Workshop Tools

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet ANSI, DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• 180 degrees flex head & extra long beam offers extreme reach and loads of leverage.
• Ratcheting box ends are designed to accommodate a variety of fasteners including both 6-and 12-point nuts.
• Reversible wrenches feature an easy-to-use reversing mechanism
• Wrenches feature a sleek, offset-head design for tight access points, slim dimensions for confined areas.

• Air flow rate - 12L/min
• Max wattage - 100W
• Max amperage - 8A
• 12V DC power supply - plugs directly into cagarette lighter socket 
• Handy accessory holder - air bed adaptor, ball adaptor and tyre valve adaptor
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Automatic pre-set shut off 
• Super bright LED night light
• Large precision digital display
• High speed inflation - 3.5 mins (0-36PSI/175/65/R14)

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Magnetic holding prevents wear down and enables secure hold.

• Suitable for air & water
• Temp -10C to + 60C
• 21 BAR
• Comes with Yellow Stripe
• 15m coil
• 8.0mm (5/16in.)

General Information

Brake Caliper Rewind Tool Kit. Brake Caliper; Rewind Tool.

• Adaptor 2 - Most Ford, Mazda, Mitsubishi, Toyota - 32.5mm PCD, 6mm diameter pins
• Adaptor 1 - Most popular Japanese and European vehicles - 22mm PCD, 6mm Diameter pin
• Compete with reaction plate and adaptors number 1 and 2
• For use on disc brake calipers fitted to most European and Japanese cars with right handed thread

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

General Information

Plastic Sump Plug Removal Tool PSA/Ford

General Information

EU Registered Design

• 200mm Long Nose Pliers
• 178mm HD Diagonal Pliers
• 250mm Groove Joint Pliers

• Long Nose Pliers offer crosshatch jaw design for stronger grip

General Information

Deep Impact Socket 3/4"D 32mm

• Manufactured from Chrome Molybdenum
• Available in range 19mm - 46mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 3/4in. drive

• A heavy-duty, all steel solid forged trenching shovel which is ideal for digging narrow trenches when laying cables or pipes
• Metal YD handle with a wooden cross dowel for comfort
• Size: No 2
• Blade: 290 x 225mm

• Normal point shaped cutting tip with 118dg angle.
• High speed steel rollforged metal drill bits produced according to DIN 338.
• Suitable for drilling in steel cast iron alloyed and non-alloyed material up to 800 N/mm².
• Type N flute normal angle.
• Colour: black.
• Oxide coating enables quick swarf removal.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Socket - Specialist 50mm 1/2"D. Socket - Specialist 50mm 1/2"D

• Chrome Vanadium
• 37mm drive depth, 56mm internal depth, 68mm external diameter
• Specifically introduced for service and maintenance on Renault gearboxes

• Deep Metric Socket Set
• 6 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• The unique single pawl design prevents the Gear from slipping during high-speed turning.
• The ratchet gear mechanism head is and designed with High-grade Cr-MO material, providing extra strength and durability.
• The tool has a Super Rust-Resistant finishing, proven through a Salt Spray Test that lasted over 72 hours.
• The handle features a unique ergonomic design made of two components for enhanced comfort.
• The 120-Tooth reversible ratcheting mechanism allows for a minimal sweep of 3 degrees, enabling usage in tight spots.
• The Heavy Duty New Index Flex head mechanism offers the option to fix the head or use it in a flexed position.

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet ANSI, DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• 180 degrees flex head & extra long beam offers extreme reach and loads of leverage.
• Ratcheting box ends are designed to accommodate a variety of fasteners including both 6-and 12-point nuts.
• Reversible wrenches feature an easy-to-use reversing mechanism
• Wrenches feature a sleek, offset-head design for tight access points, slim dimensions for confined areas.

• 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19 mm
• Deep Metric Socket Set
• 6 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Supplied with adapters for cycle tyres, sports balls and inflatables
• 60cm hose with screw-on adapter valve
• Ergonomic rubber tread plate
• Robust, heavyweight construction
• Large LCD digital display
• Dual display in PSI and BAR
• Digital gauge accurate to +/- 1PSI

• Time saver
• Easy visibility
• Quality tool
• Master tyre pressure gauge with angled head for easy access and visibility 10-100PSI / 05 - 7BAR

• Impact rated 6 point chrome molybdenum sockets
• 3 alloy wheel sockets to cover the most popular sizes for a 1/2in. impact wrench
• Storage case complete with individual labelled moulds for each socket size
• All PCL sockets exceed ANSI specifications
• Features two grease rings for superior user grip
• Centre hole is punched through for extra depth on the work surface
• Offers Z-Drive, contacting the flat walls of fasteners for stronger grip
• Thin wall design with chamfered openings for easier mating to fasteners