Hose & Pipe

• Euro Universal Female Adaptor
• British Standard Pipe (BSP) Thread
• Zinc Clear Finish
• Compatible with other popular air line fittings

• Plastic pipe joiners
• Suitable for fluid transfer
• Straight reducer 12mm - 8mm
• Various sizes available
• Pack of 5 pieces

• Single action
• Steel construction
• Corrosive resistant finish
• Benchmark in the UK for quality and reliability
• Designed for fixed applications

• Thread size: R 1/4
• Thread Type: Male
• Nominal bore: 4.8 mm
• Flow rate: 43 cfm @ 100 psi
• Maximum working pressure: 14 bar / 200 psi
• Temperature range: -40°C to 100°C

• Double action
• Protective shoulder helps to prevent dirt penetration
• Steel construction
• Corrosive resistant finish
• Ideal for use in the garage and tyreshop environments
• Designed for trailing hose applications

• Thread size: R 1/4
• Thread type: Male
• Nominal bore: 4.8 mm
• Flow rate: 43 cfm @ 100 psi
• Maximum working pressure: 14 bar / 200 psi
• Temperature range: -40°C to 100°C

• Airline connector
• Parallel thread
• Pack of 5

• BSP Thread
• Stepped Tail piece
• For use with Connect Fastflow Airline Couplings & compatible with other popular airline couplings
• Integral adaptor

• Aluminium air duct hose
• Flexible hose makes for easier routing
• Heat resistant from -40 to +250 degrees celsius

This fuel hose with clips from Pearl Automotive is 7.5mm. It comes in a 1m length made from NBR/PVC with polyester outside suitable for leaded and unleaded fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Supplied with two clips with an outer braided covering
• Made from NBR /PVC with polyester outer suitable for leaded/unleaded and diesel engine non injection

• Fuel hose 7.5mm inside diameter 1m

• Constructed of plastic that will connect two hoses
• Straight Push-Fit

This roll of heater hose from Pearl Automotive is 5/8 inch hose (16mm). It comes in a 1m length made from MBR.CR suitable for use with vehicle heater systems.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Suitable for automotive heating systems with a temperature range of -40 Deg C to + 110 Deg C
• Black EPDM Resistant to Weather Ozone

• Heater hose & clips 5/8in. x 1m Made from EPDM rubber

• Euro Universal Male Adaptor
• Zinc Clear Finish
• Compatible with other popular air line fittings

• Push Fit Connector
• Metric Sizes
• ISO9001:2008
• Qty: 5

• Single nut adjustment
• Smooth band protects hose
• Bridge piece ensures 360 deg seal
• Solid trunion maximises torque
• Assembly by manual or automatic tools
• Chromium VI free finish on all materials
• Mild steel zinc plated

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• The original worm drive hose clip
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• Mild steel zinc protected

• Double action
• Protective shoulder helps to prevent dirt penetration
• Steel construction
• Corrosive resistant finish
• Ideal for use in the garage and tyreshop environments
• Designed for trailing hose applications

• Temperature range: -40°C to 100°C
• Maximum working pressure: 14 bar / 200 psi
• Flow rate: 43 cfm @ 100 psi
• Nominal bore: 4.8 mm
• Thread type: Male
• Thread size: R 1/2

• Aluminium air duct hose
• Flexible hose makes for easier routing
• Heat resistant from -40 to +250 degrees celsius

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• Single nut adjustment
• Smooth band protects hose
• Bridge piece ensures 360 deg seal
• Solid trunion maximises torque
• Assembly by manual or automatic tools
• Chromium VI free finish on all materials
• Mild steel zinc plated

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These heavy duty metal hose clips come as a pack of 10 size 2 60mm hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards
• Made from mild steel zinc plated
• Pack of 10

• Push Fit Connector
• Metric Sizes
• ISO9001:2008
• Qty: 5