Workshop Tools

• The pulley shaft is held in place with the T50 Star bit on 1/2in.D socket whilst the nut is undone using the 33 teeth union nut with 19mm spanner
• Star is the equivalent of Torx - 6 sided Torx is the registered trademark of Acument Intellectual Properties, LLC
• Ideal tool for assembling and dismantling the free wheel pulley whilst charging the alternator or pulley on Bosch alternators

• Made from Chrome Molybdenum
• Due to the nature of this product they are considered consumable and not covered by the Laser guarantee
• An impact adaptor that reduces 1in. drive (F) accessories down to 3/4in. drive (M)

• Pump available separately - Part No. 3813
• Specialist tool
• 10mm diameter connection.
• For the introduction of fuel into the fuel pump after replacement of the fuel filter.
• Suitable for Vauxhall 2.2 Di and 2.0 Di diesel engines with engine codes: X20DTL,X20DTH,X22DTH.
• For introducing fuel into the fuel pump after replacement of the fuel filter.

General Information

Oil Filter Socket 3/8"D - 32mm

• 3/8in.D
• Suitable for Vauxhall/Opel Astra-G, Corsa-B and Zafira
• Manufactured from Chrome Vanadium
• 32mm Face Drive Socket suitable for use on oil filters on Vauxhall/Opel including AstraG CorsaB and Zafira

General Information

Oil Filter Socket 3/8"D - 36mm

• New applications now include: VAG 19 SDi (ASY), Ford and Jaguar 22 D, BMW Mini R56 and Mercedes-Benz 606
• Remove paper filters without damaging the housing
• 36mm face drive x 3/8in.D
• Applications include Vauxhall/Opel 16v (98-) BMW 24v petrol/diesel engines, Mercedes-Benz 116 MB engine Vito Cdi, Ford vehicles with Duratorq diesel engines and the new style Transit Vans
• This Oil Filter Socket has been specially designed in Face Drive to protect the corners of the filter from damage

• High-visibility colour for easy location
• Special jaws will not damage internal hose lining
• Lightweight, non-conductive
• Can be used on brake, vacuum, heater and all other flexi hoses

• Instructions included
• Suitable for all non-toxic fluids and safe and easy to use
• Also suitable for household plumbing systems etc
• Quick and effective for water and other liquids Not suitable for petrol
• 175mm overall length Pipes are 900mm long
• An ideal tool for transferring fluid from one vehicle to another

• Manufactured from Chrome Vanadium
• Can be used with a spanner in confined spaces
• This 2 piece M14 Spline bit set has been specifically introduced to handle the fixings on Ford bellhousings where access is difficult Made from S2 material for strength and 30mm long

• Suitable for Purflux, Grove filters fitted to: Audi, Volkswagen, BMW, Citroën, Peugeot, Ford, Fiat, Lancia, Mazda, Mercedes-Benz, Nissan, Vauxhall/Opel, Porsche, Renault, Suzuki, Toyota
• 1/2in. Drive
• Removes oil filter without damage to the filter housing
• Aluminium Filter Wrench

• Simple and effective.
• One way function only.
• Connect to any length of hose.
• Ideal for cars and boats etc.
• Suitable for priming fluids on diesel engines.
• This pump can be used to prime most diesel fuel pumps including diesel boat engines. Pump from Laser Tools Part No. 3463.

• Time saver
• Easy visibility
• Quality tool
• Master tyre pressure gauge with angled head for easy access and visibility 10-100PSI / 05 - 7BAR

• Essential for routine service on modern vehicles
• The paper filter can then be replaced successfully
• Plus Renault Megane, Laguna 15, 19, 22, 25 DCi engines and Mercedes-Benz
• For Citroën and Peugeot vehicles including Citroën Visa Dti, AX, Saxo, ZX Xantia and Peugeot 205, 306, 309, 405, 406, 806 models
• Removes the outer casing of eco-oil filters without damage

• Socket and installing ring for replacing the suspension joint on Mercedes M Class front and rear suspension
• 3/4in. drive
• Complete with installing ring
• Once the joint is fitted, the installing ring supplied with the socket is removed and the ring supplied with the joint, which has thread lock compound, is fitted to secure the joint permanently

• Simple one way pump action
• Syphons petrol or diesel
• Drains radiators
• Length: 1650mm
• Pipe diameter: 1/4in.

