Workshop Tools

• 180 position mechanism provides 2 degree swing arc for tight access areas
• 1.5 times ASME standard torque provides strength for the professional user
• Patented anti-slip open end provides secure grip on new and worn fasteners
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• Audi, SEAT, Skoda, VW
• Audi: A1/A1 Sportback (8XA/8X1)(10-15), A3 Cabrio (8P7), A3/A3 Sportback (8PA/8P1), S1/S1 Sportback (8XA/8X1), SEAT: Alhambra (710), Altea/Altea XL (5P1/5P5/5P8), Cordoba (6L2), Ibiza (6J1/6J5/6J8/6L1), Leon (1P1), Toledo (5P2/KG3), Skoda: Fabia II (542/545), Octavia II (1Z3/1Z5), Praktik (5J7), Rapid (NH3) Rapid Spaceback (NH1)(13-), Roomster (5J7), Superb II (3T4/3T5), Yeti (5L6)(13-), Yeti/Yeti Outdoor (5L7)(13-), Volkswagen: Beetle/Coccinelle/Maggiolino (5C1/5C7), Caddy/Caddy Maxi (2K_/2C_), CC (358), Eos (1F7/1F8), Golf Plus (521/5M1), Golf V/Estate (1K1/1K5), Golf VI Estate (AJ5), Golf VI/Cabrio(5K1) Jetta (162/1K2)(05-14), Jetta (163)(14-), Passat (362/365), Passat (3C2/3C5), Passat CC (357), Polo (6R1), Polo (9N1/9N2/9N3), Scirocco (137), Scirocco (138)(14-) Sharan (7N1), Tiguan (5N1/5N2), Touran (1T1/1T2/1T3)
• CBZA, CBZB, CBZC, AXU, BKG, BLG, BLN, BMY, BWK, CAVA, CAVB, CAVC, CAVD, CAVE, CAVF, CAVG, CAXA, CAXC, CDGA, CKMA, CMSB, CNVA, CTHA, CTHB, CTHC CTHD, CTHE, CTHF, CTHG, CTJB, CTJC, CTKA, BAG, BLF, BLP, BTS, CFNA, CFNB, CLRA, CNKA
• Equivalent to OE Reference: T10060A, T10170A, T10171A, T10340, T10414, T40011

• C5215 covers engine setting/locking and timing chain replacement for 1.2TSi single camshaft 4 cylinder engines and 1.4 & 1.6 MPi/TSi twin camshaft 4 cylinder engines fitted in Audi, Volkswagen, Seat and Skoda models.

• Citroën, Peugeot, Toyota, Vauxhall/Opel
• Citroën: Berlingo III, Berlingo IV, C-Elysee, C1 II, C3 Aircross, C3 III / C3 Picasso, C3 IV, C4 Cactus, C4 II, C4 Picasso/Grand Picasso, C4 Space Tourer/Grand Space Tourer, C5 Aircross, DS3 / DS3 Cabrio, DS4, Peugeot: 108, 2008, 208, 3008, 301, 308, 5008, 508, Partner III, Partner IV, Rifter, Toyota: Aygo, Vauxhall/Opel: Combo-E Crossland X, Grandland X
• EB0 (ZMZ), EB0F (ZMZ), 1PP (HM01), B12XHT, D12XHL, D12XHT, EB2 (HMT), EB2 (HMW), EB2 (HMZ), EB2ADT, EB2ADT (HNP), EB2ADT (HNP) / LES / D12XHT, EB2ADT / LES, EB2ADTD, EB2ADTD (HNK), EB2ADTS, EB2ADTS (HNS), EB2ADTS (HNS) / LES / D12, EB2ADTS (HNS) / LES / D12XHT, EB2ADTS / LEG, EB2ADTX, EB2ADTX (HNN) EB2D (HMU), EB2DT (HNV), EB2DT (HNX), EB2DT (HNZ), EB2DT / LES, EB2DTM (HNV), EB2DTS (HNW), EB2DTS (HNY), EB2DTS / LEG, EB2DTS / LES / B12XHT, EB2DTSD (HNX), EB2DTSM (HNW), EB2F (HMT), EB2F (HMX), EB2F (HMZ), EB2F / LEZ, EB2FA (HMR), EB2FA / LEZ, EB2FAD (HMH) ,EB2FAD (HMM), EB2FB (HMP), EB2FD (HMU) EB2M (HMV), EB2M (HMY), HN02
• Equivalent to OE Reference: 0109-2A, 0109-2B, 0109-6, 16 431 900 80, EN-52127-1, EN-52127-2, EN-52809, G-0109-6

• AST5148A contains the setting / locking tools required for engine valve timing applications on all 1.0 & 1.2 'EB' series belt-in-oil (commonly referred to as 'wet belt') petrol engines fitted in models across the Citroën-Peugeot range as well as shared platform models in the Opel/Vauxhall and Toyota ranges.

