Proud to be a UK-based company
Contact usCar Parts & Accessories by Hella
Categories
Important compatibility info
| Placement on Vehicle | Right |
| Length | 225 mm |
| Height | 73 mm |
| Width | 122 mm |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 2VP 343 640-051 |
| Bulb Type | P21W, R10W |
| Light Function | with taillight, with stop light, with indicator, with reverse light, with reflector |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Tightening Torque | 5 Nm |
| Number of light functions | 5 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Multi-coloured |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Plug Type | Protected contact plug |
| Protection Type (IP Code) | IP5K4K, IPX4K, IPX9K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
- 1x Hella Bulb (8GA002071-131)
- 3x Hella Bulb (8GA002073-121)
- 1x Hella Lens (9EL343142-001)
£34.16
Important compatibility info
| Placement on Vehicle | Right |
| Length | 225 mm |
| Height | 73 mm |
| Width | 122 mm |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 2VP 343 640-051 |
| Bulb Type | P21W, R10W |
| Light Function | with taillight, with stop light, with indicator, with reverse light, with reflector |
| Housing Colour | Black |
| Light Design | Bulb Technology |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Tightening Torque | 5 Nm |
| Number of light functions | 5 |
| Housing Type | Synthetic Material Housing |
| Lens Colour | Multi-coloured |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening, for vertical fastening |
| Plug Type | Protected contact plug |
| Protection Type (IP Code) | IP5K4K, IPX4K, IPX9K |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
- 1x Hella Bulb (8GA002071-131)
- 3x Hella Bulb (8GA002073-121)
- 1x Hella Lens (9EL343142-001)
£34.16
Important compatibility info
| Placement on Vehicle | Left |
| Length | 300 mm |
| Height | 40 mm |
| Width | 130 mm |
| Additional Information 2 | Electromagnetic Compatibility (EMC), with indicator failure control, for CV trailers, for trailer |
| Voltage | 24 V |
| Paired article numbers | 2VP 345 900-021 |
| Plug Type ID | EasyConn 1 x 7 |
| Bulb Type | LED |
| Light Function | with rear fog light (LED), with stop light (LED), with reverse light (LED), with reflector, with indicator (LED), with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 1000 mm |
| Number of light functions | 6 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | Horizontal fastening |
| Plug Type | Male |
| Number of LEDs | 36 |
| LED Colour | Yellow, White, Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
£192.23
Important compatibility info
| Placement on Vehicle | Left |
| Length | 300 mm |
| Height | 40 mm |
| Width | 130 mm |
| Additional Information 2 | Electromagnetic Compatibility (EMC), with indicator failure control, for CV trailers, for trailer |
| Voltage | 24 V |
| Paired article numbers | 2VP 345 900-021 |
| Plug Type ID | EasyConn 1 x 7 |
| Bulb Type | LED |
| Light Function | with rear fog light (LED), with stop light (LED), with reverse light (LED), with reflector, with indicator (LED), with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 1000 mm |
| Number of light functions | 6 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | Horizontal fastening |
| Plug Type | Male |
| Number of LEDs | 36 |
| LED Colour | Yellow, White, Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
£192.23
Important compatibility info
| Placement on Vehicle | Right |
| Length | 300 mm |
| Height | 40 mm |
| Width | 130 mm |
| Additional Information 2 | for trailer, Electromagnetic Compatibility (EMC), for CV trailers, with indicator failure control |
| Voltage | 24 V |
| Paired article numbers | 2VP 345 900-011 |
| Plug Type ID | EasyConn 1 x 7 |
| Bulb Type | LED |
| Light Function | with reverse light (LED), with rear fog light (LED), with reflector, with indicator (LED), with stop light (LED), with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 1000 mm |
| Number of light functions | 6 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Plug Type | Male |
| Number of LEDs | 36 |
| LED Colour | White, Red, Yellow |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
£182.49
Important compatibility info
| Placement on Vehicle | Right |
| Length | 300 mm |
| Height | 40 mm |
| Width | 130 mm |
| Additional Information 2 | for trailer, Electromagnetic Compatibility (EMC), for CV trailers, with indicator failure control |
| Voltage | 24 V |
| Paired article numbers | 2VP 345 900-011 |
| Plug Type ID | EasyConn 1 x 7 |
| Bulb Type | LED |
| Light Function | with reverse light (LED), with rear fog light (LED), with reflector, with indicator (LED), with stop light (LED), with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 1000 mm |
| Number of light functions | 6 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Plug Type | Male |
| Number of LEDs | 36 |
| LED Colour | White, Red, Yellow |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
£182.49
Important compatibility info
| Placement on Vehicle | Left |
| Length | 300 mm |
| Height | 40 mm |
| Width | 130 mm |
| Additional Information 2 | for CV trailers, with indicator failure control, for trailer, Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Paired article numbers | 2VP 345 900-141 |
| Bulb Type | LED |
| Light Function | with reflector, with indicator (LED), with reverse light (LED), with rear fog light (LED), with stop light (LED), with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 6 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Plug Type | Blade Terminal Sleeve |
| Number of LEDs | 12. 6 |
| LED Colour | Yellow, White, Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
£184.48
Important compatibility info
| Placement on Vehicle | Left |
| Length | 300 mm |
