Workshop Tools

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

General Information

Rear Swinging Arm Bush Tool - for Ford

• Designed and manufactured in Sheffield
• Force Screw replacement Part No: Laser 1319, Nut Assembly replacement - Laser 1803
• Supplied with Molybdenum Disulphide grease for extended force screw life
• Designed to be used on car with the minimal strip down reducing the time taken to replace worn bushes (Bush Nos: 1 535 296/1 805 815)
• Application Ford Fiesta MK VI 2008 onwards

• Bush Nos: 1 535 296/1 805 815

• Manufactured from Chrome Vanadium
• 6pt (Single Hex)
• 1/2in. Drive
• For use with Air Impact Tools

General Information

For VAG 1.4/1.6/2.0 TDI CR engines from approx. 2012 onwards Includes tooling for timing the camshaft gears. Supplied in a metal case with foam inner. Made in UK

• Crankshaft Timing Tool and Locking Pin (C695) EU Registered Design
• Supplied in a metal case
• Includes tooling for timing the camshaft gears
• Offers 1.4/1.6/2.0 TDi CRD coverage from 2012 onwards
• Tools equivalent to OEM: T10265, T10264, T10492, T10409, T10064A, T10051
• Applications: Audi A3 III, A4, Seat Leon III, Volkswagen Golf VII and Skoda Octavia 2012-2016 with engine codes: 1.4 CUSA, CUSB, CUTA and 2.0 CKFC, CKFB, CRBC, CRBD, CRFA, CRFC, CRLB, CRLC, CRMB, CRVA, CRVC, CSUA, CSUB, CUNA, CUPA

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Gloves and goggles should be used in high powered situations
• Manufactured from Chrome Vanadium with high Chromed finish
• Universal use
• Length 385mm
• Extends the length of spanners when you need more leverage

General Information

Glow Plug Socket Set 1/4"D 3pc Glow Plug Socket Set 1/4"D 3pc.

• Sizes: 8mm, 9mm, 10mm
• Features 1/4in. Drive and universal joint
• Manufactured from Chrome Vanadium
• Super slim for improved access in tight areas

General Information

Plastic 6mm Chain 25mtrs. Plastic 6mm Chain 25mtrs

• Chain size 6mm x 25mtrs
• Red and White for high visibility
• Use with Laser Posts and Bases - Part 6643/6644

General Information

Protective Faceshield Bag. Protective Faceshield Bag

General Information

Cable End Shroud with Grip Collar - 35mm. Cable End Shroud with Grip Collar - 35mm

• 35mm diameter x 130mm length
• Also available: 15mm x 100mm length and 25mm x 110mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Cable End Shroud with Grip Collar - 15mm. Cable End Shroud with Grip Collar - 15mm

• 15mm diameter opening x 100mm length
• Also available: 25mm x 110mm length and 35mm x 130mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Glove Storage Bag. Glove Storage Bag

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Insulated Safety Clamp 1000v

• Dimensions: Length 140mm
• For use with insulated shrouding to hold the shroud in situ
• Jaw opening 45mm
• Rubber contacts in the jaw protect the insulating shroud
• Weight 52 grams

General Information

Engine Cylinder Hone 51-250mm. Engine Cylinder Hone 51-250mm

• Use with cordless drill for efficient results
• Replacement stone set Laser Part No. 2071 (consumable)
• Flexible self-aligning shaft allows use without removing cylinder
• Cleans and de glazes cylinders of carbon deposits quickly and effectively
• Adjusts from 51mm to 260mm

General Information

Fuel Filter Wrench 88mm x 15 Flats

• Pressed steel construction
• Equivalent to Honda OEM 070AA-RL00200
• 88mm (point to flat) x 15 flutes 3/8”D
• Applications include: Honda I-dtec diesel fuel filter
• Also suitable for oil filter removal where dimensions match (Hyundai/Kia 3.3 and 3.8 V6 petrol)

General Information

Engine Timing Tool Kit - for VAG 1.0, 1.2, 1.4L

General Information

EU Registered Design

General Information

Ribe Socket Set 1/2"D 3pc

• Sizes: 6S, 8S, 12S
• Manufactured from Chrome Vanadium with Phosphate finish
• For clutches, cylinder heads and balance shaft fixings etc
• Applications: Nissan, Renault
• 1/2in. Drive

General Information

Timing Tool Kit - Ford 1.25, 1.4, 1.6 16V, 1.5, 1.6 TI-VCT

• Made in Sheffield
• Also relevant to the Mazda and Volvo ranges
• Suitable for use with the following replacement belt kits INA530014010, Contitech CT881K2, Gates K025433XS
• This kit includes the alignment tool for VVT system found on many of these engines which extends the kits coverage from 1996 to 2010
• The essential camshaft and crankshaft alignment tools for the popular 1.25, 1.4, 1.6 Ford, petrol, engines

General Information

Cambelt Tool Kit - for VAG Petrol FSI 1.4, 1.6

• Made in Sheffield
• This kit is suitable for use with the following replacement Cam-belt kits INA 530008910, Contitech CT957K1, Gates K025565XS
• Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be used with or without the crossbar provided
• A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines

General Information

Timing Tool Kit - 1.3 JTD/HDi Fiat, GM, Suzuki, Ford, PSA

• Application: 1.3 JTD/HDi Diesel engines found in Fiat, GM, Suzuki, Ford, Citroen Nemo and Peugeot Bipper
• Timing tool kit with Camshaft/Crankshaft alignment tools only
• Made in Sheffield
• Full Engine rebuild kit available part number 4773
• Use 6408 (Camshaft Holding Tool) if removing camshaft drive gears

General Information

Flexible Air Hose - Blue Flexible Air Hose - Blue.

