Workshop Tools

• 152mm
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• Angled

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Crosshatch jaw design provides extraordinary gripping force with minimal hand pressure
• Lacquer finish for exceptional rust prevention
• Hardened jaws & cutting edges for strength & durability
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• Crosshatch jaw design provides extraordinary gripping force with minimal hand pressure.
• Hardened jaws and cutting edges for strength and durability, lacquer finish for exceptional rust prevention.
• Professional grade pliers are constructed from chrome-moly material and feature comfort grip handles.

• Pliers Combination Slip Joint Pliers 8in.

• Pin-less design for increased durability.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Swivel for access In hard to reach places.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Suitable for the bars with an end on the handle
• Manufactured from CR-MO steel for strength
• Breaker / Power bar head replacement

• Part of PACKOUT™ Shop Storage.
• Constructed with impact resistant polymers.
• Fits in PACKOUT™ Organiser (4932464082) & PACKOUT™ Compact Organiser (4932464083).
• Hangs on PACKOUT™ Wall Mounting Plates.
• Stores screws, tapes and other small items.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

• Lacquer finish for exceptional rust prevention
• Hardened jaws and cutting edges
• Comfort grip handle
• Chrome-moly
• Professional grade

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Resistant to oil, grease and most similar contaminants
• Max working pressure 200PSI
• Fitted with the standard 1/4in. BSP female swivel nuts
• Recoils when slack to help keep work areas tidy
• Coiled high strength, flexible UPVC hose

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• For use on tubeless tyres only
• A temporary repair designed to get you home, no need for any tools or wheel changes
• Larger tyres may require more than one aerosol
• Suitable for tyres up and including 16in.
• 1 aerosol for one tyre, single use product
• Supplied only as a merchandising unit
• Tyre sealant for emergency puncture repair

• Conforms with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012. References to the relevant UK Designated Standards used or references to other technical specifications in relation to which we declare: all requirements for product conformity including any testing and inspections are controlled by Ring Quality Assurance Department under the scope of our ISO 9001:2015 Quality Management System.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Abrasive Belts are suitable for M12 FBFL10 and M12 FBFL13.
• Ceramic grain produces low heat, preventing metal discolouration on stainless steel.
• Suitable for all metals (steel, non ferrous metals, aluminium, titanium and stainless steel).
• For grinding metal weld seams, contours, edges and profiles.
• Ceramic grain quality: Extremely high removal rate with best lifetime.

• Easy Release handle mechanism
• Comfort grip handle
• Heat treated CR-V jaws and CR-MO handle material for added strength and durability

• Precision designed tamper proof 5 star tips ensure eccurate fastener fit
• Includes color coded rail for convenient storage and identification
• TS8H, TS10H, TS15H, TS20H, TS25H, TS27H, TS30H, TS40H, TS45H, TS50H & TS55H
• Mirror polished Chrome plated finish

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 8 mm

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• It has a 14mm Bi-Hex x 65mm 12pt 3/8in. drive and is made from Chrome Vanadium. Also used on other manufacturer's fitted with 8mm Bosch spark plugs such as:
• Renault 1.2 16v
• Peugeot 207 and 307
• Mercedes-Benz M156 engine
• BMW Mini
• BMW E90335I N54 engine 2006
• This specially designed - thin walled Spark Plug Socket with a spring clip to hold the plug is used on most Citroen vehicles