| Height | 40 mm |
| Width | 130 mm |
| Additional Information 2 | for CV trailers, with indicator failure control, for trailer, Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Paired article numbers | 2VP 345 900-141 |
| Bulb Type | LED |
| Light Function | with reflector, with indicator (LED), with reverse light (LED), with rear fog light (LED), with stop light (LED), with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 6 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Plug Type | Blade Terminal Sleeve |
| Number of LEDs | 12. 6 |
| LED Colour | Yellow, White, Red |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
£184.48
Important compatibility info
| Placement on Vehicle | Right |
| Length | 300 mm |
| Height | 40 mm |
| Width | 130 mm |
| Additional Information 2 | with indicator failure control, for CV trailers, for trailer, Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Paired article numbers | 2VP 345 900-131 |
| Bulb Type | LED |
| Light Function | with stop light (LED), with indicator (LED), with taillight (LED), with reverse light (LED), with rear fog light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 6 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Plug Type | Blade Terminal Sleeve |
| Number of LEDs | 6. 12 |
| LED Colour | Red, White, Yellow |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
£189.82
Important compatibility info
| Placement on Vehicle | Right |
| Length | 300 mm |
| Height | 40 mm |
| Width | 130 mm |
| Additional Information 2 | with indicator failure control, for CV trailers, for trailer, Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Paired article numbers | 2VP 345 900-131 |
| Bulb Type | LED |
| Light Function | with stop light (LED), with indicator (LED), with taillight (LED), with reverse light (LED), with rear fog light (LED), with reflector |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Cable Length | 500 mm |
| Number of light functions | 6 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Plug Type | Blade Terminal Sleeve |
| Number of LEDs | 6. 12 |
| LED Colour | Red, White, Yellow |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
£189.82
Important compatibility info
| Paired article numbers | 2VP 354 037-021 |
| Light Design | Bulb Technology |
| Additional Information 2 | with bulbs |
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Bulb Type | P21/5W, P21W |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with reflector, with taillight |
| Number of light functions | 6 |
| Function | Tail Light Assembly |
| Voltage | 12 V |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GD002078-121)
- 3x Hella Bulb (8GA002073-121)
£64.28
Important compatibility info
| Paired article numbers | 2VP 354 037-021 |
| Light Design | Bulb Technology |
| Additional Information 2 | with bulbs |
| Placement on Vehicle | Left |
| Additional Information | with bulb holder |
| Bulb Type | P21/5W, P21W |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with reflector, with taillight |
| Number of light functions | 6 |
| Function | Tail Light Assembly |
| Voltage | 12 V |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GD002078-121)
- 3x Hella Bulb (8GA002073-121)
£64.28
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with bulb holder |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 2VP 354 037-011 |
| Bulb Type | P21/5W, P21W |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with reflector, with taillight |
| Light Design | Bulb Technology |
| Number of light functions | 6 |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GD002078-121)
- 3x Hella Bulb (8GA002073-121)
£62.73
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with bulb holder |
| Additional Information 2 | with bulbs |
| Voltage | 12 V |
| Paired article numbers | 2VP 354 037-011 |
| Bulb Type | P21/5W, P21W |
| Light Function | with indicator, with stop light, with rear fog light, with reverse light, with reflector, with taillight |
| Light Design | Bulb Technology |
| Number of light functions | 6 |
| Registration Type | ECE approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GD002078-121)
- 3x Hella Bulb (8GA002073-121)
£62.73
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with bulb holder |
| Additional Information 2 | with bulbs |
| Paired article numbers | 2VP 354 814-011 |
| Bulb Type | LED, W16W, W21W |
| Light Function | with indicator, with stop light (LED), with rear fog light (LED), with reverse light, with taillight (LED) |
| Light Design | LED |
| Number of light functions | 5 |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 2x Hella Bulb (8GA008246-001)
- 1x Hella Bulb (8GA008892-002)
£235.50
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with bulb holder |
| Additional Information 2 | with bulbs |
| Paired article numbers | 2VP 354 814-011 |
| Bulb Type | LED, W16W, W21W |
| Light Function | with indicator, with stop light (LED), with rear fog light (LED), with reverse light, with taillight (LED) |
| Light Design | LED |
| Number of light functions | 5 |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 2x Hella Bulb (8GA008246-001)
- 1x Hella Bulb (8GA008892-002)
£235.50
Important compatibility info
| Placement on Vehicle | Rear Fitting |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with marker lamp (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting |
| Quantity | 2 |
| Cable Length | 500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Power Consumption | 0.5 W |
| Number of LEDs | 2 |
| LED Colour | Red |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£42.20
Important compatibility info
| Placement on Vehicle | Rear Fitting |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Function | with marker lamp (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | mounting |
