Workshop Tools

• Includes rubber insert to securely hold spark plug and provides additional protection
• Full polish chrome finish provides rust resistance
• Radius cornered 6-point socket design reduces plug wear and improves socket grip
• Spark Plug SAE With Rubber Insert

• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Crosshatch jaw design provides extraordinary gripping force with minimal hand pressure
• Lacquer finish for exceptional rust prevention
• Hardened jaws & cutting edges for strength & durability
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• For use on tubeless tyres only
• A temporary repair designed to get you home, no need for any tools or wheel changes
• Larger tyres may require more than one aerosol
• Suitable for tyres up and including 16in.
• 1 aerosol for one tyre, single use product
• Supplied only as a merchandising unit
• Tyre sealant for emergency puncture repair

• Conforms with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012. References to the relevant UK Designated Standards used or references to other technical specifications in relation to which we declare: all requirements for product conformity including any testing and inspections are controlled by Ring Quality Assurance Department under the scope of our ISO 9001:2015 Quality Management System.

• Pin-less design for increased durability.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Swivel for access In hard to reach places.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished ChromeCorrosion Resistant
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• 6 Point
• 90 Tooth Count
• Polished ChromeCorrosion Resistant
• Corrosion Resistant
• Features a non-slip ratchet end and non-slip open end

• The 90 tooth count gear allows 4 degree arc swing

• Comfort non-slip grip handle provides less fatigue
• Heat treated CR-MO jaws and handle material for added strength and durability
• Easy Release
• Locking

• 7in. Long

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Locking
• Easy Release
• Heat treated CR-MO jaws and handle material for added strength and durability
• Comfort non-slip grip handle provides less fatigue

• 6in. Long

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 8 mm

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Resistant to oil, grease and most similar contaminants
• Max working pressure 200PSI
• Fitted with the standard 1/4in. BSP female swivel nuts
• Recoils when slack to help keep work areas tidy
• Coiled high strength, flexible UPVC hose

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

• Easy Release handle mechanism
• Comfort grip handle
• Heat treated CR-V jaws and CR-MO handle material for added strength and durability

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Abrasive Belts are suitable for M12 FBFL10 and M12 FBFL13.
• Ceramic grain produces low heat, preventing metal discolouration on stainless steel.
• Suitable for all metals (steel, non ferrous metals, aluminium, titanium and stainless steel).
• For grinding metal weld seams, contours, edges and profiles.
• Ceramic grain quality: Extremely high removal rate with best lifetime.

• Locking
• Easy Release
• 9in. Long
• Heat treated CR-MO jaws and handle material for added strength and durability
• Comfort non-slip grip handle provides less fatigue

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 20 mm

• Ergonomic Handle for Added Leverage and Comfort
• Heat-Treated for Strength and Durability
• Chrome Molybdenum Steel
• 90-Degree Tip Angle

• Spark Plug SAE
• Radius cornered 6-point socket design reduces plug wear and improves socket grip
• Full polish chrome finish provides rust resistance
• Includes rubber insert to securely hold spark plug and provides additional protection

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• High carbon alloy steel,Face finish: black+polish,Jaw capacity 42mm Max.
• Grip tie by squeezing lower jaw handle. One hand wrenching.
• Machined parts with 20 smooth position adjustments.
• Press the PUSH button for smooth position adjustments.
• Pinch proof design.