Workshop Tools

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Solid and robust construction
• Hand trigger inflate and thumb controlled deflate
• Auto power off
• Backlight
• Long battery life with battery level indicator
• psi, bar kpa units of pressure selectable by button; last selection saved
• Powered by PCL inflation technology and experience
• Suitable for all applications including tyreshop environments
• Low and simple maintenance
• Easy and cost effective to use
• Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
• Large, clear, easy to read LCD display with backlight

• Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa

• Equivalent to OE reference: EN-51367, EN-51632, EN-51298
• B10XE/L5Q, B10XFL/LE1, B10XFT/LE1, B10XHL/LE1, B10XL/LWT, D10XE/L5Q, D10XFL/LE1, D10XFT/LE1, B14XE/LV7, B14XFL/LE2, B14XFT/LE2 B14XHL/LE2, B14XHT/LE2, B14XNT/LFE, D14XFL/LE2, D14XFT/LE2, D14XNT/LFE, B15XHT/LFV, D15XHL/LFV, D15XHT/LFV
• C5287 contains the tools required to undertake the Valve Timing Check/ Engine Setting and Locking procedures on 1.0/1.4/1.5 Turbo and Naturally Aspirated Petrol Chain Engines fitted within Vauxhall/Opel applications.
• Vauxhall/Opel
• Adam (M13), Adam Rocks (M13), Astra-K (B16), Corsa-E (X15), Insignia-B (Z18), Insignia-B Country Tourer (Z18), Karl (C16), Karl Rocks (C16), Mokka X (J13) Viva (C16), Viva Rocks (C16)

• Switch latch for constant power
• Automatic circuit breaker reset
• Auxiliary ground lead holder

• Voltage Detection Range: Detects low to high AC voltages
• Non-Contact Operation: Ensures safety during electrical testing
• LED Indicators: Provides visual feedback for voltage detection
• Compact Design: Small and lightweight for convenient use
• Frequency Compatibility: Operates at standard electrical frequencies
• Durability: Engineered for regular use with robust construction
• Battery Operated: Powered by alkaline batteries
• Compliance: Meets international electrical safety standards.

• Internal blade storage for extra blades.
• Supplied with 12″ / 24 Tpi blade.
• Tough metal frame, supports higher tension (25,000 PSi / 250 lbs).
• Will accept up to 12″ blades.
• Overmould handle ensures secure grip and user comfort.

• Length: 14 11/16in. overall
• 32 teeth fixed head w/o quick release
• Torque accuracy CW: +/- 3%, comfort grip handle

• Finger squeeze protection at every position.
• Push button for quick and precise adjustments on the workpiece.
• Box-joint design provides highest durability and larger gripping capacity.
• Nail and wire holder.
• Induction hardened teeth with self-locking serration to not slipp on the workpiece.
• Double toothed jaw for maximum grip.

• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

• .Supplied in carrycase.
• Includes straight and right angled quick connect couplings, nine adaptors, Orings and 890mm long hose.
• Accurately tests oil pump pressure and also low oil warning devices.

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Ribbed on the underside fabric impression on upper side
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Flame retardant oil and acid resistant insulated floor matting

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

• Personalized Blowcase
• Gauge with 0.01mm Increments
• Shock-Proof Gauge
• Transverse Arm for Fine Adjustment
• Identifies Vertical and Lateral Wobble
• 3-Point Clamp Stand for Safe Mounting onto Shock Absorber
• Measures Radial and Axial Offsets on Brake Discs

• Plastic Carry Case With Foam Inlay
• Includes Product Identification & Help Guide
• Fit & Remove TPMS Components With Ease
• Specialist TPMS Hand Tools Kit To Cover All Bases When Fitting & Removing Sensors
• Includes Low Limit Torque Wrench, TPMS Sealing Grommet Removal & Fitting Tool, Pre-Torqued Valve Core Tool, 11mm & 12mm Deep Sockets, Selection Of Torx Bits Presented In Plastic Case With Foam Inlay

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• Protected against splashing water at all angles (IP24)
• 2 adjustable metal hooks for hanging in vertical and horizontal position
• Pivoting 45° forward & backward head allows for 180° coverage
• TRUEVIEW™ high definition lighting
• Thanks to its compact design it operates in locations other lights cannot
• Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting

• Designed for use with the part numbers 77099 and 77066 with the wheels on and the vehicle sitting on the ground
• Fully adjustable for wheels up to 18 inch diameter and designed to hang on the tyre giving hands free operation
• Can be used without the top bracket (held in place by hand) for vehicles with a low wheel arch
• Ideal for quick checking of camber, caster and KPI when used with Gunson 77099/77066