• Monitors car battery voltage and parasitic current draw for accurate diagnostics.
• Connects via 16-pin OBDII connector to supply 12V power and prevent data loss during battery replacement.
• Graphing mode displays voltage and amperage as a waveform, allowing in-depth electrical system analysis.
• Rechargeable high-capacity lithium-ion battery with USB-C charging and multi-color TFT display.
• Adjustable current output alarm and auto power-off settings to protect the vehicle’s electrical system.
• View and record real-time data via Bluetooth on the Power Probe Link app for enhanced performance tracking.

• Voltage Monitoring Monitors car battery voltage (0-30V)
• Current Monitoring Detects leakage current with a resolution of 1mA
• Smart Output: Outputs 12V at up to 10A for backup power supply during battery replacement
• Bluetooth Connectivity Bluetooth 5.0 for remote monitoring via PowerProbe Link App
• Display: 2.8-inch TFT color screen with graphical and numerical modes
• Graphical Mode: Displays 20-second voltage and current history as waveforms
• Safety Features: Includes overvoltage (above 30V), overcurrent (above 10A), and temperature protection
• Power Source: Built-in 14.4V, 3000mAh lithium battery
• Charging Interface: USB Type-C, supports PD fast charging
• System Settings: Configurable auto power-off time and current alarm thresholds
• Certifications: FCC, CE, ETL-us, UKCA, EAC
• Interface: Standard OBDII input/output interface
• Durability: Designed for automotive environments.

• Ability to measure in multiple units creates more versatile tool
• High torque accuracy allows for high degree of precision in working conditions
• High angle accuracy allows for high degree of precision in working conditions
• Enhances Torque & Angle Accuracy in Low Lit Areas
• Allows for quick and easy changes between different commonly used angles
• Measures Ft-lbs, in-lbs, Degrees, N-m, kg-cm
• Torque Accuracy CW: +/- 2% - CCW +/-3%
• Angle Accuracy +/- 2° For 90° Rotation
• 12 LED Indicator

• Torque Accuracy CW: +/- 2% - CCW +/-3%
• 5.0 to 99.5LBF.FT
• 6.77 to 134Nm

• 3/8in. T-handle Wrench (200 mm), 3/8in. Extension Bars (125 mm), 3/8in. Ratchet Wrench (200 mm)
• 3/8” Hex Sockets – 8, 10, 12, 13, 14, 17, 19 & 22 mm
• Combination Pliers (180 mm), Electricians Scissors (160 mm), Cable Knife - Changeable (48 x185 mm) & Spare Blade
• Set Content: Diagonal Cutter (160 mm), Snipe Nose Pliers (200 mm), Wire Stripper (160 mm),
• Packed in blow case and EVA foam
• Each tool is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Also suitable for electricians and carpenters (1000V AC safe live working).
• Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working).
• Manufactured from hardened and tempered Chrome vanadium steel.

• This set also includes claw, clamp and spacers for dummy profiling which is suitable for Car, Van, Truck, Bus, Agricultural & Marine injector sizes (suitable for use where injector is held in place by clamp / claw / bridge. Collar system allows easy match
• This set could cover most modern car, van, truck, bus, agricultural and marine engines.
• Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors.

General Information

Engine Timing Tool Kit - VAG TFSI/FSI Engine Timing Tool Kit - VAG TFSI/FSI.

• Made in Sheffield
• OEM Cross reference and instructions provided
• Upgraded version of existing kit 5021
• Also 1.4 TSi and 1.2TFSi/FSi engines
• Applications: 1.4/1.6FSi

• Signal Locking will show the correct direction to a short to ground
• Signal distance bar indicates distance height from short to ground or open circuits
• LED light on receiver illuminates the work space area
• Longer 10-minute Auto shut off time

• Operating Voltage (Transmitter): 6V-48V DC
• Current Consumption (Transmitter): <200mA
• Operating Voltage (Receiver): 2 AAA batteries
• Signal Frequency: 4kHz polarized signal
• Circuit Testing Modes: Open circuit tracking
• short circuit tracking
• ground circuit tracking
• Operating Temperature: Up to 50°C
• Storage Temperature: Up to 70°C
• Maximum Humidity: 80% non-condensing
• Altitude Limit: <2000m
• Signal Detection: Indicates short and open circuits using visual and audio cues
• Sensitivity Adjustment: Adjustable for varying signal strengths
• Auto Shutoff: Receiver turns off after 10 minutes of inactivity
• Accessories Compatibility: Standard 4mm banana jack connectors for custom adapters
• Cable Length: 6m transmitter power cable for extended reach.

