop Tools
