Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Plastic |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.31 kg |
| Width of castor bearing surface | 29 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Weight | 0.199 kg |
| Number of Connectors / Ports | 6 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 651 090 01 48 |
| Number of Connectors / Ports | 4 |
| Weight | 0.194 kg |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.70
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Weight | 7.7 kg |
| Function | Centre Rod Assembly |
| Pipe Diameter | 50 mm |
| Cone Size | 26 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 40 mm |
| Length | 857 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Type | Multi-Function Switch |
| Function | Multi-Function Switch |
| Placement on Vehicle | Driver side |
| Number of Connectors / Ports | 12 |
| Combi Switch Function | Window Regulator, Heated wing mirror on/off |
| Weight | 0.122 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Additional Information | with lids |
| Weight | 2.393 kg |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 50 mm |
| Cone Size | 31.5 mm |
| Driver Position | for right-hand drive vehicles |
| Outer diameter | 50 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Weight | 14.5 kg |
| Extra Description | ProKit |
| Rod/Strut | Push Rod |
| Length | 1822 mm |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Additional Information | with fastening/mounting material |
| Extra Description | febi Plus |
| Weight | 0.358 kg |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| for OE number | 11 61 7 501 566 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (26100)
- 1x Febi Hose, crankcase ventilation (46301)
- 1x Febi Hose, crankcase ventilation (47223)
- 1x Febi Hose, crankcase ventilation (36680)
- 1x Febi Hose, crankcase ventilation (33113)
£101.71
Important compatibility info
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
| Weight | 14.1 kg |
| Length | 1680 mm |
| Placement on Vehicle | Front Axle |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Weight | 0.956 kg |
| Inner length 1 | 778 mm |
| Inner length 2 | 798 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Outer length 1 | 1112 mm |
| Outer length 2 | 1139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Weight | 11.1 kg |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 953 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M38 x 1,5 LHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Weight | 0.869 kg |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1.2 kW |
| Weight | 3.162 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Length | 824 mm |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Weight | 8.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Length | 1580 mm |
| Weight | 10.37 kg |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.370 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1688 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 28.6 mm |
| Weight | 12.5 kg |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 42 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Weight | 3.32 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 108820 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179214 |
| Weight | 6.700 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.75
Important compatibility info
| Min. Length | 562 mm |
| Additional Information 2 | with screw |
| Weight | 6.358 kg |
| External Teeth, Wheel Side | 37 |
| External Teeth, Diff.Side | 27 |
| Wheel Sided Joint Diameter | 89 mm |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 82.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.76
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.210 kg |
| for OE number | 22 11 6 775 905 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.84
Important compatibility info
| Weight | 0.468 kg |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Operating Mode | Mechanical |
| Number of Connectors / Ports | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.85
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 294 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Weight | 6.8 kg |
| Number of mounting bores | 1 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.88
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 522 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 10.062 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.92
Important compatibility info
| Weight | 0.97 kg |
| Number of Connectors / Ports | 4 |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Function | Wiper Motor |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.95
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Weight | 1.600 kg |
| Operating Pressure | 11 bar |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.95
Important compatibility info
| Hole Spacing | 115 mm |
| Weight | 10.50 kg |
| Placement on Vehicle | Rear Axle |
| Length | 552 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.96
Important compatibility info
| Weight | 10.10 kg |
| Placement on Vehicle | Rear Axle |
| Length | 522 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.97
Important compatibility info
| Brake Type | Disc Brake |
| Weight | 8.5 kg |
| Parameter | Typ 24/24 |
| Stroke | 64 mm |
| Type | Spring-loaded Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Function | Spring-loaded Cylinder |
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Rear Axle both sides |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.97
Important compatibility info
| Weight | 5.100 kg |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| External Thread Size | M18 x 1,5 |
