Workshop Tools

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Mini design allows for greater accessibility
• Spring-loaded design reduces user fatigue.
• Professional grade pliers constructed from chrome-moly material
• Spring loaded handle design
• Lifetime Warranty
• Comfort non slip handle

• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Audi: A1 Citycarver (GBH), A1/A1 Sportback (8XA/8X1), A1/A1 Sportback (8XF/8XK)(15-), A3 Cabrio (8V7/8VE), A3 Saloon (8VM/8VS), A3/A3 Sportback (8VA/8V1/8VK/8VF) A4 (8W2/8W5), Q2 (GAB), Q3 (8UB/8UG/F3B), S3 Saloon (8VS)(13-16), SEAT: Alhambra (711)(15-), Arona (KJ7)(17-), Ateca (KH7)(16-20), Ateca (KH7/KHP)(16-), Ibiza (6J1/6J5/6J8) Ibiza (6P1/6P5/6P8)(15-), Leon (5F1/5F5)(12-), Leon ST (5F8/KL8)(13-), Leon/ST (5F1/5F5/5F8), Tarraco (KN2)(19-), Toledo (KG3)(12-), Skoda: Fabia III/Estate (NJ3/NJ5)(14-) Kamiq (NW4)(19-), Karoq (NU7)(17-), Kodiaq (NS7)(17-), Kodiaq (NV7)(18-), Octavia III (5E3/5E5)(13-), Octavia IV (NX3/NX5)(20-), Rapid (NH3/NK3/NK6), Rapid Spaceback (NH1)(13-) Scala (NW1)(19-), Superb III (3V3/3V5)(15-), Yeti (5L6)(13-), Yeti Outdoor (5L7)(13-), Volkswagen: Golf SV/Sportsvan (AM1)(14-), Golf SV/Sportsvan (AN1)(17-), Golf VII (5G1/BQ1) Golf VII Estate (BA5/BV5), Jetta (162/163), Passat (3G2/3G5)(14-), Passat (CB2/CB5)(19-), Passat Alltrack (3G5)(15-), Polo (6C1/6R1), Polo (AW1)(17-), Scirocco (138)(14-), Sharan (7N2)(15-) T-Cross (C11)(19-), T-Roc (A11)(17-), Tiguan (AD1)(16-), Tiguan Allspace (BW2)(17-), Touran (5T1)(15-)
• CHZA, CHZB, CHZC, CHZD, CHZE, CHZF, CHZG, CHZJ, CHZK, CHZL, DKJA, DKLA, DKLB, DKLC, DKLD, DKRA, DKRB, DKRC, DKRD, DKRE, DKRF CJZA, CJZB, CJZC, CJZD, CYVA, CYVB, CYVC, CYVD, CHPA, CHPB, CMBA, CPTA, CPVA, CPVB, CPWA, CRJA, CUKB, CUKC, CVNA, CXSA, CXSB CZCA, CZCB, CZCC, CZDA, CZDB, CZDD, CZEA, DGEA, DGEB, DJKA, DJKD, DJVA
• C5143 is a Tensioner Adjuster Wrench used across a wide range of VAG Belt driven engine applications as part of the Timing Belt Removal/Installation process.
• Audi, SEAT, Skoda, VW
• Equivalent to OE reference: T10499A

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Chrome Molybdenum Alloy Steel
• Phosphate Outer Finish

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Chrome Molybdenum Alloy Steel
• Phosphate Outer Finish

• Easy Release handle mechanism
• Comfort grip handle
• Heat treated CR-V jaws and CR-MO handle material for added strength and durability

• Chrome moly jaws inproved strength and durability
• Red and Yellow handles symbolize the international colour for safety.
• Ergonomic handle design provides comfort during use.
• Insulated handle allows you to work aournd 1,000 Volt AC or 1,500 Volt DC projects.
• Professional grade pliers constructed from chrome-moly material
• Ergonomic dual layered TPR handles
• Protects from electrical shock
• Lifetime Warranty

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Comfort non slip grip provides the user good control when using.
• Professional grade pliers constructed from chrome-moly material
• Comfort non slip handles
• Lifetime Warranty
• Serrated jaws

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

• Includes Blow Mold Case
• 3/4 x 13/16, 7/8 x 15/16 in., 19 x 21 mm, 3 in. Extension
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Black Phosphate

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished ChromeCorrosion Resistant
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished ChromeCorrosion Resistant
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Holes in rail are on top and on the bottom for easy mounting.
• Usable with impact and chrome sockets.
• Metal ball detent clip for superior socket retention.
• Compatible with standard and deep sockets removable end caps for easy clip removal.
• Flexible interchangeable rails and clips for customisation of ¼? ¾? and ½? drive sockets.

• Made from durable Cr-V with rugged black phosphate finish for long life and added strength
• Long arm for better access in hard to reach areas
• Short hex arm for added torque
• Color coded hex key holder for convenient storage and identification
• Black Phosphate Finish

• 0

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Jaw design provides exceptional gripping force.
• Compact design is great for accessing tight areas.
• Professional grade pliers constructed from chrome-moly material
• Comfort grip handles
• Positive joint engagement.
• Lifetime Warranty

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 10 mm

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Includes Tips: @0-Degree: 0.95 & 1.2mm, 1.2 & 1.8mm @45-Degree: 1.2mm @90-Degree: 1.2mm
• External: 6 - 20mm
• Internal: 8 - 24mm
• Heavy-Duty Return Spring
• Convert from Working with External to Internal Snap Rings

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 180 Positon Ratcheting Mechanism
• Anti-Slip and radius corners on open end
• Mirror Polish Finish

• ASME Compliant

• Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
• Ball detent for a secure hold onto sockets.
• Anti-roll protection due to TRI-LOBE design.
• Ergonomically shaped TRI-LOBE handle design to comfortable apply high torque.

General Information

Motorcycle Tyre Lever 380mm

• Specially designed angle of blade for use on motorcycles
• Made from Chrome Molybdenum for strength
• Fitted with an aluminium handle
• Essential tool
• Also for use on quad tyres etc.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.