Workshop Tools

• Positive pressure: 0 ~ 60 PSI Negative pressure. 0~ 30 PSI
• Large easy to read gauge
• light weight aluminium body with simple twist function for choice of pressure or vacuum testing.

General Information

Steering Wheel Lockout Cover 500mm

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• NCCJ25F-RW - Rear Wheel Replacement
• NCCJ25F-RP - Rubber Pad Replacement
• NCCJ25F-P - Hydraulic Pump Replacement
• NCCJ25F-H - Handle Replacement
• NCCJ25F-FW - Front Wheel Replacement

• Easy to use, the device is handheld and the flare type is marked on the cast body. A pipe stopplug is provided and the brake pipe is inserted until it can go no further; this sets the correct length of pipe presented to the punch and ensures a perfectly
• The set includes dies and punches for the two most common brake pipe sizes: 4.75mm and 3/16″ diameter and can produce SAE double flares.
• Under a wheel arch or even underneath the vehicle, its small size, light weight and robust construction makes flaring brake pipes an easy task even when access is difficult.
• The compact design of this new brake pipe flaring tool means that it is particularly suited to onvehicle use, making it very convenient and a real time saver

• Position Locking Pin
• Flat Top Rubber Saddle for Smooth Engagement
• Circular Base Pads for Added Stability
• Heavy Duty Steel Base
• Sold in Pairs

• UKCA /CE

• Corrosion resistant & non-magnetic
• The double-faced head is a cast barrel shape offering maximum striking surface while enhancing balance
• Shock reducing cushion grips minimize vibration & provide a non-slip grip while maximizing comfort when striking
• Non-Marring: Helps reduce impact and helps reduce work damage where surface protection is critical
• Non-sparking: For safe use near combustible materials

• Leak Proof Cylinder
• Welded Carry Handle for Easy Transportation
• Safety Valve to Prevent Overloading
• 60mm Extending Screw
• Adjustable Screw to Change Height
• Welded Base Increasing Stability

• TUV

• Audi, SEAT, Skoda, VW
• Audi: A1/A1 Sportback (8XA/8X1), A3 Cabrio (8P7), A3/A3 Sportback (8PA/8P1), SEAT: Altea/Altea XL (5P1/5P5/5P8), Ibiza (6J1/6J5/6J8), Leon (1P1), Toledo (KG3), Skoda: Fabia II (542/545), Octavia II (1Z3/1Z5), Praktik (5J7), Rapid (NH3), Rapid Spaceback (NH1)(13-) Roomster (5J7), Yeti (5L6/5L7)(13-), Yeti Outdoor (5L7)(13-), Volkswagen: Beetle/Coccinelle/Maggiolino (5C1/5C7), Caddy/Caddy Maxi (2K_/2C_), Golf Plus (521), Golf VI (5K1), Golf VI Cabrio (517), Golf VI Estate (AJ5), Jetta (162), Jetta (163)(14-), Polo (6R1), Touran (1T1/1T2/1T3)
• CBZA, CBZB, CBZC
• Equivalent to OE Reference: T10340, T10414

• C5115 contains the required tools for setting and locking the engine during valve timing check and timing chain replacement. These four cylinder engines have a single camshaft, with two valves per cylinder. A timing chain is used to connect drive between the crankshaft and camshaft.

• Citroen, Fiat, Iveco, Peugeot
• Citroën: Relay / Jumper III, Fiat: Ducato, Iveco: Daily (00-), Daily/EcoDaily (09-11), Peugeot: Boxer III
• Equivalent to OE Reference: 0191/2.A, 0191/2.B, 1.860.617.000, 2.000.018.200, 99360614, 99360615, A60617
• F1AE0481A, F1AE0481B, F1AE0481D, F1AE0481F, F1AE0481FA, F1AE0481FB, F1AE0481G, F1AE0481GA, F1AE0481GB, F1AE0481H, F1AE0481HA, F1AE0481HB, F1AE0481R, F1AE0481RA, F1AE0481UA, F1AE0481UB, F1AE0481VA, F1AE0481VB, F1AE0482RA, F1AE0483FB F1AE0484GB, F1AE3481A, F1AE3481B, F1AE3481C, F1AE3481D, F1AE3481E, F1AE3481G, F1AFL411A, F1AFL411B, F1AFL411C, F1AGL4111, F1AGL4112, F1AGL4113, F1AGL4114, F1AGL4115, F1AGL411A, F1AGL411B, F1AGL411C, F1AGL411D, F1AGL411M, F1CE0114A F1CE0441A, F1CFA401A, F1CE0441F, F1CE0481A, F1CE0481B, F1CE0481F, F1CE0481FA, F1CE0481FB, F1CE0481H, F1CE0481HA, F1CE0481HB, F1CE3481CC, F1CE3481D, F1CE3481J, F1CE3481K, F1CE3481LC, F1CFL411E, F1CFL411F, F1CFL411G, F1CFL411H, F1CFL411J F30DTE (F1CE)

• C4925 contains the tools required for setting and locking the engine as part of the timing belt/timing chain replacement

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• SG2 A18 ER70S-6
• Mild steel welding wire for welding low and medium tensile steels

• ADJUSTABLE DUTY CYCLE from 5% to 100% with side buttons
• COMPATABLE WITH all Power Probe models with a 4mm banana jack in/out
• EASY INSTALL by removing power probe tip and inserting adapter into banana jack
• GREAT FOR diagnosing circuit fan issues

• Voltage Range: Operates between 9V and 24V DC
• Current Capacity: Maximum 40A output
• Frequency Range: Adjustable pulse width modulation (PWM) frequency from 10Hz to 200Hz
• Duty Cycle Range: Adjustable from 0% to 100%
• Input Protection: Overvoltage and reverse polarity protection
• Output Control: Variable output power via rotary dial
• Dimensions: Compact enclosure design for portability
• Connection Interface: Equipped with standard terminals for easy wiring
• Operating Temperature: -20°C to 60°C
• Housing: Durable and lightweight for automotive or workshop use
• Indicators: LED indicators for power status and output activity.

