Workshop Tools

• Self calibrating
• Auto power off
• Measures tyre tread depth in mm / inch
• Measures pressure in psi / bar / kPa / kgf/cm²

• Tyre Pressure Accuracy: +/- 1.5 % Reading Resolution: 0.1 psi / 0.01 bar / 1 kPa / 0.01 kg/cm² Calibration: 2-100 psi / 0.15-7 bar / 15-700 kPa Tyre Tread Depth Accuracy: +/- 0.2 mm Reading Resolution: 0.01 mm / 0.001 in Calibration: 0-15 mm

• The unique single pawl design prevents the Gear from slipping during high-speed turning.
• The ratchet gear mechanism head is and designed with High-grade Cr-MO material, providing extra strength and durability.
• The tool has a Super Rust-Resistant finishing, proven through a Salt Spray Test that lasted over 72 hours.
• The handle features a unique ergonomic design made of two components for enhanced comfort.
• The 120-Tooth reversible ratcheting mechanism allows for a minimal sweep of 3 degrees, enabling usage in tight spots.
• The Heavy Duty New Index Flex head mechanism offers the option to fix the head or use it in a flexed position.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 180° flex design for improved leverage.
• CR-V material for strength and durability.
• Full chrome polish for corrosion resistance
• Comfort grip handle for less user fatigue.

• Breaker Bar / Socket Carlyle Hand Tools

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

General Information

Tensioner Wrench - VAG Tensioner Wrench - VAG.

• Multi purpose tensioner
• Five adjustable positions for use on many Volkswagen Audi Group models
• The tool is designed to offer further access where access is restricted
• 4mm Hex Key required to adjust the positioning
• 18mm pin centres/3mm pins

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet ANSI, DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• 180 degrees flex head & extra long beam offers extreme reach and loads of leverage.
• Ratcheting box ends are designed to accommodate a variety of fasteners including both 6-and 12-point nuts.
• Reversible wrenches feature an easy-to-use reversing mechanism
• Wrenches feature a sleek, offset-head design for tight access points, slim dimensions for confined areas.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Foldable
• Black and Silver finish
• Side wire cutter for wire twisting applications

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

General Information

Insulated Safety Clamp 1000v

• Weight 52 grams
• Rubber contacts in the jaw protect the insulating shroud
• Jaw opening 45mm
• For use with insulated shrouding to hold the shroud in situ
• Dimensions: Length 140mm

General Information

Camshaft Locking Tool - Seat. Camshaft Locking Tool - Seat

• An additional knob/handle is incorporated in the tool to assist with precision alignment
• The Camshaft setting bracket can be offered to the camshaft slot by sliding it along the dowel screws
• This time saving product from Laser means essential timing adjustment can take place with the Vacuum Pump and Cam cover still in place
• This revised Camshaft Setting Bracket for VWs now gives even better alignment with 2 ground shoulder screws included in the set

• 7/8in. maximum jaw opening width
• 4 position adjustable jaw

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Set of 2 spring pressure regulator compressors.
• Perfect for limited space jobs.
• Drop forged Chrome-Vanadium steel.
• Anti rust coating.
• Maximum jaw opening is 370 mm.

• NCCJ10B-P - Hydraulic Pump Replacement
• NCCJ10B-H - Handle Replacement

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• High quality hot-forging process provides a performance exceeding ASME standard
• Ultra thick 6 points open end provides durable performance
• High visibility colour filled size mark for easy identification during use
• ASME Compliant
• Premium Chrome Finish
• 15 degree offset dual open end

• ASME Compliant

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Blade: 310 x 250mm
• Size: No 2
• Solid forged blade and socket correctly tempered for strength
• Metal YD handle with wooden cross piece
• A heavy-duty all steel square mouth contractors shovel

General Information

Engine Timing Tool Kit - for Ford Duratorq Diesel

• 2.4 Tdi Transit (00-08)
• Plus 2.0 TDCi Tdi Transit (00-08)
• Also 2.0 TDCi Mondeo chain engine, 2.2 TDCi Mondeo (04-07)
• For 1.4 TDCi Fiesta and Fusion 2002-2009)
• A special 4 piece kit containing the necessary special pins for 2.0 and 2.4 litre chain driven engines
• Allows removal and replacement of timing belts/chains on the Ford Duratorq engines

• Stainless steel needle and nozzle
• Pressure trigger and air control screw
• Cup Capacity: 600ml
• Air Consumption: 15 CFM
• Air pressure: 3 BAR / 50PSI

• Thin wall design with chamfered openings for easier mating to fasteners
• Offers Z-Drive, contacting the flat walls of fasteners for stronger grip
• Centre hole is punched through for extra depth on the work surface
• Features two grease rings for superior user grip
• All PCL sockets exceed ANSI specifications
• Storage case complete with individual labelled moulds for each socket size
• 3 alloy wheel sockets to cover the most popular sizes for a 1/2in. impact wrench
• Impact rated 6 point chrome molybdenum sockets