• Tests Bad Grounds and Short Circuits
• Supplies Power and Ground
• Digital Voltmeter with Min/Max Voltage Capturing
• Navigation Menu for EZ Learning

• Voltage Detection Range: Supports low and high AC voltage detection
• LED Indicators: Visual indication of circuit status and voltage presence
• Non-Contact Operation: Safely detects voltage without direct contact
• Frequency Compatibility: Operates effectively at standard electrical frequencies
• Durability: Designed for robust field use with protective casing
• Ease of Use: Features ergonomic design and intuitive operation
• Compliance: Adheres to international electrical safety standards
• Battery Operated: Uses standard alkaline batteries for portability.

• M1CA, M1CB, M1DA, M1DC, M1DD, M1DH, M1FA, M1JA, M1JC, M1JE, M1JH, M1JJ, M1JL, M1JM, M1JP, M1JU, M2DA, M2DB, M2DC, M2GA, M2GB, P4JA, P4JB, P4JC, P4JD, SFCA, SFCB, SFCC, SFCD, SFCE, SFCF, SFDB, SFJA, SFJB, SFJC, SFJD, SFJE, SFJH, SFJJ, SFJK, SFJL, SFJP, XMJA, XMJB, XMJC, XMJD, YYJA, YYJB, YYJC, YYJD, YYJE, YYJF, YYJG, XPJA, XPJB, XPJC, XPJD, XYJA, XYJB, XYJC, XYJD, XYJE
• C5265  Engine Setting & Locking Kit is an alternative to the larger CBIOSTPET Kit and is used on Belt-in-Oil engines, commonly referred to as 'wet belt' engines,  installed in 1.0 EcoBoost 3 Cylinder and 1.1 Ford models, and contains the essential tools required for Belt Removal/Installation and Valve Timing Check.
• Ford
• B-MAX, C-MAX ('11), C-MAX ('15), EcoSport, Fiesta ('13), Fiesta Active ('18), Focus ('11), Focus ('15), Focus ('19), Grand C-MAX ('11), Grand C-MAX ('15), Grand Tourneo Connect ('14), Mondeo ('15), Tourneo Connect ('14), Tourneo Courier (14), Transit Connect ('14), Transit Courier ('14)
• Equivalent to OE reference: 303-1605, 303-1604, 303-732, 303-1602

• M9R- 610/613/615/630/692/700/780/782/784/786/788/721/722/724/740/742/744/750/760/761/762/763/805/808/812/814/815/816/800/802/820/824/830/832/833/834/835/836/838/845/849/855/856/858/859 M9T - 670/672/676/678/680/686/690/692/694/696/698/700/702/706/870/880/708/870/880/890/896/898/L2U/YS23DDT
• Diesel 2.0 / 2.3 dCi / CDTi / M9R / M9T (Chain) Engine Setting / Locking Kit - Nissan - Renault - Opel/Vauxhall
• Nissan, Renault, Vauxhall/Opel
• Nissan: NP300 Navara (D23)(15-), Primastar (X83), Qashqai/Qashqai+2 (J10), X-Trail (T31) (07-14) Renault: Espace/Grand Espace IV (J81)(02-15), Koleos (H45), Laguna II (B/K74)(01-07), Laguna III (B/D/K91)(07-15), Latitude (L43) Master III (E/F/H/J/U62)(10-), Megane II (B/C/E/G/K/L/S84)(02-10), Megane III (B/D/E/K95)(08-), Scenic/Grand Scenic II (J84)(03-09) Scenic/Grand Scenic III (J95)(09-), Trafic II (E/F/J83)(01-14), Vel Satis (B73), Vauxhall/Opel: Movano-B, Vivaro-A

• 116i (E81/82/87/88)(04-14), 118i (E81/82/87/88)(04-14), 120i (E81/82/87/88)(04-14), 316i (E90/91/92/93)(05-14), 318i (E90/91/92/93)(05-14), 520i (E60/61(03-10)
• BMW
• Equivalent to OE Reference: 11-8-700, 11.5.120, 11.8.690, 11.8.710, 11.9.340
• N43 B16A/AA, N43 B16AA, N43 B16AA/O0, N43 B20A, N43 B20A/AA, N43 B20AA, N43 B20AY, N43 B20K0, N43 B20U0

• C5120A includes the tools required for cylinder head removal & installation, cylinder head gasket replacement, camshaft replacement and camshaft timing chain replacement, as well as adjustment and replacement of balance shaft and oil pump.