General Information

Timing Pins - Renault engines. Timing Pins - Renault engines

• OEM codes MOT 1489/1054/1430, Mercedes 607 589 01 15 00, 607 589 00 15 00
• For Flywheel locking on Mercedes Benz Citan use Laser 3203 (starter motor removal required)
• Renault engine code K9K (2002-on), Mercedes 607951 (K9K) (2012 on)
• Popular with the Nissan Micra 15 Dci
• Crankshaft and Camshaft timing pin set for Renault 15 and 19 DCi engines fitted to Laguna, Kangoo and Clio models

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors

• These heavy duty CV Boot Clamp Pliers can be used by hand or with the assistance of a power bar and torque wrench if specific torque is required
• PVC dipped handles for comfort
• Suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems

General Information

Tyre Tread Depth Gauge

• Range: 0-25mm
• Simple ON/OFF with 1.5V SR44 battery included
• Metric to Imperial measurements
• Large LCD display

General Information

Timing Tools - Land Rover/Jaguar V6. Timing Tools - Land Rover/Jaguar V6

• Camshaft sprocket timing pins 303-1126
• Camshaft Sprocket aligning tool 303-1132
• Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
• Engine Code 276D T 2004-2007
• Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions

General Information

Flywheel Locking Tool. Flywheel Locking Tool

• Flywheel Locking tool OEM 21-168/303-393
• Flywheel Locking tool adaptor (01) 303-393-02
• Flywheel Locking tool adaptor (01) 303-393-01
• Flywheel locking tool for Ford diesel and petrol engines

General Information

Compression Test Adaptor Compression Test Adaptor.

• Also used on Peugeot 207/307 and Renault 12 16 valve
• BMW, Mini, Mercedes-Benz M156 (AMG engine manufactured from 2006 onwards
• This tool is now essential on BMW E90 335i with N54 engines (2006)
• This extra long Compression Test Adaptor is designed to fit 12mm Spark Plugs

General Information

Timing Tool Set 2.0lt TDi PD - VAG Timing Tool Set 2.0lt TDi PD - VAG.

• Tools also available separately
• Full OEM reference and guidance notes included with each set
• Specifically designed for Belt driven diesel engines
• Timing tool kit for VAG 2.0 litre TDI, PD & DOHC engines fitted to Audi A4, Audi A6, Skoda Octavia II, Volkswagen Golf, Jetta and Touran models

Technical Information

Timing Tool Set - Ford/Volvo. Timing Tool Set - Ford/Volvo

• Camshaft Locking Strap now includes OEM 303-376B
• Made in Sheffield
• Also used on Volvo models with 18/20 CHAIN engines
• Also included in the kit is 303-748 (21-259) for Focus C-Max 16, 14, 16 and Fiesta Fusion 124 & 14
• This new camshaft setting bar updates the existing 3096 and is suitable for all the applications including the latest HWDA, HWDB & HXDA engines

• It has a 14mm Bi-Hex x 65mm 12pt 3/8in. drive and is made from Chrome Vanadium. Also used on other manufacturer's fitted with 8mm Bosch spark plugs such as:
• Renault 1.2 16v
• Peugeot 207 and 307
• Mercedes-Benz M156 engine
• BMW Mini
• BMW E90335I N54 engine 2006
• This specially designed - thin walled Spark Plug Socket with a spring clip to hold the plug is used on most Citroen vehicles

• Deep impact socket
• Manufactured in Chrome Molybdenum for strength
• Suitable for use on Peugeot Ball Joint Sockets

General Information

Engine Timing Tool Kit - Vauxhall/Opel;, Engine Timing Tool Kit - Vauxhall/Opel.;

• Zafira-B 1.6 16v with engines Z16LET & Z16XEP 2003-2007
• Meriva (VXR)
• Astra-H
• Astra-G
• Opel
• Vauxhall
• Camshaft alignment pin (KM 6340) and tensioner locking pin (KM 6333) for:

• Offset drive for easy access
• For use on General Motors models plus Saab 95 TiD (OEM 8 39 5808)
• 3/8in.Drive
• Specially designed for removing the oil filter on GM vehicles with 3 litre DTI engines

General Information

Diesel Injector Seat Cutter Set

• 15mm flat cutter with 19mm external diameter for other makes
• 17mm angles cutter with 21mm external diameter for Fiat, Iveco
• 17mm flat cutter with 17mm external diameter for BMW, PSA, Renault
• The 17mm Flat cutter with 17mm external diameter for BMW/Peugeot/Renault19mm Angled cutter with 21mm external diameter for Fiat/ Iveco
• Set of 4 cutters for re-cutting injector seats when reconditioning diesel engines or replacing the injectors 15mm Flat cutter for universal applications

General Information

Diesel Engine Timing Tool - Fiat 2.3 JTD Diesel Engine Timing Tool - Fiat 2.3 JTD.

• The 23 JTD twin camshaft Common Rail diesel engine is belt driven between crankshaft and inlet camshaft but utilises a chain to connect both camshafts
• The high pressure fuel pump does not require timing
• This kit includes the latest Crankshaft Timing Pin required on engines produced from 2006-2008
• This kit includes the latest crankshaft timing pin
• An engine timing locking tool set for fiat ducato 23 JTD with engine codes: F1AE0481C, F1AE0481D, F1AE0481N 2002 to 2008 and the Fiat 30JTD with engine code F1CE0481D

General Information

Deep Impact Socket 3/4"D 32mm

• Manufactured from Chrome Molybdenum
• Available in range 19mm - 46mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 3/4in. drive