Workshop Tools

• Position Locking Pin
• Flat Top Rubber Saddle for Smooth Engagement
• Circular Base Pads for Added Stability
• Heavy Duty Steel Base
• Sold in Pairs

• UKCA /CE

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

General Information

Steering Wheel Lockout Cover 500mm

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Easy to use, the device is handheld and the flare type is marked on the cast body. A pipe stopplug is provided and the brake pipe is inserted until it can go no further; this sets the correct length of pipe presented to the punch and ensures a perfectly
• The set includes dies and punches for the two most common brake pipe sizes: 4.75mm and 3/16″ diameter and can produce SAE double flares.
• Under a wheel arch or even underneath the vehicle, its small size, light weight and robust construction makes flaring brake pipes an easy task even when access is difficult.
• The compact design of this new brake pipe flaring tool means that it is particularly suited to onvehicle use, making it very convenient and a real time saver

• 3 SHOCKWAVE IMPACT DUTY flip nut drivers with 7, 8, 10, 12, 13 and 17mm.
• Designed to hold more nut drivers in one solution.
• Shank and nut drivers compatible with impact drivers.
• Magnetic SHOCKWAVE IMPACT DUTYshank.
• On shank storage for easy access.
• Anti-peel cushion grip provides the best ergonomics.
• Available sizes: 6-in-1, 9-in-1.

• Rust protection: Chrome plated tool increases life by reducing corrosion.
• Lever release design: Traditional release lever for jobsite convenience.
• TORQUE LOCK™: Faster set up and easy release when clamping flat and round materials for welding. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
• Hardened jaws: Better grip force on jobsite material.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• High quality hot-forging process provides a performance exceeding ASME standard
• Longer beam provides more torque during use
• Patented anti-slip open end grasps nut tight, zero chamfer box end offer better bite on worn fasteners
• Premium Chrome Finish
• Anti-Slip open end
• Zero chamfer box end
• 9 to19mm

• ASME Compliant

• NCCJ25F-RW - Rear Wheel Replacement
• NCCJ25F-RP - Rubber Pad Replacement
• NCCJ25F-P - Hydraulic Pump Replacement
• NCCJ25F-H - Handle Replacement
• NCCJ25F-FW - Front Wheel Replacement

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 1 x Universal Joint, 1x Adaptor, 1 x Hex 1/2DR Square , 1 x 150mm extension
• Standard Impact sockets 10,12,13,14,15,17,19,21,22,24mm

• Anti-roll, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Hardened magnetic tips for maximum durability and fastener retention

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Comfort non slip grip provides the user good control when using.
• Push button design allow for quick jaw size changes.
• Professional grade pliers constructed from chrome-moly material
• Comfort non slip handles
• Lifetime Warranty
• Push button design
• Sizes; 170mm - 250mm - 300mm

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• This set of tools enables the correct timing to be made when servicing the Vauxhall/Opel chain engines fitted to Vauxhall Agila and Corsa with 1.0 12v X10XE and 1.2 16v X12XE engines
• Agila, Astra-G/H, Combo-C, Corsa-B/C/D, Meriva-A, Tigra-B
• For 1.0 12v X10XE and 1.2 16v X12XE engines
• With X10XE, Z10XE, Z10 XEP, X12XE, Z12XE, Z12 XEP, Z14XEL, Z14XEA engine codes
• Chain driven engines
• 1993-2010

• Kit includes: 1 x 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm
• Thunderweb metal drill bits have a conical shaped web which gets thicker towards the back of the drill bit making them more durable
• 135 degree point angle with split point for precision drilling
• Supplied in a Packout compatible case

• 4932493869

• Corrosion resistant & non-magnetic
• The double-faced head is a cast barrel shape offering maximum striking surface while enhancing balance
• Shock reducing cushion grips minimize vibration & provide a non-slip grip while maximizing comfort when striking
• Non-Marring: Helps reduce impact and helps reduce work damage where surface protection is critical
• Non-sparking: For safe use near combustible materials

• Laser engraved size ID for quick and easy identification.
• Chrome finish for corrosion and rust protection.
• Durable and compact storage rack to optimize space inside the drawer.
• Precision knurling located on the shaft and female drive end for better control when hand threading.
• Wobble functionality provides additional access in tight spaces and can also be used as a standard extension when fully inserted.
• Sockets - Extension Bars

• NCCJ30LPF-RW - Rear Wheel Replacement
• NCCJ30LPF-RP - Rubber Pad Replacement
• NCCJ30LPF-P - Hydraulic Pump Replacement
• NCCJ30LPF-H - Handle Replacement
• NCCJ30LPF-FW - Front Wheel Replacment
• NCCJ30LPF-FP - Foot Pedal Replacement

• Chrome finish for corrosion and rust protection.
• Durable and compact storage rack to optimize space inside the drawer.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 1975g

• Chrome alloy steel, chrome plated.
• 15° offset box for better accessibility.
• Ink-filled labels for clear visibility.
• Optimised storage: 7 pc set with carry handle, 15 pc set in tray for easy storage and connection to tool roller cabinet drawers.
• Rounded I-Beam handle for comfortable handling grip.

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Flexible material allows for easy install and removal.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Not for use on or near live electrical circuits.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.

• Flexible additional organisation.
• Modular connectivity with PACKOUT™ components: stack on and store in other PACKOUT™ Tool Boxes.
• Includes Quick-Adjust-Dividers for custom storage layouts.
• Part of the PACKOUT™ modular storage system.
• Top carry handle allows easy transport.
• Fits inside of: PACKOUT™ Large Box, PACKOUT™ Trolley Box, PACKOUT™ XL Tool Box, PACKOUT™ Rolling Tool Chest.
• 11 kg weight capacity.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.