• Power Probe OBD II Breakout Testing Box
• Tests DLC (OBD port) for any abnormalities, such as shorting or reverse polarity at the pins before connecting other diagnostic equipment.
• quickly accss all 16 pins connections during repair and diagnosois of the vehicle

• Voltage Monitoring Range: 7.0V to 30.0V DC input
• Maximum Load: Up to 3.0A output
• Overload Protection: PTC self-healing fuse
• LED Displays: 3-digit resolution of 0.1V
• Banana Sockets: 16 outputs with 1.0mm diameter and LED indicators
• Protocols Detected: PWM (J1850)
• VPW (J1850)
• ISO 9141-2
• DIS/ISO 14230-4
• CAN bus (J-2284)
• Temperature Range: Suitable for automotive environments
• Humidity Tolerance: Less than 70%
• Cable Length: 30 inches (0.8 meters)
• Polarity Protection: Detects reverse polarity with red LED for pins 4 and 5
• Voltage Alerts: Slow beeps for low voltage (<11.8V for 12V systems)
• fast beeps for high voltage (>15.5V for 12V systems)
• Diagnostic Features: Monitors individual pins for voltage presence
• detects communication protocol signals
• DLC Connector Flashlight: Built-in light for easier connection
• Battery Type for Flashlight: CR1220 coin battery.

• 1/2in. Insulated T-handle Wrench 200 mm
• 1/2in. Ratchet Wrench 250 mm
• 1/2in. Extension Bar – 125 mm & 250 mm
• 1/2in. Bits Socket (120mm) – 4, 5, 6, 8 & 10 mm
• 1/2“ Hex Socket (55mm) – 10, 11, 12, 13, 14, 17, 19, 22, 24, 27 & 32 mm
• Packed in blow case and EVA foam
• Each tool is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Suitable for electricians(1000V AC safe live working).
• Manufactured from hardened and tempered Chrome vanadium steel.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• 1x Gates Mounting Tools, timing belt (GAT4776)
• 1x Gates Mounting Tools, timing belt (GAT4528)

• Fluids sold seperately J02230
• Added value to servicing & MOT work
• Thorough 2-stage solution
• Process complete in just over 1-hour
• Professional system for DPF cleaning
• High-quality long-lasting construction

• Backlit LCD screen
• Available in 19 self-selectable languages
• Operating Voltage - 12V
• Test Time - 30 seconds
• Max Temperature - 320°C
• Brake Fluid Compatibility - DOT3, DOT4, DOT4+, DOT5.1
• Accurate, reliable and repeatable results

• UKCA/CE/EMC approved/RoHS compliant

• Citroën, Mini, Peugeot
• Citroën: Berlingo III, C3 III, C3 Picasso, C4 / C4 II, C4 Picasso/Grand Picasso II, C5 III, DS3/DS3 Cabrio, DS4, DS5, Mini: Clubman (R55) (07-14), Clubvan (R55) (12-14), Countryman (R60) (10-17), Coupe (R58) (11-15), Mini (R56/57) (06-15), Paceman (R61) (13-17) Roadster (R59) (12-15), Peugeot: 2008, 207, 207 cc, 208, 3008, 308, 308 (13-), 308 cc, 5008, 508, Partner III, RCZ
• Equivalent to OE Reference: 0197-A1, 0197-A2, 0197-A3, 0197-B, 0197-M, 11.9.340, 11.9.540, 11.9.550, 11.9.590
• N12, N12 B14, N12 B14AB, EP3 ( 8FN/8FS), EP3C (8FN/8FP/8FR), N14, N14 B16A, N14 B16CD, N14 B16TO, N12 B16A, N16, N16 B16A, N16 B16A.MO. N16 B16K0, N16 B16M0, N16 B16U0, EP6CDT, EP6CDT (5FA/5FE/5FM/5FN/5FV), EP6CDTE (5FR), EP6CDTM (5GY/5FM) EP6DT, EP6DT (5FT/5FX), EP6DTS (5FD/5FF), EP6FDT (5GW/5GZ), EP6FDTM (5GY), EP6, EP6 (5FP/5FS/5FW), EP6C, EP6C (5FK/5FS), EP6CB (5FK)

• C5020 contains the required tooling to cover engine timing checking and adjustment applications on the complete range of N12/N14/EP3/ EP3C/EP6/EP6C/EP6DT/DTS/CDT engines in BMW Mini and PSA models detailed.