| for OE number | 960 241 21 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.02
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.193 kg |
| Cable Length | 1840 mm |
| Number of circuits | 4 |
| External Thread Size | M18 x 1,5 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.05
Important compatibility info
| Weight | 0.539 kg |
| Function | Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 118 |
| Width | 16 mm |
| Type | Timing Belt Kit |
| Replaces | 49370 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47947)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (47600)
- 1x Febi Tensioner Pulley, timing belt (49559)
- 2x Febi Bolt, tensioner pulley (180196)
£102.07
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 9.86 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 66.3 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| for OE number | 34 20 6 797 605 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.08
Important compatibility info
| Weight | 0.782 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 144 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49768)
- 1x Febi Tensioner, timing chain (171517)
- 1x Febi Guide, timing chain (106677)
- 1x Febi Guide, timing chain (106799)
£102.09
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Weight | 0.150 kg |
| Spanner Size | 22 |
| Cable Length | 700 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Placement on Vehicle | after catalytic converter |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.13
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Right |
| Material | ACM (Polyacrylate) |
| Colour | Black |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Additional Information 2 | with quick couplers |
| Weight | 0.478 kg |
| Hose Length | 330 mm |
| Turbocharger line | Turbocharger to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.14
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 3.641 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 678 mm |
| Min. Length | 415 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Replaces | 20383 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.17
Important compatibility info
| Weight | 1.16 kg |
| Additional Information | with gaskets/seals |
| Number of Connectors / Ports | 5 |
| for OE number | 25620-0R022 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.18
Important compatibility info
| Operating Mode | Electric |
| Function | EGR Valve |
| for OE number | 14956-00Q1A |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
| Weight | 1.037 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.21
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 660 mm |
| Material | Steel |
| Steering arm type | Trailing Arm |
| Bore Diameter | 16.6 mm |
| Weight | 6.850 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.21
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Right |
| Material | FPM (fluoride rubber), FVMQ [fluorosilicone rubber) |
| Outer diameter | 66 mm |
| Inner diameter | 64 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Turbocharger line | Turbocharger to charge air cooler |
| Weight | 0.573 kg |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.29
Important compatibility info
| Weight | 2.888 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.32
Important compatibility info
| Weight | 4.711 kg |
| External Thread Size | M40 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right |
| Length | 237 mm |
| Outer diameter | 40 mm. 53 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35086)
£102.35
Important compatibility info
| Weight | 1.800 kg |
| Placement on Vehicle | Front Axle |
| Length | 173 mm |
| Height | 39 mm |
| Width | 39 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (109533)
- 1x Febi Bush, kingpin (108227)
- 2x Febi Lock Ring, steering knuckle (109458)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (108376)
- 2x Febi Lock Ring, steering knuckle (109459)
- 2x Febi Circlip, kingpin (10553)
- 1x Febi Spacer, kingpin (46072)
- 1x Febi Spacer, kingpin (46073)
- 1x Febi Spacer, kingpin (46074)
- 1x Febi Spacer, kingpin (46075)
- 1x Febi Spacer, kingpin (46076)
- 1x Febi Spacer, kingpin (46077)
- 1x Febi Spacer, kingpin (46078)
- 1x Febi Spacer, kingpin (46079)
- 1x Febi Spacer, kingpin (46080)
- 1x Febi Bush, steering knuckle (107408)
- 1x Febi Seal Ring, steering knuckle (46070)
£102.35
Important compatibility info
| Function | Cylinder Liner, air compressor |
| Weight | 1.0 kg |
| Type | Cylinder Liner, air compressor |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.37
Important compatibility info
| Type | Cylinder Head, air compressor |
| Weight | 1.24 kg |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.37
Important compatibility info
| Weight | 0.3 kg |
| Colour | Black |
| Number of Connectors / Ports | 20 |
| Combi Switch Function | with indicator function, with rear wipe-wash function, with wipe-wash function, with high beam function, with headlight flasher |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.42
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Weight | 9.31 kg |
| Outer diameter | 273 mm. 210 mm |
| Thickness | 156 mm. 606 mm |
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.43
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 775 mm |
| Shock Absorber Type | Oil Pressure |
| Min. Length | 455 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Mounting points diameter | 16 mm |
| Weight | 3.64 kg |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.400 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 297 mm |
| Min. Length | 207 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023