Locks

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID67 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID67 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• Key will facilitate a transponder which will allow the vehicle to start once programmed
• Manual Key blank without remote electronics
• Made of durable plastic

• Key will facilitate a transponder which will allow the vehicle to start once programmed
• Manual Key blank without remote electronics
• Made of durable plastic

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID65 - 4D
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• This chip is only suitable for lost key programming due to the 33 logic.
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: EEPROM
• Reference: ID70 (33)
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• This chip is suitable for lost key programming due to the 53 logic.
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: EEPROM
• Reference: ID70 (53)
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• This chip is only suitable for spare key programming due to the B3 logic.
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID70 (B3)
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Key will facilitate a transponder which will allow the vehicle to start once programmed
• Manual Key blank without remote electronics
• Made of durable plastic

• Key will facilitate a transponder which will allow the vehicle to start once programmed
• Manual Key blank without remote electronics
• Made of durable plastic

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Blade: VA2
• This item is non-returnable once cut
• Key blades are the metal part of the key that is cut specifically to each car.
• Battery: None
• Frequency: None
• Buttons: 2 Buttons (Lock & Unlock)
• Transponder: None

• This product is suitable for remotes that have a separate battery and circuit board

• Sometimes will operate other features such as the headlights.
• Blade: HU83
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Battery: None
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Headlights)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Key cases are most often used to repair damaged keys by swapping the PCB board from an existing remote.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut
• Profile: NSN14/NSN19

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Blade: HU100R
• This item is non-returnable once cut
• Key blades are the metal part of the key that is cut specifically to each car.
• Frequency: None
• Battery: None
• Buttons: None
• Transponder: None

• This blade is designed to fit into M-Sport Style BMW Remotes, also called Knife or Sail shape. Such as our AUTRK0096 or AUTRK0174.

• Sometimes will operate other features such as the headlights.
• Blade: SIP22
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None
• Battery: None

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• This item is non-returnable once cut
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut
• This blade is designed for Volkswagen Touareg slot-in-dash and keyless remotes such as our AUTRK0132 or AUTRK0176.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut

• This product is suitable for Honda smart remotes such as our AUTRK0158.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut
• This blade is designed for Volkswagen, Seat and Skoda MQB Keyless remotes such as our AUTRK0105.

• Sometimes will operate other features such as the headlights.
• Blade: HU189T (HU100)
• Battery: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Frequency: None
• Buttons: 2 Buttons (Lock & Unlock)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: HU189T (HU100)
• Battery: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None

• These keys do not have PCB boards and do not have remote functions. They do have a transponder chips.
• Battery: None
• Manual keys are keys used to open and start the vehicle through the lock/ignition barrel.
• Blade: HYN10
• Buttons: None
• Transponder: None
• Manual keys are often used as a spare key as they are much cheaper than remote keys, however some vehicles only have manual keys.
• Frequency: None

• Sometimes will operate other features such as the headlights.
• Blade: None
• This item is non-returnable once cut
• Remote heads are for Remote keys which are the typical modern vehicle key and come with buttons to operate the central locking features.
• Battery: None
• Frequency: None
• Buttons: 2 Buttons (Lock & Unlock)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Battery: Battery terminals only
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: HU83
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Battery: None
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: HU66
• Battery: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: None
• This item is non-returnable once cut
• Remote heads are for Remote keys which are the typical modern vehicle key and come with buttons to operate the central locking features.
• Battery: None
• Frequency: None
• Buttons: 2 Buttons (Lock & Unlock)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: HU101
• Battery: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: VA2
• This item is non-returnable once cut
• Remote keys are the typical modern vehicle key and come with buttons to operate the central locking features.
• Battery: None
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Headlight)
• Transponder: None

• This is only for remotes which have batteries off the board

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Blade: HU66
• This item is non-returnable once cut
• Key blades are the metal part of the key that is cut specifically to each car.
• Battery: None
• Frequency: None
• Buttons: None
• Transponder: None

• This is a blade section and contains no internals

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Blade: TOY43
• This item is non-returnable once cut
• Key blades are the metal part of the key that is cut specifically to each car.
• Battery: None
• Frequency: None
• Buttons: 2 Buttons (Lock & Unlock)
• Transponder: None

• This case does not include the transponder, rubber button insert, circuitry or a battery. You can swap these from an existing remote. The screw for the blade is included.

• Sometimes will operate other features such as the headlights.
• Blade: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Battery: None
• Frequency: None
• Buttons: 2 Buttons (Lock & Unlock)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: HU101
• Battery: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Frequency: None
• Buttons: 2 Buttons (Lock & Unlock)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: None
• Battery: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Blade: HU101
• Battery: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Frequency: None
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None

• Sometimes will operate other features such as the headlights.
• Battery: None
• Frequency: None
• Remote key cases are for the typical modern vehicle key and come with buttons to operate the central locking features.
• Buttons: 3 Buttons (Lock, Unlock & Boot)
• Transponder: None
• Key cases are most often used to repair damaged keys by swapping the PCB board from an existing remote.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut
• Hight quality

• Key will facilitate a transponder which will allow the vehicle to start once programmed
• Manual Key blank without remote electronics
• Made of durable plastic

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Programming: Diagnostically
• Reference: ID4C T3
• Transponder Type: Glass
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut
• This blade is suitable for Kia three button smart remotes. Different models of Kia use different blade profiles and these have different mountings within the remotes. Please check fitment before purchase

• There are many types of key blades however typically automotive manufactures will use the same blade profile across large parts of their vehicle range.
• Key blades are the metal part of the key that is cut specifically to each car.
• This item is non-returnable once cut
• Please check fitment before purchase
• Different models of Kia use different blade profiles and these have different mountings within the remotes
• This blade is suitable for Kia three button smart remotes. Different models of Kia use different blade profiles and these have different mountings within the remotes. Please check fitment before purchase

• They can either be built onto the PCB (On-Board) or housed separately in the key (Off-Board).
• This chip is also compatible with older 40bit systems.
• Transponder chips are the part of the key that connect with the immobiliser and are often either carbon or glass.
• Reference: T17 ID/4D63 80bit
• Transponder Type: Carbon
• Transponder chips work by forming a ‘handshake’ between the vehicle key and the vehicle itself via an aerial near the ignition barrel.
• Programming: Diagnostically