Important compatibility info
Weight | 4.8 kg |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 715 mm |
Min. Length | 430 mm |
Pipe Diameter | 63 mm. 75 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 16 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.390 kg |
Placement on Vehicle | Front and Rear, Front Axle |
Length | 95 mm |
Material | Rubber/Metal |
Outer diameter | 44 mm |
Inner diameter | 16 mm |
Type | Bush, spring eye |
Function | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1115 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Weight | 0.145 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 105 mm |
Material | Metal |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.230 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 25 |
Paired article numbers | 182627 |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
Min. Length | 857 mm |
Wheel Sided Joint Diameter | 86 mm |
Transmission-side joint diameter | 79 mm |
Type | Drive Shaft |
External Teeth, Diff.Side | 24 |
Function | Drive Shaft |
Additional Information | with Split Pin |
Placement on Vehicle | Front Axle Right |
Weight | 7.194 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 21.3 kg |
Rim Hole Number | 10 -Hole |
Outer diameter | 376 mm |
Thickness | 57.5 mm |
Brake Disc Thickness | 45 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 39 mm |
Bolt Hole Circle Diameter | 190 mm |
Surface | Coated |
Function | Brake Disc |
Placement on Vehicle | Rear Axle |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1130 mm |
Number of Ribs | 6 |
Weight | 0.990 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28926)
- 1x Febi Belt Tensioner, v-ribbed belt (27835)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (47861)
Important compatibility info
Function | Cable Pull, clutch control |
Type | Cable Pull, clutch control |
Weight | 0.330 kg |
Inner Length | 387 mm |
Outer Length | 590 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.0 kg |
Length | 876.5 mm. 561 mm |
Mounting points diameter | 40 mm |
Function | Shock Absorber, steering |
Pipe Diameter | 50 mm. 60 mm. 34 mm |
Stroke | 313 mm |
Cone Size | 18 mm |
External Thread Size | M14 x 1,5 |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Pressure converter, turbocharger |
Voltage | 12 V |
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 2 |
Weight | 0.20 kg |
Function | Pressure converter, turbocharger |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Length | 215 mm |
Paired article numbers | 106846 |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Weight | 0.779 kg |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Material | NBR (nitrile butadiene rubber) |
Weight | 0.048 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.4 kg |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 666 mm |
Weight | 0.2 kg |
Housing Diameter | 18 mm |
Eject Force | 490 N |
Stroke | 200 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 378.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.382 kg |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Colour | Black |
Weight | 0.040 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Height | 40 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 02635 |
Weight | 0.400 kg |
Placement on Vehicle | Front Axle Right |
Function | Tie Rod End |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with screw |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Cable Length | 125 mm |
Function | Connector Cable, camshaft sensor |
Weight | 0.027 kg |
Extra Description | febi Plus |
Type | Connector Cable, camshaft sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.588 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 188 mm |
Inner diameter | 173 mm |
Number of Teeth, ABS ring | 100 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint, with bearing |
Weight | 2.402 kg |
Additional Information | with lock nut |
Material | Aluminium |
Cone Size | 19 mm |
Placement on Vehicle | Lower, Front, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M16 x 1,5 |
Steering arm type | Control Arm |
Paired article numbers | 180550 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023