Workshop Tools

• Lowest vibration in its class 4.56 m/s² driving productivity through performance and safety
• Adjustable 10,000 to 20,000 opm allow the user to get the perfect cut whatever the material
• Brushless POWERSTATE motor delivers fast cutting speed through common materials without slowing or bogging down in hardwoods
• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
• Supplied with an adapter plunge cut blade OSC 112 sanding backing pad 5 x sanding sheets and a DEK26 dust guard to use when sanding
• LED work light illuminates the cut line in low light conditions
• FIXTEC tool free blade change with universal blade change adaptor included to accept all major competitor blades
• REDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• Ability to make up to 59 cuts in oak on one 2.0 Ah battery charge
• 1.8dgleft/right oscillation angle allowing faster cuts

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Maximum jaw opening: 265mm
• Yoke specification/size/suitability: .Golden cour: 65-125mm
• Capacity: 1000kg
• Compatible with a wide range of vehicles
• Suitable for Macpherson strut coil springs

• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
• Rivets in one stroke with a 20.32 mm stroke length
• On board fuel gauge and LED light for added user convenience and illumination in low lit working conditions
• Tool-free access to easily clean jaws. On-board nose piece storage and removal tool for user convenience
• Integrated belt hook and lanyard tie off point
• Ergonomic design with 273 mm H x 66.8 mm W x 165 mm in length without mandrel collector
• Retention nose pieces hold rivets in any orientation
• Up to 325 x 4.8 mm stainless steel rivets on a single charge with a 2.0 Ah battery pack
• Supplied with 4 x retaining tips
• Suitable for all aluminium steel stainless steel and copper rivets up to 4.8 mm

• Integrated hose storage, shoulder strap loop & LED fuel gauge - added user convenience and reducing down time
• Air bleeder valve - priming mechanism for quick flow
• REDLITHIUM™ battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• Grease capacity 400 ml cartridge, 473 ml bulk
• Strong handle balance and ergonomics - only 355 mm long and 3.9 kg
• Extreme long run time - dispenses up to 7 cartridges per charge
• Supplied with 1219 mm high pressure flex hose with spring guard
• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
• Powerful 18V motor delivers over 690 bar max. operating pressure
• Three way loading - bulk, cartridge and suction capable

• Flexible battery system: works with all MILWAUKEE® M18 batteries
• *on moderate to good paint, light scratches
• Line-lock-out function to prevent automatic start up after battery change
• 3 position bale handle for improved tool control
• Lock-on function provides more comfortable use when polishing for longer periods
• Rubber overmold gear case for increased comfort, especially when working with the tool vertically
• Removable dust screen to prevent debris ingress, prolonging motor life
• Maximum polishing accessory diameter of 180 mm
• Constant speed electronics with soft start for smooth start up
• Outstanding run time to polish one full size car per battery charge
• World´s first cordless polisher with 8 position variable speed selection ranging from 360 - 2200 rpm
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• REDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• Brushless POWERSTATE motor to deliver the ultimate mobility in car polishing

• 1500Kg Hydraulic Unit Foot Operated Pedal
• Safer and easier than using a ratchet driven spring compressor
• Suitable for springs from 80mm to 175mm

• Spring Diameter 180 to 175mm
• Net Weight 33.5Kg
• Operation Foot Pedal

• POWERSTATE brushless motor pairs with an aggressive oscillation angle of 2.1° (left/ right) and 10,000 – 20,000 OPM to deliver one of the fastest cut speeds in the industry
• Suitable for many demanding applications with ease, such as rip cuts through hardwoods and nail embedded wood
• 10-setting dial with an auto-load feature allows users to adjust the speed to the application
• FIXTEC tool free blade change with universal blade change adaptor included to accept all major competitor blades
• Integrated 180 degree LED light for maximum visibility in low-light situations
• Supplied with 1x universal fit OPEN-LOK oscillating multi-tool wood blade, 1x multi-tool sanding pad, 1x 60 grit sand paper, 1x 80 grit sand paper, 2x 120 grit sand paper, and 1x 240 grit sand paper
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Flexible battery system: works with all MILWAUKEE M18 batteries

• Flexible battery system: works with all MILWAUKEE M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Tri-LEDs for shadowless work area illumination
• Trigger mode selection for easy one hand selection of speed settings
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• 3,000 RPMs for exceptional application speed
• A weight of 1 kg without battery and a length of 122 mm means better access to tight spaces and less user fatigue
• Best in class power: 542 Nm of fastening and 745 Nm of nut-busting torque to tackle most common applications

• 1/2in. Insulated T-handle Wrench 200 mm
• 1/2in. Ratchet Wrench 250 mm
• 1/2in. Extension Bar – 125 mm & 250 mm
• 1/2in. Bits Socket (120mm) – 4, 5, 6, 8 & 10 mm
• 1/2“ Hex Socket (55mm) – 10, 11, 12, 13, 14, 17, 19, 22, 24, 27 & 32 mm
• Packed in blow case and EVA foam
• Each tool is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Suitable for electricians(1000V AC safe live working).
• Manufactured from hardened and tempered Chrome vanadium steel.

