Workshop Tools

• Part of a range of Deep Impact Sockets in 1in. drive
• Deep Impact socket
• Available in range 22mm - 70mm
• Manufactured from Chrome Molybdenum

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

• Manufactured from Chrome Molybdenum
• Volkswagen Audi Group, BMW, Ford, Vauxhall/Opel, Volvo and Rover
• Suitable for Mercedes-Benz (C & E class 602,605,606)
• Specifically for removing and installing deep seated Lambda sensors

General Information

Aluminium Repair System Aluminium Repair System.

• Can be used with standard heat source
• Complete with tinning brush & 5 aluminium rods
• This product will repair any damage to aluminium parts quickly and effectively without using flux or chemicals
• Using a standard heat source these aluminium brazing rods can repair damage to most aluminium parts without using flux or chemicals Brazes all Aluminium Alloys, including Zinc, Magnesium, Pot Metal and Cast Aluminium

General Information

Special Socket 24mm - VAG Special Socket 24mm - VAG.

• Chrome Molybdenum
• Introduced primarily for removing the drive axles
• Special socket
• This Bi-Hex Socket has been introduced primarily for removing the drive axle screw on Volkswagen Touran ( 06-) and Passat

• Spring loaded trigger
• Nickel plated nozzle
• Use with air compressor
• Quick removal of dust and particles
• 100mm (4in.) lance

• Full instructions are included
• The tool works with an air compressor at 4-7 BAR and on a maximum diameter of 110mm
• This CV Bootgun is designed for stretching flexible CV Boots on to the drive shaft assemblies of automotive vehicles

• 4821A - Water Pump Pliers - 16in.
• 4820A - Water Pump Pliers - 10in.
• 4819 - Side Cutters - 6in.
• 4817 - Long Nose Pliers - 6in.
• A new range of chromed nickel steel pliers with serrated jaws - spring loaded and covered by TUV/GS certificates.

General Information

Washer Jet Tool (CD) Washer Jet Tool (CD).

• Other end gives a firmer tool for redirecting onto the windscreen
• One screw end reveals fine pin point for cleaning out
• Knurled body gives added grip, complete with a pocket clip
• Suitable for cleaning out blocked washer jets and redirecting
• Double ended washer jet tool

General Information

Manual Pressure Brake Bleeder 2L

• Designed to use with most brake master cylinder reservoirs measuring 1in. to 3in.
• Is supplied along with a European adaptor
• 2 litre container supplied with European adaptor
• Easy to use and designed for single handed operation
• Manual brake bleeder

• Designed to reduce the risk of damaging the motorcycle wheel rims when fitting or removing tyres
• Set of two
• Soft material will not damage the rims
• String line attachment for easy removal

General Information

Wire Brush 4 Row

• The brush conforms to PAHS standards
• 4 row brush
• Carbon steel wire and a soft grip handle

General Information

Oil Filter Wrench - 64.5mm x 14 Flutes x 3/8"D

• 3/8in.D
• Removes filters without damage to the filter housing
• Oil Filter wrench size: 645mm x 14 flutes
• An aluminium Oil Filter Wrench specifically designed for use on Toyota (07-08) 35L V6 and Lexus GS300 (06-) IS250(2006-) IS350(2006-) ES350(2007-) GS350(2007-) GS450H(2007-) LS460(2007-) RX350(2007-) LS600H(2008-)

• Suitable for modern cars
• The belt can then be rotated onto the pulley without twisting the belt
• Time saving
• This tool has been designed specifically for use on the new Stretchy Belt fitted to some of the latest models

General Information

Tyre Pressure & Depth Gauge

• CE certificated and ROHS compliant.
• Integral tyre tread depth gauge.
• Ranges from 3 - 99 PSI with auto power off function.
• A tyre pressure gauge with PSI, BAR, KPA, KG-cm options.
• Two in one essential tools for the Motorist.

• Simply remove 1/2in.D adaptor to reveal 3/8in.D
• Legs manufactured from hardened Chrome Steel (Inside measurement 28mm)
• Can also be tightened using a 21mm socket or spanner
• Removes and tightens oil filters ranging from 635mm to 101mm and driven by 3/8in. or 1/2in. drive accessories

General Information

Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan Timing Tool Kit - fits Renault 1.6/2.0/2.3 DCI/ Nissan.