• Silicone free and resistant to oil, UV, abrasion and weather
• Manufactured from matt finished, super flexible rubber/vinyl hybrid polymer material which lies flat when uncoiled
• 9.5mm x 15m
• Maximum working pressure 300PSI , minimum bursting pressure 900PSI and the hose can stand -40° to +60° C
• Fitted with 1/4in. BSPP fittings

General Information

Drip Tray. Drip Tray

• Also useful when transfering fluids to avoid workshop floor contamination
• Protect your drive and garage floors from oil drips
• Pouring spout in corner
• Manufactured from plastic
• Size: 24in. x 18in. x 3/4in. (609mm x 457mm x 19mm)

General Information

Spark Plug Socket 3/8"D 16mm

• Manufactured from Chrome Vanadium
• Suitable for use on BMW motorcycle spark plugs
• Thin wall (maximum diameter 20.8mm)
• Matt finish
• 6 point face drive (Single Hex)

General Information

Camshaft Locking Pins - for Ducati 3V

General Information

Engine Timing Tool Kit - VAG 1.2-1.4 TSI. Engine Timing Tool Kit - VAG 1.2-1.4 TSI

• Use with tensioner wrench Part No 6199
• Fitted to Audi A1, A3, Q3, Volkswagen Golf VII, Passat, SV, Sportsvan, Polo, Jetta, Seat, Leon, Leon ST, and Skoda Octavia III, Fabia III from 2012 onwards
• Application for late 1.2/1.4TSI four cylinder, petrol engines (for three cylinder engines please use Laser 6230)
• Parts of this kit are design registered
• Made in Sheffield
• Unique camshaft locking tool design, equivalent to OEM T10494

General Information

Air Bag Test Resistor Set. Air Bag Test Resistor Set

• Follow all health and safety guidance for air bags
• The tool is a 2.5 ohms resistor with two pin probes and when connected to the associated wiring effectively becomes a “dummy” airbag
• Connect in place of the air bag unit to allow the system to test for easy confirmation of component failure
• Assists in the diagnosis of a failed air bag unit, failed airbag clock spring, seat-belt pre-tensioners, etc.

General Information

Clamp for Strut Insert Pistons - 60mm Bolts Clamp for Strut Insert Pistons - 60mm Bolts.

• Very useful when working with struts that are equipped with strong internal springs (tension stop springs) that pull the strut shaft partly into the strut
• Clamp for Strut insert pistons with 60mm bolts
• Kit includes 60mm long bolts (68mm including head)
• Locks the Mcpherson strut in its fully extended position

General Information

Camshaft Setting Bar - for Ford 1.5 & 1.6 EcoBoost

• Made in Sheffield
• For use with Laser Part No. 5903
• Equivalent to OEM 303-1552 for locking the camshafts in position to allow the variable valve timing pulleys to be removed
• Applications: 1.6L EcoBoost Sigma petrol engine in B-Max, C-Max, Fiesta, Focus, Galaxy, Grand C-Max, Kuga, Mondeo, S-Max, Tourneo Connect and Transit Connect
• Used to lock the camshafts in their timed position when engine repair or rebuild requires the cam pulleys to be removed and timed

• OEM 303-1552

General Information

Brake Caliper Socket 3/8"D 8mm

• It is designed to shear/break-away when used, hence the desire for a socket which covers the same application
• This adaptor is fitted on all new Knorr-Bremse calipers as an OEM part of the caliper, and is also supplied as part of the OEM service kit, along with the dust cover which fits over the caliper adjuster
• Manufactured from Chrome Vanadium, Manganese Phosphate finish
• Brake Caliper Socket (replaces Brake Caliper Shear/Break-Away Adaptor on the original caliper)
• 11point x 3/8in.D x 26mm long
• Used on Knorr-Bremse Calipers – type SB, SK, SN – typically found on DAF / Foden / MAN / Mercedes / Scania / BOVA , plus BPW & SAF Trailers

General Information

Engine Timing Tool Kit - for VAG 3cyl 4v

• Made in Sheffield. Camshaft Locking Bar (C667) is EU Registered Design
• Camshaft belt tensioner wrench available - Part No. 6199 (OEM T10499)
• Also for Blue Motion and Ecomotive plus Green Tech engines
• Plus Seat Mii and Skoda Citigo
• Application: 3 cylinder VAG engine currently found in the Volkswagen UP! engine code CHYA,CHYB