• High performance motor delivers 6,400 to 24,000 sanding strokes per minute for faster material removal
• 5.0 mm orbit function to deliver efficient body filler removal
• Variable speed wheel with 8 speed settings allows the correct speed to be set for different types of material
• Compact and ergonomic design for fatigue-free working
• Lightweight - only 0.95 kg for the tool and 1.35 kg with a M12 HIGH OUTPUT 5.0 Ah battery
• Convenient change of the backing pad by hand without the need for additional tools
• The dust port can be mounted on the left or right side and is therefore suitable for both left and right-handed users
• Universal hook and loop sanding pad allows easy changing of sanding discs
• Vacuum adaptor supplied fits directly to all MILWAUKEE dust extractors
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Flexible battery system: works with all MILWAUKEE M12 batteries

• Flexible battery system: works with all MILWAUKEE M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Tri-LEDs for shadowless work area illumination
• Trigger mode selection for easy one hand selection of speed settings
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• 3,000 RPMs for exceptional application speed
• A weight of 1 kg without battery and a length of 122 mm means better access to tight spaces and less user fatigue
• Best in class power: 542 Nm of fastening and 745 Nm of nut-busting torque to tackle most common applications

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Large Circlip Plier - 1.8mm tip(Straight / 45 deg / 90 deg)
• Medium Circlip Piler - 1.2mm tip(Straight / 45 deg / 90 deg)
• Small Circlip Piler - 0.9mm tip(Straight / 45 deg), 1.2mm tip(90 deg)
• Slip-resistant grips with double-dipped handles
• All metal convertible dial for resistance against wear and prevents reduction in joint integrity
• Easier and quicker internal-external conversion with anti-slip grooved dial

• All Metal Dial

• Part of the PACKOUT™ modular storage system.
• Constructed with impact resistant polymers for jobsite durability.
• Metal reinforced corners.
• Each box comes with a set of Quick-Adjust Dividers that let users fully customise the layout of the drawers for better organisation.
• Locking security bar prevents an unwanted opening of drawers during transit and allows to shut the drawers with a padlock.
• Steel ball bearing slides support up to 11 kg of weight per drawer.
• PACKOUT™ Drawer Tool Box allows for easy access to your tools, even when placed at the bottom of the PACKOUT™ stack.

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE brushless motor REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering  outstanding power run time and durability
• Integrated belt hook and lanyard tie off point
• Maximum control for any material with a 5-step speed dial it is ideal for working with stainless steel and aluminium
• Tool-free die holder and punch change
• Tool-free change of cutting direction in 90dgsteps
• LED lights up your work area for better visibility
• Chip collection bag for a clean working environment
• Auto-control start feature it starts slow and ramps to full speed when the tool detect the user is making a cut
• First 12V Nibbler with max. cutting capacity in mild Steel: 1.6 mm​ in Stainless Steel: 1.2 mm​ in Aluminium: 2.1 mm
• Flexible battery system: works with all MILWAUKEE M12 batteries
• With only 1.6 kg (6.0 Ah battery included) it is the lightest cordless Nibbler on the market while still outperforming 18V brushed competitors

• Fluids sold seperately J02230
• Added value to servicing & MOT work
• Thorough 2-stage solution
• Process complete in just over 1-hour
• Professional system for DPF cleaning
• High-quality long-lasting construction

• Flexible battery system: works with all MILWAUKEE M18 batteries
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• All metal reversible belt clip to hang your tool quickly and easily
• Fuel gauge displays remaining charge
• Brighter LED workspace illumination
• Fastest drilling and driving applications under load
• 13 mm metal chuck for quick bit changes and bit retention
• AUTOSTOP control mode offers enhanced safety for the operator by preventing over-rotation in a bind-up
• Extremely compact design of 175 mm length for access into tight spaces
• Higher power efficiency under load with outstanding torque of 158 Nm

• Bare unit
• 13mm chuck capacity
• 0-33,000 BPM
• 158Nm Max Torque

• Better access
• Unique FOUR FLAT sides
• Flexible head design spanner
• MILWAUKEE ratchet with 90 ratcheting teeth for only 4° of arc swing and stubby handle design for better access.
• FOUR FLAT sides on socket deter rolling and wrench-ready design.
• Flex head ratcheting spanner with 144 tooth count providing an arc swing of 2.5° allowing access in tighter spaces.
• SHOCKWAVE IMPACT DUTY Screwdriver bits

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
• Line-lock-out function to prevent automatic start up
• Rubber front provides most comfortable handling
• Lower angle of battery slot - for better balance & ergonomics compared to previous model
• RAPIDSTOP™– stops all accessories in under the 2 seconds
• Universal reception to fit both, 6 and 8 mm accessories
• Delivering corded performance similar to a 1200 W grinder
• Removable dust screen to prevent debris entrance, prolonging motor life
• Slim handle design
• Spindle lock - increased productivity by reducing the need of 2 wrenches

• Flexible battery system: works with all MILWAUKEE M18 batteries
• REDLINK overload protection electronics in tool and battery pack deliver best in class system durability
• Variable speed trigger for extra control during cutting
• In-Line wrist design for increased control during cutting
• REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
• Belt clip for secure mobility
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• Accurate cuts with maximum cutting depth of 2.0 mm in steel
• Unique 360dgtool-free rotating head with 12 locking positions to access tight spaces and increasing user comfort

• MAXBITE pliers have special jaw geometry for maximum grip.
• Lever release design Traditional release lever for jobsite convenience.
• Rust protection Chrome plated tool increases life by reducing corrosion.
• Hardened jaws Better grip force on jobsite material.
• TORQUE LOCK Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK screw for better and more secure grip. Can also be used for hanging / storage purposes.

• Premium foam for longer durability, laser cut sizes for easy and quick size identification and red background to identify quickly missing tools.
• Fits perfectly into the PACKOUT™Drawer Tool Boxes.
• FOUR FLAT sides on socket for an anti-roll and wrench-ready solution.
• 90 tooth design ratchet with 4Dg of arc swing for tight work spaces.

• Kit Contents; 32pc Shockwave compact bit set
• Kit Contents; Hex key set 9pc
• Kit Contenst; 28pc Chrome Socket set standard 10-24mm & deep 10-19mm- Extnesion 76mm &127mm, ratchet
• Kit Contents; Shockwave adaptor 1/2in. to 1/4in. Hex