| Quantity | 16 |
| Cable Length | 500 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Power Consumption | 0.5 W |
| Number of LEDs | 2 |
| LED Colour | Red |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£20.06
Important compatibility info
| Placement on Vehicle | Right, Lateral Mounting |
| Additional Information | with bulb holder |
| Light Function | with marker lamp |
| Housing Colour | Black |
| Mounting Type | mounting |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| LED Colour | White |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Brief Information
*** Original spare part
£12.53
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Additional Information | with bulb holder |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | T4W |
| Light Function | with marker lamp |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 1 |
| Lens Colour | Red/Black |
| Registration Type | ECE approved, ADR/GGVS approved |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Front-facing part of lens clear, rear-facing part red. Two ST3.5 x 16-C. fixing screws. Front-facing part of lens black, rear-facing part red. Version 2XS 005 020-041 with 15.5 mm dia. hole for wire. Without grommet
Brief Information
*** Original spare part
- 1x Hella Lens, clearance light (9EL132215-011)
£10.70
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Additional Information | with bulb |
| Voltage | 12 V |
| Bulb Type | T4W |
| Light Function | with marker lamp |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 1 |
| Lens Colour | Crystal clear, Red |
| Registration Type | ECE approved, ADR/GGVS approved |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
- 1x Hella Bulb (8GP002067-121)
- 1x Hella Lens (9EL132215-001)
£8.62
Important compatibility info
| Placement on Vehicle | Right, Lateral Mounting |
| Additional Information 2 | with pipe |
| Voltage | 12 V. 24 V |
| Number of Poles | 2 -pin connector |
| Plug Type ID | EasyConn |
| Bulb Type | LED |
| Light Function | with position light (LED), with taillight (LED), with side marker light (LED) |
| Light Design | LED |
| Connector Shape | Angled |
| Cable Length | 500 mm |
| Number of light functions | 3 |
| Registration Type | ECE approved, ADR/GGVS approved |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£39.84
Important compatibility info
| Placement on Vehicle | Right, Lateral Mounting |
| Voltage | 12 V. 24 V |
| Plug Type ID | Quick Link |
| Bulb Type | LED |
| Light Function | with position light (LED), with taillight (LED), with side marker light (LED) |
| Light Design | LED |
| Cable Length | 500 mm |
| Number of light functions | 3 |
| Registration Type | ADR/GGVS approved, ECE approved |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£40.81
Important compatibility info
| Placement on Vehicle | Left, Lateral Mounting |
| Voltage | 12 V. 24 V |
| Number of Poles | 2 -pin connector |
| Plug Type ID | EasyConn |
| Bulb Type | LED |
| Light Function | with position light (LED), with taillight (LED), with side marker light (LED) |
| Light Design | LED |
| Cable Length | 500 mm |
| Number of light functions | 3 |
| Registration Type | ADR/GGVS approved, ECE approved |
| Number of LEDs | 4 |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£38.65
Important compatibility info
| Placement on Vehicle | Left, Right, Lateral Mounting |
| Additional Information 2 | with pipe |
| Voltage | 12 V. 24 V |
| Number of Poles | 2 -pin connector |
| Plug Type ID | EasyConn |
| Bulb Type | LED |
| Light Function | with position light (LED), with taillight (LED), with side marker light (LED) |
| Light Design | LED |
| Cable Length | 500 mm |
| Number of light functions | 3 |
| Registration Type | ECE approved, ADR/GGVS approved |
| Protection Type (IP Code) | IP6K9K |
| Number of LEDs | 4 |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£35.52
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Additional Information 2 | without bulbs |
| Voltage | 24 V |
| Bulb Type | R5W |
| Light Function | with marker lamp |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 1 |
| Lens Colour | Milk White, Red, White |
| Registration Type | ECE approved, ADR/GGVS approved |
| Type | Clearance Light |
| Function | Clearance Light |
Additional Information
- 1x Hella Lens, end outline marker light (9EL950315-061)
- 1x Hella Lens, end outline marker light (9EL950315-031)
- 1x Hella Cable Set, tail light assembly (8KA950073-001)
£13.24
Important compatibility info
£27.28
Important compatibility info
£27.28
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | with pipe, with bolts/screws |
| Voltage | 12 V. 24 V |
| Bulb Type | LED |
| Light Design | LED |
| Mounting Type | Fitting |
| Cable Length | 500 mm |
| Lens Colour | Crystal clear |
| Number of screws | 2 |
| Power Consumption | 0.5 W |
| Protection Type (IP Code) | IP6K6 |
| Number of LEDs | 2 |
| LED Colour | White |
| Type | Door Entry Light |
| Function | Door Entry Light |
Additional Information
- 1x Hella Sealing/Protective Cap (9HD980858-008)
£25.37
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 92 mm |
| Width | 140 mm |
| Diameter | 140 mm |
| Additional Information 2 | without bulbs, with synthetic disc |
| Voltage | 12 V. 24 V |
| Bulb Type | P21W |
| Light Function | with reverse light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | mounting |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved, ADR/GGVS approved |
| Fastening Type | for horizontal fastening |
| Plug Type | Blade Terminal |
| Type | Reverse Light |
| Fulfils ECE norm | R23 |
| Function | Reverse Light |
Additional Information
- 1x Hella Lens, reverse light (9ES106588-001)
- 1x Hella Holder (9XD997909-801)
£31.31
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023