Workshop Tools

General Information

Injector Dismantling Tool - for Bosch

• Tamperproof
• 10mm Hex
• Made in Sheffield
• Suitable for removing the internal part of Bosch Injectors

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

• Part of a range of Deep Impact Sockets in 1in. drive
• Deep Impact socket
• Available in range 22mm - 70mm
• Manufactured from Chrome Molybdenum

General Information

Deep Impact Socket 3/4"D 41mm

• Part of a range of Deep Impact Sockets in 3/4in. drive
• Deep Impact socket
• Available in range 19mm - 46mm
• Manufactured from Chrome Molybdenum

General Information

Deep Impact Socket 3/4"D 30mm

• Part of a range of Deep Impact Sockets in 3/4in. drive
• Deep Impact socket
• Available in range 19mm - 46mm
• Manufactured from Chrome Molybdenum

General Information

Diesel Engine Timing Tool - Fiat 2.3 JTD Diesel Engine Timing Tool - Fiat 2.3 JTD.

• The 23 JTD twin camshaft Common Rail diesel engine is belt driven between crankshaft and inlet camshaft but utilises a chain to connect both camshafts
• The high pressure fuel pump does not require timing
• This kit includes the latest Crankshaft Timing Pin required on engines produced from 2006-2008
• This kit includes the latest crankshaft timing pin
• An engine timing locking tool set for fiat ducato 23 JTD with engine codes: F1AE0481C, F1AE0481D, F1AE0481N 2002 to 2008 and the Fiat 30JTD with engine code F1CE0481D

• 3/4in. drive
• 29mm
• Impact quality
• Manufactured from Molybdenum

• Combination Spanner made from Chrome Vanadium
• Part of the Jumbo range of spanners
• A 560mm long combination spanner

General Information

Diesel Injector Seat Cutter Set

• 15mm flat cutter with 19mm external diameter for other makes
• 17mm angles cutter with 21mm external diameter for Fiat, Iveco
• 17mm flat cutter with 17mm external diameter for BMW, PSA, Renault
• The 17mm Flat cutter with 17mm external diameter for BMW/Peugeot/Renault19mm Angled cutter with 21mm external diameter for Fiat/ Iveco
• Set of 4 cutters for re-cutting injector seats when reconditioning diesel engines or replacing the injectors 15mm Flat cutter for universal applications

• Set of Castors for 4508A

General Information

Tensioner Wrench - VAG Tensioner Wrench - VAG.

• Multi purpose tensioner
• Five adjustable positions for use on many Volkswagen Audi Group models
• The tool is designed to offer further access where access is restricted
• 4mm Hex Key required to adjust the positioning
• 18mm pin centres/3mm pins

General Information

Engine Timing Tool Kit - Vauxhall/Opel;, Engine Timing Tool Kit - Vauxhall/Opel.;

• Zafira-B 1.6 16v with engines Z16LET & Z16XEP 2003-2007
• Meriva (VXR)
• Astra-H
• Astra-G
• Opel
• Vauxhall
• Camshaft alignment pin (KM 6340) and tensioner locking pin (KM 6333) for:

General Information

Timing Tool Kit - Focus CMax. Timing Tool Kit - Focus CMax

• This five piece set is essential for replacing the Cam belt on Ford Focus/Cmax 1.6 Ti-VCT with engine code HXDA (2003-2007) plus 2.0 TDCi with engine codes G6DA - G6DB - G6DC 2003-2007. Set includes:
• Camshaft Sprocket Holding Tool (OEM 303-1097)
• Tensioner Pulley Locking Pin (OEM 303-1054)
• Flywheel Timing Pin (OEM 303-1059)
• Crankshaft Timing Pin (OEM 303-748)
• Camshaft Sprocket Locking Tool (OEM 303-735)

General Information

Timing Tools - Land Rover/Jaguar V6. Timing Tools - Land Rover/Jaguar V6

• Camshaft sprocket timing pins 303-1126
• Camshaft Sprocket aligning tool 303-1132
• Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
• Engine Code 276D T 2004-2007
• Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions

• Cup type oil filter wrench 86 mm x 9 Flutes suitable for:
• Alfa Romeo (petrol/diesel)
• Volkswagen
• Fiat
• Seat
• Renault
• Mercedes

General Information

Engine Timing Tool Kit - Ford 1.4/1.5/1.6 TDCi, PSA 1.4/1.6. Engine Timing Tool Kit - Ford 1.4/1.5/1.6 TDCi, PSA 1.4/1.6

• Crankshaft locking tool
• Crankshaft alignment tool
• Camshaft alignment tool
• This engine timing tool kit is suitable for Ford Focus 1.4 | 1.6 TDCi chain engines with codes G8DA | G8DB | HNDA 2004-2006.The kit includes:

General Information

Locking Tool Set - Diesel Engines. Locking Tool Set - Diesel Engines

• Ford TDDi, TDCi in 18 Fiesta Turbo, Focus, Transit
• For setting the timing chain see Part No 4173
• Includes locking strap, flywheel locking tool, TDC setting screw and camshaft sprocket puller
• Supplied in storage case

General Information

Timing Tools - VAG 3cyl 6/12 valve. Timing Tools - VAG 3cyl 6/12 valve

• 6v/12v 12v tools are OEM T10123 x2 and T10121x1 with AZQ/BME Engine codes and 6v require T10120x1 and T1021x1 for AWY/BMD engine codes
• 2 and 3 cylinder
• Timing tools for Volkswagen Lupo and Polo 1.2 litre engines

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

General Information

Timing Pins - Renault engines. Timing Pins - Renault engines

• OEM codes MOT 1489/1054/1430, Mercedes 607 589 01 15 00, 607 589 00 15 00
• For Flywheel locking on Mercedes Benz Citan use Laser 3203 (starter motor removal required)
• Renault engine code K9K (2002-on), Mercedes 607951 (K9K) (2012 on)
• Popular with the Nissan Micra 15 Dci
• Crankshaft and Camshaft timing pin set for Renault 15 and 19 DCi engines fitted to Laguna, Kangoo and Clio models