Workshop Tools

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

General Information

Cable End Shroud with Grip Collar - 35mm. Cable End Shroud with Grip Collar - 35mm

• 35mm diameter x 130mm length
• Also available: 15mm x 100mm length and 25mm x 110mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Comes complete with a handy storage case
• Range 0-99 psi / 0-7 bar
• Measures in PSI, bar, kpa, Kg/Cm2
• Tread depth gauge to measure tyre tread depth
• Unique 360 degree rotating nozzle and LED light to assist in locating tyre valve

• Dimensions (MM): H 141 x W 40 x D 29
• Weight (kg): 0.094
• Batteries: 2x CR2032 Included

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Magnetic holding prevents wear down and enables secure hold.

• QUAD EDGE Tip: unique combination of 135dgsplit point and four cutting edges: 135dgsplit point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel.
• Metal drill bits ground from solid extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
• 3-flat shank from 5 mm for better grip and prevents chuck slippage.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Colour: bronze.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Instantly FLARESAFE; use at any angle
• Solid brass construction
• A durable high power, high temperature (up to 1480 C) fine flame gas torch

• Conforms to BS:EN521

• Teardrop slim ratchet type
• 6 Deg. / 60 Teeth Swing Arc Ratchet
• Polished Chrome

The Maypole Single Barrel Foot Pump is just one of the options from their range of portable foot pumps. It has superior performance up to 100psi, comes with an analogue readout which measures in both PSI and BAR and all the connectors and adapters that you will need to inflate not only your tyres but also a wide range of other inflatables including sports equipment, balls and toys. The pump is quick and easy to use, is compact for easy storage and comes with an ergonomic rubberised tread plate.

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrappers, Maypole has tried to cater for the Travel and leisure markets in the UK.

• Non slip footplate
• Locks down for easy storage
• Locking valve connector
• Supplied with 3 additional nozzle adaptors
• TUV/GS approved
• Heavy duty single footpump

• SHOCK ZONE reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
• SHOCK ZONE Geometry designed to flex:
• Designed for use with impact drivers the SHOCKWAVE IMPACT DUTY accessory line is not only ideal for heavy duty impact applications but also delivers a full system solution for all the user's drilling and fastening needs.
• Custom engineered steel Milwaukee custom metal formula makes the SHOCKWAVE bits more resistant to shock from impacting.
• Laser hardened WEAR GUARD TIP for improved wear resistance and protection of the fit over the life of the bit.

• Pack of 100
• EPDM rubber

• Forged from high quality chrome molybdenum alloy steel
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Includes Plastic Storage Tray
• 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26, 27 mm
• Phosphate

• Rounded Ball-Peen end allows for pounding out round surfaces and peening over bolts
• Hardened steel Ball-Peen hammer head
• Permanent epoxied fiberglass handle provides superior balance and reduced shock and fatigue

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Hook coating protects hooks and stored items.
• High strength steel hooks for storing even heavy tools and items.

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• 1.6 mm illegal tyre tread depth mark
• Accurate measurement of tread 1-26 mm
• DVSA approved for MOT testing
• Self-adjusting friction device
• A positive sealing washer ensures reliability

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy
• 1 psi / 0.1 bar

• SG2 A18 ER70S-6
• Mild steel welding wire for welding low and medium tensile steels

• Sizes: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
• Keys feature long hex arm for access in hard to reach areas. Short hex arm for tight fit access and color coded hex key holder for convenient storage and identification.
• Rugged black phosphate finish for long life and added strength

• Comfort grip l-handles for secure grip & more torque, ball end on long arm for better angle of entry in hard to reach areas & stubby hex shank on side handle for tight fit access

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Hook coating protects hooks and stored items.
• High strength steel hooks for storing even heavy tools and items.

• Built in storage space for hose, power lead & valve adaptors
• Cuts off when selected pressure level is reached
• Ideal for roadside emergencies
• Compact and lightweight, take it anywhere you go
• Comes with a digital display and a 2 piece adaptor kit
• Ideal for inflating tyres and other inflatable objects
• This simple to use air compressor automatically cuts off when the pre selected pressure level is reached

• CE, ROHS, REACH, GS TUV Compliant

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• 180° flex design for improved leverage.
• CR-V material for strength and durability.
• Full chrome polish for corrosion resistance
• Comfort grip handle for less user fatigue.

• Breaker Bar / Socket Carlyle Hand Tools

• L-keys for Torx Screws - T10, T15, T20, T25, T27, T30, T40, T45 & T50
• S2 steel with PP/TPR handle
• ideal for use by mechanics working on electric vehicles
• safe use for live voltages up to 1000V AC/1500 DC

General Information

Glow Plug Socket Set 1/4"D 3pc Glow Plug Socket Set 1/4"D 3pc.

• Sizes: 8mm, 9mm, 10mm
• Features 1/4in. Drive and universal joint
• Manufactured from Chrome Vanadium
• Super slim for improved access in tight areas

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.