• OEM Codes: EN48334, EN48332, EN48331, EN48330 Made in Sheffield
• Supplied in metal storage case
• Two crankshaft locking pins are now included to cover for the 16 DCi (Comp G) and 20, 23 DCi (Comp F) Component G - Crankshaft Locking Pin has been added for later M9T 20 and R9M 16 DCi engines
• Timing tool kit for Renault 20DCI chain drive diesel engines fitted to the Megane/ Vel Satis/Espace/Scenic/Trafic/Laguna/Koleos also fitted to the Nissan Qashqai and the Vauxhall/Opel Vivaro Packed in a metal case for storage Application list and OEM

• Motorcycle fork oil level adjuster
• Syringed hollow filler
• Aluminium level adjuster
• A quick and accurate way of setting and adjusting fork oil levels
• Quick and accurate
• Time saver

General Information

Side Lever Barrel Pump Side Lever Barrel Pump.

• Pumps most non-corrosive fluids
• Multi-use tool
• Barrel not included
• For pumping non corrosive liquids from 205 litre drums

General Information

Telescopic Stainless Steel Mirror 6.3 X 4.5cm Telescopic Stainless Steel Mirror 6.3 X 4.5cm.

• Angled for increased applications
• Soft Grip handle
• Extends from 228mm to 717mm
• Unbreakable mirror

• Measures 63mm x 45mm

• Impact quality
• Correctly hardened
• Manufactured from Chrome Molybdenum
• This M18 Spline Bit is essential for use on rear hubs on Volkswagen Golf/Jetta and other Mk IV chassis models

General Information

Hex Bit Set 7mm - 2pc. Hex Bit Set 7mm - 2pc

• 65mm and 92mm long
• Applications for: BMW3/5 with E36 chassis| Ford Mondeo, Fiesta, Alfa Romeo, Vauxhall, Volkswagen, SAAB, Chrysler, BMW Mini etc
• Essential brake service tool
• Two lengths of 7mm Hex Key in 3/8in. drive format for use on brake calipers on BMW 3 Series with E36 chassis

• Includes 1.6mm graduation for minimum tyre depth
• 1mm to 22mm
• Chrome plated finish
• 6 sizes calibrated
• Brass construction

General Information

Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD. Timing Tool Kit - Fiat/Alfa Romeo/Saab/GM JTD

• 14 Buffing mops
• Supplied in metal case with EVA foam
• Essential tool
• Made in Sheffield
• Fits a wide range of models
• For use on Fiat | Alfa JTD multijet diesel engines 1.6 | 1.9 | 2.4 SOHC | DOHC

General Information

Engine Timing Tool Kit - BMW.;,,**,/ Engine Timing Tool Kit - BMW;,..*,*.

• Made in Sheffield
• Essential tool kit
• Pump Pulley Removal Tool included. Manufactured from selected steel
• Applications include BMW 2.0 N47 | N47S (2007-2010)

General Information

Timing Tool Kit - Land-Rover/Ford/PSA/Jaguar. Timing Tool Kit - Land-Rover/Ford/PSA/Jaguar

• Peugeot Boxer and 807 2.2 Hdi 05 onwards
• OEM cross reference and instructions included
• Applications Ford S-Max/Galaxy 2.0 and 2.2 TDCi 2006 onwards and Rover Freelander II TD4 2.2 Duratorq TDCi 06 onwards
• Specific kit supplied for Ford, Land Rover, PSA and Volvo 2.0, 2.2 DOHC common rail diesel engines

• Made in Sheffield.
• Essential tool.
• Selected steel.
• Suitable for use on 1 Series E81,82,87,88, 3 Series E90,91,92,93 & 5 Series E60,61,X3 E83 X1.
• Equivalent to OEM Ref 11 8 740.

General Information

Butane Heating Torch. Butane Heating Torch

• Accepts standard self sealing threaded butane gas cartridges (not included)
• CE approved
• For heating and soldering. Ideal for use with Laser Part No 4707 Aluminium Repair System
• Piezo electric ignition
• Adjustable burner with maximum of 1300C
• A robust butane heating torch with a temperature of 1300C burner

• Part of the Laser Truck range
• Black phosphate finish, heavy duty construction
• 65mm
• OEM 03.364.20.03.0
• For 6 to 9 tonne conventional and Eco axles (type H/K/N)