Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1 439 392 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Outer diameter | 44 mm |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Spanner Size | 13 |
| Additional Information | with lock nut |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with adjuster |
| Placement on Vehicle | Right Front |
| Extra Description | febi Plus |
| Paired article numbers | 199070 |
| Operating Mode | Electric |
| Function | Door Lock |
| Type | Door Lock |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer Restriction | WZ |
| Type | Door Lock |
| Extra Description | febi Plus |
| Function | Door Lock |
| Number of Connectors / Ports | 5 |
| Paired article numbers | 1000518 |
| Operating Mode | Electric |
| Additional Information | with adjuster |
| Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with adjuster |
| Number of Connectors / Ports | 5 |
| Paired article numbers | 1000517 |
| Function | Door Lock |
| Operating Mode | Electric |
| Placement on Vehicle | Right Rear |
| Extra Description | febi Plus |
| Manufacturer Restriction | WY |
| Type | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Internal Thread Size | M10 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| Extra Description | febi Plus |
| for OE number | 11 42 7 797 405 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40840 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (22385)
- 2x Febi Screw (40807)
- 2x Febi Washer (37906)
- 3x Febi Nut (37905)
Important compatibility info
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
| Length | 158 mm |
| Spanner Size | 21 |
| Function | Tie Rod End |
| Cone Size | 17 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Valve stem diameter | 6 mm |
| Valve head diameter | 23.4 mm |
| Length | 104 mm |
| Function | Exhaust Valve |
| Type | Exhaust Valve |
| Notches / Holes Number | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with spacer plate |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Sensor, exhaust pressure |
| Function | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 375 mm |
| Height | 29 mm |
| Width | 167 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Placement on Vehicle | Left Front, Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| for OE number | 21 52 6 758 829 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 50 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Outer diameter | 17.8 mm |
| Length | 51 mm |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 132 mm |
| Oil Fill Quantity | 175 ml |
| Number of grooves | 8 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
| for OE number | 21184142 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 210.7 mm |
| Width | 108.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Seal Kit, multi-valve |
| Function | Seal Kit, multi-valve |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Cone Size | 32 mm |
| Rod/Strut | Push Rod |
| Additional Information | with nuts |
| Thread Size | M27 x 1,5 |
| Length | 507 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, camshaft position |
| Number of Connectors / Ports | 3 |
| Length | 55 mm |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 479 mm |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Height | 169 mm |
| Width | 296 mm |
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Cable Length | 274 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
| for OE number | 4G0 615 121 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 610 mm |
| Type | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 173172 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Number of Coils | 6.5 |
| Wire Diameter | 10.8 mm |
| Placement on Vehicle | Rear Axle |
| Length | 320 mm |
| Outer diameter | 108 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Inner diameter 2 | 80 mm |
| Inner diameter 1 | 24 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 99 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175391)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Width | 66.9 mm |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15.4 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Length | 131.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 140 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
| Extra Description | febi Plus |
| for OE number | 164 320 12 04 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 16 mm |
| Additional Information | with oil, with oil drain plug, with oil filter |
| Number of Teeth | 103 |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (194073)
- 1x Febi Cover, timing belt (184651)
- 1x Febi Oil Filter (109018)
- 1x Febi Screw Plug, oil sump (48907)
- 2x Febi Engine Oil (172204)
Important compatibility info
| for OE number | 651 070 28 87 |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Injector Nozzle |
| Type | Injector Nozzle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 82 mm |
| Material | Rubber |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 80 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 12 V |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 186 mm |
| Height | 25 mm |
| Length | 187 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Filter, cabin air |
| Function | Filter, cabin air |
| Filter type | Activated Carbon Filter |
| Width | 180 mm |
| Height | 36 mm |
| Length | 250 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 106 mm |
| Material | Thermoplast |
| Inner diameter 1 | 40 mm |
| Inner diameter 2 | 90 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175654)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186663, 186735 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Paired article numbers | 44215 |
| Type | Tie Rod |
| Function | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (44213)
- 1x Febi Inner Tie Rod (31524)
- 1x Febi Nut (21557)
Important compatibility info
| Spanner Size | 29 |
| Number of Connectors / Ports | 2 |
| Colour Coding | Black |
| Temperature range from | 90 °C |
| Temperature range to | 95 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 19 |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| External Thread Size | M12 x 1,75 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Dust Cover | with dust cover |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 48 mm |
| Outer diameter | 68 mm |
| Inner diameter | 35 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with drive shaft bolt |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 395.5 mm |
| Length | 626 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 10 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 184 mm |
| Eject Force | 510 N |
| Placement on Vehicle | both sides |
| Housing Diameter | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| for OE number | 06 36 059 |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 3 |
| Function | Sensor, exhaust pressure |
| Type | Sensor, exhaust pressure |
| for OE number | 51908411 |
| Sensor Type | Differential Pressure Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Sliding Door, Right |
| Material | Plastic |
| Colour | Black |
| Type | Exterior Door Handle |
| Extra Description | febi Plus |
| Function | Exterior Door Handle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| Min. Length | 629 mm |
| ABS Ring Diameter | 85 mm |
| Wheel Sided Joint Diameter | 93.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 514 mm |
| Max. Length | 514 mm |
| Min. Length | 319 mm |
| Pipe Diameter | 48 mm. 38.5 mm |
| Mounting points diameter | 14 mm. 12 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































