Important compatibility info
| Placement on Vehicle | Rear Axle |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Link/Coupling Rod, stabiliser bar (21356)
- 4x Febi Nut (22263)
- 2x Febi Screw (32561)
Important compatibility info
| Placement on Vehicle | transmission sided |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 190 mm |
| Thickness | 13 mm |
| Inner diameter | 160 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 80 mm |
| Surface | Phosphatized |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 148 mm |
| Length | 180 mm |
| Thickness | 128 mm |
| Inner diameter | 54 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | without rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 148 mm |
| Length | 180 mm |
| Thickness | 127 mm |
| Inner diameter | 54 mm |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | without rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 182597 |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Inner diameter | 12 mm |
| Material | Sheet Steel |
| Length | 298 mm |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 108 |
| Timing Chain Size | G67HP, G67HR |
| Function | Timing Chain |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | PU (Polyurethane), Thermoplast |
| Inner diameter | 20.5 mm |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, radiator |
| Thickness | 82 mm |
| Function | Mounting, radiator |
| Length | 140 mm |
| Width | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Dryer Cartridge, compressed-air system |
| Outer diameter | 136 mm |
| Thread Type | with right-hand thread |
| Height | 163 mm |
| Internal Thread Size | M41 x 1,5 |
| Type | Air Dryer Cartridge, compressed-air system |
| Additional Information 2 | with integrated oil separator, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 22 mm |
| Inner diameter | 32 mm. 19 mm |
| Type | Connecting Rod, air compressor |
| Function | Connecting Rod, air compressor |
| Hole Spacing | 85.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | Chromed |
| Placement on Vehicle | Front, Interior Door Panel, Left |
| Material | Plastic |
| Paired article numbers | 179427 |
| Type | Door Handle, interior equipment |
| Extra Description | febi Plus |
| Function | Door Handle, interior equipment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 177405 |
| Material | Plastic |
| Type | Door Handle, interior equipment |
| Extra Description | febi Plus |
| Placement on Vehicle | Interior Door Panel, Front, Right |
| Function | Door Handle, interior equipment |
| Surface | Chromed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Lower, Front, Rear Axle Left, Rear Axle Right |
| Material | Steel |
| External Thread Size | M12 x 1,25 |
| Additional Information 2 | with nut, with bearing, with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 60 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid |
| Number of Ribs | 7 |
| Function | Alternator Freewheel Clutch |
| Inner diameter | 17 mm |
| Outer diameter | 60 mm |
| Type | Alternator Freewheel Clutch |
| for OE number | 271 155 02 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 44 32 311 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 130.9 mm |
| Width | 69 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 236 mm |
| Thickness | 35.3 mm |
| Brake Disc Thickness | 12.5 mm |
| Minimum thickness | 9.7 mm |
| Bolt Hole Circle Diameter | 102 mm |
| Centering Diameter | 86 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 13 mm |
| Length | 312 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 147 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle |
| External Thread Size | M10 x 1,5 |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Inner diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 22 36 531 48R |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 15 mm. 14 mm |
| Outer diameter | 52 mm. 47 mm |
| Inner diameter | 25 mm. 20 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Bearing Type | Rolling Bearing |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wire Diameter | 12.8 mm |
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 354 mm |
| Outer diameter | 156 mm |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid |
| Width | 37.6 mm |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 30 mm |
| Paired article numbers | 102670 |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Height | 41.06 mm |
| Length | 268 mm |
| Placement on Vehicle | Front Axle Left, Upper, Front |
| Additional Information 2 | with rubber mount, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 72 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Adjustable | Adjustable |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 80 mm |
| Function | Spring Clamp |
| External Thread Size | M24 x 3 |
| Type | Spring Clamp |
| Width | 103 mm |
| Length | 270 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Outer diameter | 228 mm |
| Thickness | 45.8 mm |
| Brake Disc Thickness | 10.8 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Knock Sensor |
| Type | Knock Sensor |
| for OE number | 1 132 002 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 178077 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178076 |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 153.9 mm |
| Width | 61.1 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hole Spacing | 130 mm |
| Steering arm type | for trailing arm |
| Additional Information 2 | with spacer disc, with retaining ring |
| Mounting points diameter | 19 mm |
| Type | Repair Kit, control/trailing arm |
| Function | Repair Kit, control/trailing arm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 85 mm |
| Length | 166 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 90 |
| Timing Chain Size | G44HCF |
| Function | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 12 mm |
| Width of castor bearing surface | 32 mm |
| Type | Deflection/Guide Pulley, V-ribbed belt |
| Function | Deflection/Guide Pulley, V-ribbed belt |
| Inner diameter | 12 mm |
| Outer diameter | 75 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 172153 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 1070 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 239 mm |
| Thickness | 33.4 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Height | 275 mm. 119 mm |
| Outer diameter | 119 mm |
| Inner diameter | 37 mm |
| Filter type | Filter Insert, Centrifuge |
| Inner diameter 1 | 16 mm |
| Outer diameter 1 | 97 mm |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Additional Information | with gasket/seal |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control Valve, camshaft adjustment (170182)
- 1x Febi Seal, camshaft adjustment (47377)
- 3x Febi Screw (100646)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 114.2 mm |
| Width | 63.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 452 mm |
| Placement on Vehicle | Rear Axle |
| Height | 32 mm |
| Function | Cover Sheet, brake drum |
| Inner diameter | 145 mm |
| Type | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 13 |
| Housing Diameter | 24 mm |
| Placement on Vehicle | both sides |
| Stroke | 100 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, air deflector |
| External Thread Size | M8 x 1 |
| Length 1 | 335 mm |
| Length 2 | 346 mm |
| Type | Gas Spring, air deflector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Actuator, fuel filler flap |
| Number of Connectors / Ports | 2 |
| Type | Actuator, fuel filler flap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































