Workshop Tools

• Special angle design of grooves provides firm and precise drive.
• Chrome Moly,Face finish: polish,Jaw Capacity 34.5mm Max.
• Uses a unique high frequency process for jaws.
• Heat treated rivet joint.
• Forged groove undercut.
• Heavy duty type.

• Made from durable Cr-V with rugged black phosphate finish for long life and added strength
• Long arm for better access in hard to reach areas
• Short hex arm for added torque
• Color coded hex key holder for convenient storage and identification
• Black Phosphate Finish

• 0

• Audi: A1 Citycarver (GBH), A1/A1 Sportback (8XA/8X1), A1/A1 Sportback (8XF/8XK)(15-), A3 Cabrio (8V7/8VE), A3 Saloon (8VM/8VS), A3/A3 Sportback (8VA/8V1/8VK/8VF) A4 (8W2/8W5), Q2 (GAB), Q3 (8UB/8UG/F3B), S3 Saloon (8VS)(13-16), SEAT: Alhambra (711)(15-), Arona (KJ7)(17-), Ateca (KH7)(16-20), Ateca (KH7/KHP)(16-), Ibiza (6J1/6J5/6J8) Ibiza (6P1/6P5/6P8)(15-), Leon (5F1/5F5)(12-), Leon ST (5F8/KL8)(13-), Leon/ST (5F1/5F5/5F8), Tarraco (KN2)(19-), Toledo (KG3)(12-), Skoda: Fabia III/Estate (NJ3/NJ5)(14-) Kamiq (NW4)(19-), Karoq (NU7)(17-), Kodiaq (NS7)(17-), Kodiaq (NV7)(18-), Octavia III (5E3/5E5)(13-), Octavia IV (NX3/NX5)(20-), Rapid (NH3/NK3/NK6), Rapid Spaceback (NH1)(13-) Scala (NW1)(19-), Superb III (3V3/3V5)(15-), Yeti (5L6)(13-), Yeti Outdoor (5L7)(13-), Volkswagen: Golf SV/Sportsvan (AM1)(14-), Golf SV/Sportsvan (AN1)(17-), Golf VII (5G1/BQ1) Golf VII Estate (BA5/BV5), Jetta (162/163), Passat (3G2/3G5)(14-), Passat (CB2/CB5)(19-), Passat Alltrack (3G5)(15-), Polo (6C1/6R1), Polo (AW1)(17-), Scirocco (138)(14-), Sharan (7N2)(15-) T-Cross (C11)(19-), T-Roc (A11)(17-), Tiguan (AD1)(16-), Tiguan Allspace (BW2)(17-), Touran (5T1)(15-)
• CHZA, CHZB, CHZC, CHZD, CHZE, CHZF, CHZG, CHZJ, CHZK, CHZL, DKJA, DKLA, DKLB, DKLC, DKLD, DKRA, DKRB, DKRC, DKRD, DKRE, DKRF CJZA, CJZB, CJZC, CJZD, CYVA, CYVB, CYVC, CYVD, CHPA, CHPB, CMBA, CPTA, CPVA, CPVB, CPWA, CRJA, CUKB, CUKC, CVNA, CXSA, CXSB CZCA, CZCB, CZCC, CZDA, CZDB, CZDD, CZEA, DGEA, DGEB, DJKA, DJKD, DJVA
• C5143 is a Tensioner Adjuster Wrench used across a wide range of VAG Belt driven engine applications as part of the Timing Belt Removal/Installation process.
• Audi, SEAT, Skoda, VW
• Equivalent to OE reference: T10499A

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Socket Rails 1/4" 3/8" 1/2" 3pc. Socket Rails 1/4" 3/8" 1/2" 3pc

• Rail size: 1/2in., 3/8in. & 1/4in. drive
• 14 socket spaces per rail
• 3 piece socket rail set

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

• Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
• Ball detent for a secure hold onto sockets.
• Anti-roll protection due to TRI-LOBE design.
• Ergonomically shaped TRI-LOBE handle design to comfortable apply high torque.

• 15 degree angled open end for greater access
• Radius cornered offset chamfered box end provides precise fastener control
• 12 Point
• Mirror polished Chrome plated finish

• Also suitable for use with regulators from other brands
• Allows one regulator to be used on multiple types of gas bottles

• Velcro backing pad for a fast and easy polishing sponge change within seconds
• Fits with both MILWAUKEE® M18 FUEL™ Random Orbital Polishers - M18 FROP15 & M18 FROP21

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which is not possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.9mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Deep Socket
• Impact
• 6 Points Socket
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Phosphate with Yellow rubber coating

• Rust protection: Chrome plated tool increases life by reducing corrosion.
• Lever release design: Traditional release lever for jobsite convenience.
• TORQUE LOCK™: Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
• Hardened jaws: Better grip force on jobsite material.

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished ChromeCorrosion Resistant
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished ChromeCorrosion Resistant
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

• Holes in rail are on top and on the bottom for easy mounting.
• Usable with impact and chrome sockets.
• Metal ball detent clip for superior socket retention.
• Compatible with standard and deep sockets removable end caps for easy clip removal.
• Flexible interchangeable rails and clips for customisation of ¼? ¾? and ½? drive sockets.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which isn’t possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.8mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Suitable for higher torque fastening applications, fits directly onto 1/2in. impact tools.
• One-piece design TX bit and socket with 1/2in. internal square drive reception according to DIN 3121 / ISO 1174-2.

• Suitable for higher torque fastening applications, fits directly onto 1/2in. impact tools.
• One-piece design HEX bit and socket with 1/2in. internal square drive reception according to DIN 3121 / ISO 1174-2.

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Jaw design provides exceptional gripping force.
• Compact design is great for accessing tight areas.
• Professional grade pliers constructed from chrome-moly material
• Comfort grip handles
• Positive joint engagement.
• Lifetime Warranty

• Diesel only
• Refill fluid hose
• Can be used for multiple refills

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Chrome Molybdenum Alloy Steel
• Phosphate Outer Finish