Workshop Tools

General Information

Tyre Pressure & Depth Gauge

• CE certificated and ROHS compliant.
• Integral tyre tread depth gauge.
• Ranges from 3 - 99 PSI with auto power off function.
• A tyre pressure gauge with PSI, BAR, KPA, KG-cm options.
• Two in one essential tools for the Motorist.

• 1.6 mm illegal tyre tread depth mark
• Accurate measurement of tread 1-26 mm
• DVSA approved for MOT testing
• Self-adjusting friction device
• A positive sealing washer ensures reliability

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy
• 1 psi / 0.1 bar

• Gas cartridge sold separately
• For use with G2350 or 2175A Go System threaded gas cartridges
• Safety checked and test burned
• Ideal for general DIY, paint stripping, plumbing and intermediate soldering
• Stability base included
• Simple and safe to use
• Auto start Piezo ignition
• Rapid 1 minute warm up, use at any angle with precise flame control
• Stable powerful fine flame (up to 1400 C)

• Conforms to BS:EN521

• Laser edged ruler markings on the blade allows to measure and cut in one go.
• Index finger groove for more comfort.
• Jobsite offset scissors with 60°-offset head allows to keep hand above cutting material.
• Bolt lock technology protects blades from loosening to ensure precise cutting.
• All metal core: Full metal handle construction to protect from drops and handle breakage.
• Iron carbide cutting edge for maximum durability. Longer lifetime vs. stainless steel.
• Large handle loops for use with gloves.
• Chrome plated blades for maximum rust protection.
• Jobsite offset scissors with micro-serrated blades for maximum durability and better grip.

General Information

Socket 46mm 1/2"D Socket 46mm 1/2"D.

• Manufactured from Chrome Molybdenum thin wall reduces the chance of damage to surrounding components
• Air impact quality - Single Hex (6pt)
• Total length 50mm / internal length 25mm
• Single sided rear swinging arm rear wheel and sprocket side nuts
• Equivalent to Triumph OEM T3880046Application: Datona 595 / 955 Speed Triple / Sprint ST 955 / 1050 / Tiger 885i / 955

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish for corrosion and rust protection.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

General Information

Camshaft Drive Tensioner Wrench - for VAG

• Use on the latest range of 1.0L, 1.2L and 1.4L belt driven turbo charged engines
• Applications: Seat Mii/Leon, Skoda Octavia/Citigo, Volkswagen Up!/Golf V11, Audi A1/A3
• For adjusting the Camshaft drive belt tensioner as described by the manufacturer
• Use with Engine Timing Tool Kit - Part No 6230
• Measures 30mm (across the flats)

• Sizes: 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm & 11 mm
• 7 Piece metric nut driver set
• Chrome Vanadium

• Light duty pry bar end
• Alloy scraper
• Robust multi-functional tool
• Hammer, scraper and light duty pry bar end
• Ideal tool for MOT use

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Max 4000 rpm
• Supplied with an adaptor for drill use
• Removes stripes/stickers moulding glue etc
• Fluted abrasive disc

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• QUAD EDGE Tip: unique combination of 135dgsplit point and four cutting edges: 135dgsplit point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm² like stainless steel.
• Metal drill bits ground from solid extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
• 3-flat shank from 5 mm for better grip and prevents chuck slippage.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Colour: bronze.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

The Maypole Single Barrel Foot Pump is just one of the options from their range of portable foot pumps. It has superior performance up to 100psi, comes with an analogue readout which measures in both PSI and BAR and all the connectors and adapters that you will need to inflate not only your tyres but also a wide range of other inflatables including sports equipment, balls and toys. The pump is quick and easy to use, is compact for easy storage and comes with an ergonomic rubberised tread plate.

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrappers, Maypole has tried to cater for the Travel and leisure markets in the UK.

• Non slip footplate
• Locks down for easy storage
• Locking valve connector
• Supplied with 3 additional nozzle adaptors
• TUV/GS approved
• Heavy duty single footpump

• RoHS compliant
• For tracking ignition problems
• Pack of 4
• Designed for testing the output on HT leads

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Integrated wire cutter that can cut up to 1/4in. bolt
• Nickel-plated finish for corrosion resistance
• Durable forged CR-V jaws with induction hardened teeth for ulitimate durability
• Complies with ASME specs B107.24
• Pull-up release allows for one-handed opening when locked
• Tested to exceed 2,500 lbs. jaw pressure
• Hard rubber grip on handle helps prevent hand slippage

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• SHOCK ZONE reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
• SHOCK ZONE Geometry designed to flex:
• Designed for use with impact drivers the SHOCKWAVE IMPACT DUTY accessory line is not only ideal for heavy duty impact applications but also delivers a full system solution for all the user's drilling and fastening needs.
• Custom engineered steel Milwaukee custom metal formula makes the SHOCKWAVE bits more resistant to shock from impacting.
• Laser hardened WEAR GUARD TIP for improved wear resistance and protection of the fit over the life of the bit.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

General Information

Wiper Arm Removal Tool Wiper Arm Removal Tool.

• Screw thread and hook feet
• Sized for difficult access
• Time saver
• Suitable for spline taper and taper spigots

• Qty: 3
• 1/8in. Gas BSP
• High Pressure Rubber
• Popular Line
• Flexi Hose