Car Parts & Accessories by Hella

• 1x Hella Lens, rotating beacon (9EL860627-001)
• 1x Hella Timing Belt Kit (9XR854840-001)
• 1x Hella Electric Motor, rotating beacon (9MN862741-001)
• 1x Hella Bulb (8GH002089-251)

• 1x Hella Lens, rotating beacon (9EL860627-001)
• 1x Hella Timing Belt Kit (9XR854840-001)
• 1x Hella Electric Motor, rotating beacon (9MN862741-001)
• 1x Hella Bulb (8GH002089-251)

• 1x Hella Lens, rotating beacon (9EL864074-001)
• 1x Hella Timing Belt Kit (9XR855975-001)
• 1x Hella Bulb (8GH002089-251)

• 1x Hella Lens, rotating beacon (9EL864074-001)
• 1x Hella Timing Belt Kit (9XR855975-001)
• 1x Hella Bulb (8GH002089-251)

Brief Information

*** Original spare part

• 1x Hella Lamp Base (9FT088047-001)
• 1x Hella Lens, tail light (9EL135266-001)

• 1x Hella Lens, tail light (9EL117330-011)

Brief Information

*** Original spare part

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Brief Information

*** Original spare part

Brief Information

*** Original spare part

• 10x Hella Bulb (8GP003594-241)

Brief Information

*** Original spare part

• 1x Hella Lens, tail light assembly (9EL115003-035)

Brief Information

*** Original spare part

• 1x Hella Lens, tail light assembly (9EL115003-035)

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Brief Information

*** Original spare part

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Brief Information

*** Original spare part

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

Technical Information

Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

• 1x Hella Bulb (8GD002078-241)

• 1x Hella Bulb (8GD002078-241)

Technical Information

Instruction 2 - Regarding single or double function lamps wi th LEDs without flasher function In connection with these low powers, which are very differen t from bulb versions, there can be problems during operation on various traction vehicles because further lighting functi ons are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligati on to see for themselves that the lighting equipment is working . Here, too, faulty diagnoses can be a result of the lower pow er levels involved (instrument panel in the driver cab indic ates a bulb failure although the function is working). The functional ability of these light failure checks can onl y be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed di rect current is not permitted! The individual light functions may only be operated with a v ehicle fuse of max. 3A. In the case of onboard current limitation with the values sp ecified above by the onboard control unit an additional fuse for the lamp is not required.

• 1x Hella Cap (9HD980885-018)

Technical Information

Instruction 2 - Regarding single or double function lamps wi th LEDs without flasher function In connection with these low powers, which are very differen t from bulb versions, there can be problems during operation on various traction vehicles because further lighting functi ons are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligati on to see for themselves that the lighting equipment is working . Here, too, faulty diagnoses can be a result of the lower pow er levels involved (instrument panel in the driver cab indic ates a bulb failure although the function is working). The functional ability of these light failure checks can onl y be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed di rect current is not permitted! The individual light functions may only be operated with a v ehicle fuse of max. 3A. In the case of onboard current limitation with the values sp ecified above by the onboard control unit an additional fuse for the lamp is not required.

• 1x Hella Cap (9HD980885-018)

Brief Information

*** Original spare part

• 1x Hella Lens, tail light assembly (9EL113324-001)
• 1x Hella Lamp Base (9FT998007-011)

Brief Information

*** Original spare part

• 1x Hella Lens, tail light assembly (9EL113324-001)
• 1x Hella Lamp Base (9FT998007-011)

Brief Information

*** Original spare part

• 1x Hella Lens, tail light assembly (9EL109139-001)
• 1x Hella Grommet (9GT074132-001)

Brief Information

*** Original spare part

• 1x Hella Lens, tail light assembly (9EL109139-001)
• 1x Hella Grommet (9GT074132-001)