Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 13 of 420
Results 61 - 65 of 2096
Part number: QJB100T
Important compatibility info
| Length | 465 mm |
| Width | 148 mm |
| Function | Mounting Tool, bellow |
| Weight | 2 kg |
| Extra Description | Duraboot |
| Type | Mounting Tool, bellow |
Additional Information
Safety information
Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.
Installation Information
Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.
ONLY
£99.23
£99.23
Part number: QFD199
Important compatibility info
| Function | Pipe Cutter |
| Type | Pipe Cutter |
ONLY
£20.35
£20.35
Part number: PPVT750
Important compatibility info
| Title | 12 To 750V Two Pole DC/AC Automotive Car Voltage Meter Electric and Hybrid Vehicles |
Additional Information
The PPVT750LCD Voltage and Continuity Tester is a reliable tool designed for electricians and technicians to perform quick, accurate voltage and continuity checks. Its LCD display provides clear readings for both AC and DC voltages, while its battery-free design ensures readiness at all times. Key Features: Wide Voltage Range: Tests voltages from 12V to 750V AC/DC, catering to residential, commercial, and industrial applications. Continuity Testing: Emits an audible beep for clear identification of electrical continuity. Polarity Detection: Automatically identifies the positive and negative poles in DC circuits. Battery-Free Operation: Powered by the voltage under test, ensuring consistent performance without the need for battery replacements. Safety Certified: CAT III 750V rating ensures safe operation in high-voltage environments. Ergonomic Design: Lightweight and compact, with an ergonomic grip for extended use. Durable Build: Protective housing enhances longevity, even in demanding conditions. Specifications: Voltage Range: 12V to 750V AC/DC. Display: Digital LCD with backlit screen for clear visibility. Response Time: Quick detection of voltage and continuity. Polarity Detection: Yes (for DC systems). Continuity Detection: Yes, with an audible beep. Overvoltage Protection: Built-in safeguards. Safety Rating: CAT III 750V. Operating Conditions: 0°C to 40°C, 80% relative humidity. Applications: Testing outlets, switches, and wiring in residential and commercial systems. Verifying circuit continuity in industrial settings. Identifying voltage and polarity in automotive and HVAC systems.
- Service Your Vehicles Safely: Electric and hybrid vehicles feature battery systems that need to be disconnected to prevent error or shock prior to service; Use the Power Probe VT750 LCD Car Voltage Meter Tester to ensure your battery voltage reads zero be
- Reliable Detection for Optimal Safety: Auto electric tester tool has a voltage rating from 12 to 750 volts and overvoltage protection up to 1000 volts AC/DC
- Compact Two-Prong Design: 9.4-inch (23.9cm) fixed probe housing and secondary electrical tester pole work together to prevent false readings and measure accurate, exact voltage (AC/DC) current
- Quality You Can Trust: Thick material ensures durability for the volt meter, while the retracting insulators help prevent any accidental shorts between the probes or surrounding objects
- Easy To Use: 10 minutes after disconnecting the 12-volt and high-volt batteries, complete a Live-Dead-Live test; Check 12v battery for a baseline, check high-volt battery for a dead or zero reading, then re-verify the electrical meter is still functioning
- Voltage Testing Range: 12V to 750V AC/DC
- Continuity Testing: Audible beep for continuity detection
- Display: LCD with clear digital readings
- Voltage Indication: Provides AC and DC voltage differentiation
- Polarity Detection: Identifies positive and negative poles
- Safety Compliance: CAT III 750V certification
- Response Time: Quick response for voltage and continuity checks
- Overvoltage Protection: Protects the device during high voltage surges
- Power Source: No batteries required, powered by the voltage under test
- Operating Environment: Designed for 0°C to 40°C, with 80% relative humidity tolerance
- Build Quality: Durable, ergonomic design with protective housing
- Probes: Integrated test probes with secure connectors.
