Workshop Tools

• FOUR FLAT sides on socket deter rolling.
• Wrench ready FOUR FLAT sides.
• Stamped sizes for easy visibility.
• Chrome finish for easy cleaning and corrosion protection.
• Available sizes: 12-24mm.
• Available sets: 13pc.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

• Citroën: Relay/Jumper III (06-14), Relay/Jumper III (14-): Fiat: Ducato (06-12), Ford: Focus ('98), Mondeo (00), Ranger ('12), Tourneo Custom, Transit ('06), Transit ('14), Transit (00), Transit Custom Jaguar: X-Type (X400)(01-10), Land Rover: Defender, LDV: Convoy, LTI: TXII (02-06), Mazda: BT-50 (UP)(12-), Peugeot: Boxer III (06-14), Boxer III (14-)
• Equivalent to OE reference: 303-682, LDV177, 303-679A, LDV170, 3003-1587, 0198.N, 2.000.018.700, 0198.B2, 2.000.016.500, LDV167, 0198.J, 303-698, 303-675, 303-1562
• ABFA, D3FA, D5BA, D6BA, F3FA, FIFA, FMBA, FMBB, HJBA, HJBB, HJBC, HJBE, N7BA, N7BB, SDBA, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, DRF5, DRFA, DRFB, DRFC, DRFF, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQW, MZ-CD, P8FA, P8FB, PGFA PGFB, QJBA, QJBB, QJBC, QJBD, QVFA, QWFA, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 4HG, 4HG (P22DTE), 4HH 4HH (P22DTE), 4HJ, 4HJ (P22DTE), 4HM, 4HM (P22DTE), 4HU, 4HU (P22DTE), 4HV, 4HV (P22DTE), BG, CRFF, CVF5, CVFF, CVR5, CVRA, CVRB, CYF5, CYFA, CYFB CYFC, CYFF, CYFG, CYR5, CYRA, CYRB, DRF5, DRFA, DRFB, DRFC, DRFG, DRR5, DRRA, DRRB, GBVAJ(QW2R), GBVAJPF, GBVAJQJ, GBVAJQJ (QJ2R), GBVAJQJ (QJ2S) GBVAJQJ (QJ2W), GBVAJQW, GBVAJQW (QW2S), GBVAJQW (QW2W), ID4/DT224, MZ-CD, P22DTE, P22DTE (4HG), P22DTE (4HH), P22DTE (4HJ), P22DTE (4HM) P22DTE (4HU), P22DTE (4HV), P8FA, P8FB, PGFA, PGFB, QJ2R, QJ2S, QJ2W, QJBA, QJBA (BG), QJBB, QJBC, QJBD, QVFA, QW2S, QW2W, QWFA, SRFA, SRFB, SRFC SRFD, SRFE, UHFA, UHFB, UHR5, USR6, USRA, USRB, UYR6, 244DT, D2FA, D2FB, D4FA, DOFA, F4FA, FXFA, H9FA, H9FB, H9FD, JXFA, JXFC, PD24P, PHFA, PHFC, ZSD 424 MZ-CD, SA2R, SA2S, SA2W, SAFA, SAFB
• C5279 contains the tools to enable the setting and locking of the engine to be undertaken during Timing Chain replacement and also the resetting of the position of the Crankshaft Sensor Carrier during Engine reassembly procedures.
• Citroën, Fiat, Ford, Jaguar, Land Rover, LDV, LTI, Mazda, Peugeot

• Can also be used on cooling systems hoses.
• Features a pressure gauge with shut off valve and pressure release valve.
• Kit supplied with 8 stepped adaptors to fit most hose sizes.
• Used in conjunction with an air line to show the presence of leaks
• sizes; 35 to 95mm

• Special tool steel
• Applicable to NCCJ500 and CTRNSJ500K
• Suitable for transmission jacks with mounting diameter of 30 mm
• Locking bracket for holding the strut securely
• Prevents the suspension strut from lowering when working on the axle
• Ideal for supporting the suspension strut
• Universal

• Over molded handle for more control and better grip.
• Steel reinforced handle for higher durability.
• Durable metal faces preventing chipping on contact.
• Precision balanced design and steel shot-filled head for optimised control.

• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• All-chrome shafts for increased durability.
• Comfortable Tri-Lobe handles for better grip.
• Hammer-ready strike cap improves leverage when working in tight and tricky spaces.
• All-metal core for improved durability.
• I-Beam design for added durability.
• Curved claw design reduces damage when pulling nails.

• 72-tooth ratchet allows the user to rotate with a smaller movement of the handle
• High torque accuracy allows for high degree of precision in working conditions
• Handle provides strong, durable and comfortable hand hold
• Two Way Click Design creates a a more versitle tool that can perform multiple functions
• 45 Teeth Round Head
• Durable Anodized Aluminum Handle
• Two Way Click Design (Clockwise / Counter Clockwise)

• 45 Teeth Round HeadTorque Accuracy CW: +/- 4% - CCW: +/- 6%
• 50 to 250Lbf.ft
• 67 to 338Nm

• 36 teeth ratcheting mechanism allows for finer adjustments and greater precision when tightening or loosening fasteners compared to wrenches with fewer teeth
• Torque range allows for a high degree accuracy and percision over full range
• Handle provides strong, durable and comfortable hand hold
• Allows for smooth actuation
• New Thrust Bearing System for smooth handle torque adjustments
• 45 teeth gear system
• Aggressive grip
• Recessed switch plate

• 45 teeth gear systemTorque range: 25 - 250 ft lbs
• 50 TO 250LBF.FT
• 67 TO 338Nm

• High quality hot-forging process provides a performance exceeding ASME standard
• Full popular range of metric sizes fits most circumstances
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Can be used in situ no need to remove trailing link assembly from vehicle.
• Remove/install Fiesta IV rear axle mounting bushes.

• Textured nose maintains control when grabbing and twisting with serrated nose.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Includes AFG4 0-140 psi & 0-9.6 bar 0.53m Hose SCO Connector
• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2015
• Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 0.53 m / 21 in Tyre Valve Connection: Single clip-on Calibration: 0-138 psi / 0-9.6 bar

• Protected against splashing water at all angles (IP24)
• 2 hooks for hanging
• High powered 2.1A USB charger charges tablets, smart phones, MP3 players and other electronic devices
• Best-in-class performance - outstanding light output 400+ lumens, designed to illuminate large areas
• TRUEVIEW™ high definition lighting
• Job site durability - rugged designed with impact resistant lens to withstand abusive job site conditions
• 180° - 360° adjustable beam - versatile design, allows the user to select between area lighting and task lighting
• Flexible battery system: works with all MILWAUKEE® M12™ batteries

• Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
• Gripping zone with integrated wire bender for flat and round material.
• Two component handle design for comfortable handling and ergonomic grip.
• Grey titanium surface finish is non reflective and ensures maximum corrosion resistance.
• Induction hardened cutting edges to cut even the hardest of materials.
• Integrated ring spanner to tighten or untighten metric bolts (M8 to M10).
• Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work.