Workshop Tools

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Flexible material allows for easy install and removal.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Deep Metric Socket Set
• 6 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Manual provided
• in.Weight: 8.4kg in.
• in.360 degree lifting saddle in.
• in.Fitted with swivel castor wheel for ease of positioning in.
• in.Includes extension handle in.
• Lifting range: 135mm to 330mm

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Steel reinforced handle for higher durability.
• Precision balanced design and over molded handle for more control and better grip.
• High-performance cover preventing damage to surfaces.
• Steel shot-filled head for increased rebound reduction and maximised impact.

• High quality hot-forging process provides a performance exceeding ASME standard
• Set contains 11 popular 12 points metric sizes for technician
• High visibility color filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 180° pivoting head for greater access to tight spaces.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

General Information

Torch with Heat Shrink Tubing Set 162pc Torch with Heat Shrink Tubing Set 162pc.

• Impact resistant polymer construction.
• Connects to all Milwaukee PACKOUT™ modular storage.
• Turn the PACKOUT™ into a stationary storage.
• 4 5kg floor mounted weight capacity.
• 22 kg wall mounted weight capacity.
• Multiple mounting configurations.

General Information

Timing Tool Kit - Ford 1.25, 1.4, 1.6 16V, 1.5, 1.6 TI-VCT

• Made in Sheffield
• Also relevant to the Mazda and Volvo ranges
• Suitable for use with the following replacement belt kits INA530014010, Contitech CT881K2, Gates K025433XS
• This kit includes the alignment tool for VVT system found on many of these engines which extends the kits coverage from 1996 to 2010
• The essential camshaft and crankshaft alignment tools for the popular 1.25, 1.4, 1.6 Ford, petrol, engines

• Simple and easy to use, ideal for general low volume tyre inflation
• Has a durable alloy body and Euro style valve connector, and comes complete with operating instructions
• General purpose tyre inflator with an all Alloy body with a rubber protected gauge

• Reading Accuracy: 2 psi / 0.1 bar / 10 kPa Calibration: 10-210 psi / 0.7-15 bar Maximum Inlet Pressure: 15 bar Hose length: 0.85 m Tyre Valve Connection: Euro Clip-on Inlet Thread: G 1/4 l/min

General Information

Camshaft Locking Tool - Seat. Camshaft Locking Tool - Seat

• An additional knob/handle is incorporated in the tool to assist with precision alignment
• The Camshaft setting bracket can be offered to the camshaft slot by sliding it along the dowel screws
• This time saving product from Laser means essential timing adjustment can take place with the Vacuum Pump and Cam cover still in place
• This revised Camshaft Setting Bracket for VWs now gives even better alignment with 2 ground shoulder screws included in the set

• Personalized Foam Tray
• 90-Degree Tip Angle with 0.090in./2.3 Tip Size, Fits 31 - 82mm Circlip Sizes
• 90-Degree Tip Angle with 0.070in./1.8 Tip Size, Fits 18 - 48mm Circlip Sizes
• 90-Degree Tip Angle with 0.047in./1.2 Tip Size, Fits 12 - 25mm Circlip Sizes
• 90-Degree Tip Angle with 0.038in./1.0 Tip Size, Fits 8 - 18mm Circlip Sizes
• Ergonomic Handle for Added Leverage and Comfort
• Handles Internal and External Circlips
• Heat-Treated for Strength and Durability
• Chrome Molybdenum Steel

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Inflates a tyre in 3.5 minutes*
• Clear, back lit digital display with high contrast screen
• Easily check how far along the inflation is with the dynamic progress bar
• Memory function remembers the set pressure for next use
• 60cm air hose allows easy access, wherever the tyre valve is positioned
• Bright LED light directed where you need it most
• 3 meter power cable with easy wind-up internal storage
• Valve storage stem to ensure valve caps aren't lost during inflation
• Included 3 piece valve adaptor kit securely stored inside the inflator

• Textured nose maintains control when grabbing and twisting with serrated nose.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• HOOK AND PICK SET 4PC

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Auto start Piezo ignition
• Swirl flame for more even heat distribution, wrapping around the target
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1610 C) gas torch
• Auto lock on and dead man trigger

• Conforms to BS:EN521

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Brake Caliper Wrench E24 - HGV MAN TGA, TGS, TGX.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

• Slim shank diameter for access to low lying screw applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Anti role 3 sided collar on the handle
• VDE tested to 10 000 V and guaranteed to 1,000 V.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.

• Slim shank diameter for access to low lying screw applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Anti role 3 sided collar on the handle
• VDE tested to 10 000 V and guaranteed to 1,000 V.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 7 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.