ONLY
£105.07
£105.07
Part number: PPT5VA
Important compatibility info
| Title | 5 Volt Reference Adapter Connect Power Probe Circuit-Tester & Limit Voltage to 5-Volts |
Additional Information
The PPT5VA 5 Volt Adapter is an essential accessory for automotive professionals using Power Probe Circuit Testers. It provides a stable, regulated 5V output, enabling precise testing of low-voltage circuits and components. This adapter ensures compatibility with most Power Probe models and includes a robust LED indicator for active status monitoring. Key Features: Stable 5V Output: Provides a reliable, regulated 5V power supply for circuit and component testing. Broad Compatibility: Compatible with all Power Probe models featuring a banana jack tip, including PPBasic, PP3 Series, PP4 Series, and Pro Series. Older models (PP1 and PP2) require a conversion kit. LED Indicator: Illuminates red when the adapter is active, providing clear feedback. Auxiliary Ground Connection: Ensures secure grounding with the included ground lead clip. Easy Installation: Quickly attaches to the Power Probe tip with standard 4mm connectors. Durable Design: Made with high-quality materials for reliable performance in demanding environments. Applications: Testing low-voltage automotive circuits and components. Supplying a stable 5V to sensitive electronic systems during diagnostics. Enabling compatibility with older Power Probe models using the banana jack conversion kit.
- Reduces the Power Probe tip battery voltage to 5V and limits the current output works with PP3EZREDAS
- Simple add-on accessory that works with all Power Probes with 4mm banana tip
- Safely simulate sensor reference voltages and outputs without damaging components
- Voltage Output: 5V regulated output
- Connector Type: Standard 4mm banana connector
- Compatibility: Works with Power Probe Circuit Testers (PPBasic, PP3 Series, PP4 Series, Pro Series)
- Adapter Requirement for Older Models: Requires banana jack conversion kit (#PNLS020A) for PP1 and PP2 models
- LED Indicator: Red LED illuminates to show active 5V output
- Ground Connection: Includes auxiliary ground lead clip for secure grounding
- Durability: Built with rugged materials for long-term use
- Use Case: Supplies a stable 5V to test circuits and components in vehicles
- Dimensions and Weight: Compact and lightweight for easy portability.
ONLY
£33.05
£33.05
Part number: PPPWM
Important compatibility info
| Title | PWM Adapter Tip for Pulse Modulation Width Measurement |
Additional Information
The PPPWM Pulse Width Modulation Controller is an advanced tool designed for professionals and hobbyists in automotive and industrial settings. It provides precise control over DC-powered devices through an adjustable PWM signal, making it ideal for tasks requiring variable power outputs. Key Features: Adjustable Frequency and Duty Cycle: Offers complete control over PWM signals, with frequency adjustable from 10Hz to 200Hz and duty cycle adjustable between 0% and 100%. High Current Capacity: Supports up to 40A, enabling control of high-power devices. User-Friendly Operation: Features a rotary dial for seamless power adjustments and LED indicators for operational status. Enhanced Protection: Built-in overvoltage and reverse polarity protection to safeguard connected devices. Compact and Durable Design: Lightweight yet robust housing ensures portability and longevity in demanding environments. Versatile Applications: Suitable for controlling motor speeds, lighting, and other DC-powered equipment. Specifications: Voltage Input: 9V to 24V DC. Maximum Output Current: 40A. Frequency Range: 10Hz to 200Hz. Duty Cycle Adjustment: 0% to 100%. Operating Temperature: -20°C to 60°C. Protection Features: Overvoltage and reverse polarity protection. Dimensions: Compact and portable. Applications: Controlling motor speeds in automotive systems. Regulating power to DC lighting setups. Adjusting power levels in various DC-powered devices in workshops or industrial settings.
- ADJUSTABLE DUTY CYCLE from 5% to 100% with side buttons
- COMPATABLE WITH all Power Probe models with a 4mm banana jack in/out
- EASY INSTALL by removing power probe tip and inserting adapter into banana jack
- GREAT FOR diagnosing circuit fan issues
- Voltage Range: Operates between 9V and 24V DC
- Current Capacity: Maximum 40A output
- Frequency Range: Adjustable pulse width modulation (PWM) frequency from 10Hz to 200Hz
- Duty Cycle Range: Adjustable from 0% to 100%
- Input Protection: Overvoltage and reverse polarity protection
- Output Control: Variable output power via rotary dial
- Dimensions: Compact enclosure design for portability
- Connection Interface: Equipped with standard terminals for easy wiring
- Operating Temperature: -20°C to 60°C
- Housing: Durable and lightweight for automotive or workshop use
- Indicators: LED indicators for power status and output activity.
ONLY
£47.86
£47.86
Page 13 of 420
Workshop Tools
