Workshop Tools

• Essential for routine service on modern vehicles
• The paper filter can then be replaced successfully
• Plus Renault Megane, Laguna 15, 19, 22, 25 DCi engines and Mercedes-Benz
• For Citroën and Peugeot vehicles including Citroën Visa Dti, AX, Saxo, ZX Xantia and Peugeot 205, 306, 309, 405, 406, 806 models
• Removes the outer casing of eco-oil filters without damage

General Information

Engine Timing Tool Kit - for Ford Duratorq Diesel

• 2.4 Tdi Transit (00-08)
• Plus 2.0 TDCi Tdi Transit (00-08)
• Also 2.0 TDCi Mondeo chain engine, 2.2 TDCi Mondeo (04-07)
• For 1.4 TDCi Fiesta and Fusion 2002-2009)
• A special 4 piece kit containing the necessary special pins for 2.0 and 2.4 litre chain driven engines
• Allows removal and replacement of timing belts/chains on the Ford Duratorq engines

• For use on Lambda sensors (oxygen sensors) on most modern cars This tool covers a wide variety of options and fits most heated and non-heated sensors
• Sizes: 1/2in.D: 29mm x 90mm long, 27mm x 85mm long, 22mm x 50mm long, 3/8in.D: 11/16in. x 74mm long, 22mm (7/8in.) x 80mm long, 22mm (7/8in.) x 90mm long, 22mm (7/8in.) x 30mm long
• Suitable for most modern cars including: Audi, BMW, Citroën, Ford, Mercedes-Benz, Peugeot, Renault, Skoda, Vauxhall, Volkswagen
• Manufactured from Chrome Molybdenum

General Information

Scraper Set - 4pc Scraper Set - 4pc.

• Stainless steel blades high quality blades in four sizes Ideal for removing gaskets from cylinder heads, carburettors etc or for removing stickers from windscreens
• 4 sizes Complete with pound thru' shafts
• Soft grip handle
• Can be used as a chisel with a hammer

• This new size plug spanner has been introduced for some French cars and has a extra long T-handle for deep seated access
• Socket is manufactured from Chrome Vanadium, T-handle in S45C Steel
• Use on Renault Clio
• 14mm single Hex with rubber insert

• This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines
• Agila, Astra-G/H, Combo-C, Corsa-B/C/D, Meriva-A, Tigra-B
• For 1.0 12v X10XE and 1.2 16v X12XE engines
• With X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codes
• Chain driven engines
• 1993-2010

General Information

Timing Tool Kit - for BMW, Land Rover

• This set enables the correct timing to be made when servicing the BMW M47 20 16 engines
• Upgrade component for M57, M47S available separately - Part No 5166 (OEM 11 5 180/11 6 080)
• Land Rover Freelander TD4 - M47 - 200002
• Also available in a metal storage case - Part No 4536

General Information

Camshaft Locking Tool - Seat. Camshaft Locking Tool - Seat

• An additional knob/handle is incorporated in the tool to assist with precision alignment
• The Camshaft setting bracket can be offered to the camshaft slot by sliding it along the dowel screws
• This time saving product from Laser means essential timing adjustment can take place with the Vacuum Pump and Cam cover still in place
• This revised Camshaft Setting Bracket for VWs now gives even better alignment with 2 ground shoulder screws included in the set

• A professional socket set complete with a full compliment of accessories including ratchet, extension bars, spark plug sockets (10 & 14mm), universal joint and 17 standard sockets plus 8 deep sockets in 1/2in. drive
• Deep and standard sockets
• Manufactured from Chrome Vanadium
• Professional ratchet
• Supplied in a blow mould storage case

General Information

Tap and Die Set - Metric 51pc Tap and Die Set - Metric 51pc.

• Sliding T-bar tap wrench
• Manufactured from Alloy Steel and with split dies, this set is aimed at the professional user

General Information

Combination Spanner 33mm Combination Spanner 33mm.

• Manufactured from Chrome Vanadium
• Satin finish
• Professional combination spanner
• Bi-Hex
• Satin finished spanner

• Socket manufactured from Chrome Vanadium, bit from Silicon Steel
• 1/2in.D
• Further socket sizes available in this range T7-T50
• Individually packaged Star Bits

• Individually packaged Star Bits
• 1/2in. drive
• 100mm
• Size T25
• Manufactured from Chrome Vanadium

• Satin finished spanner
• Bi-Hex
• Professional combination spanner
• Satin finish
• Manufactured from Chrome Vanadium

• Impact quality
• One piece forging for strength
• Black finished chrome vanadium
• 3/8in. drive
• T40-T60 sizes available

General Information

External Circlip Pliers - Bent 175mm

• Soft, smooth grip handles
• 175mm long, 15mm tip Opening dimensions: 30mm
• Hardened and tempered tips

• For expanding and fitting external circlips

General Information

Long Series Tamperproof Star Bit 1/2"D T30

• A special bit designed for use on air bag retaining screw on a variety of vehicles

General Information

Camshaft Sprocket Holding Tool Camshaft Sprocket Holding Tool.

• Reduces potential damage to the camshaft
• Holds the sprocket whilst releasing the fastener
• A multi application wrench with variable adjustment.

• For use on brake systems that do not use anchor pines - mostly imported cars
• Selected steel
• Black finish
• Time saver

• Ideal for extra leverage on tight nuts
• Manufactured from Chrome Vanadium
• Consumable item