• Open-End Spanners – 8 mm, 10 mm, 12 mm, 13 mm, 14 mm, 17 mm & 19 mm
• Packed in blow case and EVA foam
• Each spanner is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Suitable for electricians(1000V AC safe live working).
• Manufactured from hardened and tempered Chrome vanadium steel.

• Lacquer finish for exceptional rust prevention.
• Hardened jaws for improved strength and durability.
• Most popular sizes allow you to take on any job.
• Professional grade pliers constructed from chrome-moly material
• Comfort non slip handles
• Lifetime Warranty

• Sizes; 125mm 250mm 300mm

• Temperature Range: -10°C to 60°C
• Burst Pressure: 63 bar (3:1 safety factor)
• Working Pressure (1): 300 psi / 21 bar
• Exceeds: BS EN ISO 2398:1997 (BS 5118:1980)
• Conforms to: ISO 5774:2008 (BS 6066:1981)
• Silicone free
• Resistance to oil and fuels
• Good flexibility and kink resistant
• Excellent abrasion resistance

• Conforms to ISO 5774:2008 (BS 6066:1981)
• ExceedsBS EN ISO 2398:1997 (BS 5118:1980)
• Hose Fittings Vertex Coupling & Standard Adaptor
• Working Pressure (Please note - an increase in temperature above 20°C will affect the working pressure quoted above.) 300 psi / 21 bar
• Burst Pressure 63 bar (3:1 safety factor)
• Temperature Range -10°C to 60°C
• Hose Length 10m
• Hose Inside Diameter 10mm / 3/8 in
• Hose Outside Diameter 17mm

• Six point sockets made from chrome vanadium steel that’s hardened and tempered with a satin finish
• Supplied with a 72 tooth reversible soft grip ratchet and accessories
• Packed in a plastic storage case
• Contents: 13 sockets 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
• 8 deep sockets 6, 7, 8, 9, 10, 11, 12, 13mm
• 72 tooth reversible soft grip ratchet with soft grip handle and quick release button
• Spinner handle and Universal joint
• Extension bar 100, 150mm and 1/4in. sq drive to 1/4in. hex bit adaptor
• 3 x plain slot bits 4, 5.5, 8mm as well as 3 x cross slot bits #1, 2, 3
• 6 x hex bits 2, 3, 4, 5, 6, 8mm as well as 8 x Draper TX-STAR bits T8, T10, T15, T20, T25, T27, T30, T40

• Manufactured and tested generally in accordance with DIN3122 and ISO3315 Specifications

• Ford: B-MAX, C-MAX ('07), C-MAX ('11), C-MAX ('15), EcoSport, Fiesta ('04/'08), Fiesta ('13), Focus, Galaxy ('06), Galaxy ('15), Grand C-MAX ('11), Grand C-MAX ('15), Grand Tourneo Connect ('14), KA+ ('16), Kuga ('13), Mondeo ('07), Mondeo ('15), S-MAX ('15), Tourneo Connect ('14), Transit Connect ('14), Volvo: S60 (10-), S80 (06-), V40 (12-), V60, V70 (07-)
• B2KA, YSKD, YSKE, BNMA, BNMB, BNMC, M8DA, M8DB, M8DD, M8DE, M8DF, M8MA, M8MB. M8MC, M8MD, M9DA, M9DB, M9DG, M9DH, M9MA, M9MB, M9MC, M9MD, M9ME, UEJB, UEJE, UNCA, UNCB, UNCC, UNCD, UNCE, UNCF, UNCJ, UNCK, B4164T, B4164T2, B4164T3, B4164T4, HXDA, HXDB, HXJA, HXJB, IQDA, IQDB, IQJA, JQDA, JQDB, JQGA, JQMA, JQMB, JTBA, JTBB, JTDA, JTDB, JTJA, JTJB, JTJC, JTMA, JTWA, JTWB, KGBA, MUDA, MUDD, PNBA, PNDA, PNDD, RHBA, RVJA, SIDA, U5JA, XTDA, XTDB
• Equivalent to OE reference: 303-748, 303-1097, 303-1550
• C5268 contains the tools required for setting and locking the engine when undertaking Timing Belt replacement or checking engine Timing. Suitable for Ford and Volvo 1.2, 1.5 & 1.6 Ti-VCT /SCTi (Sigma)engines.
• Ford, Volvo

• 4 point designed for the removal of rear hub nut on RWD Ford Transit
• Tool designed to align on shaft accurately and lines up with castellated nut.
• Suitable for 2014 onwards

• 1/2 Drive
• OEM 205- 1007
• Shaft Diameter 38mm
• Stud width 6.8mm

• Suitable for oil filters 60mm to 195 mm
• Easy to use due to special chainlock
• Claw prevents slipping
• Handle satin chrome finished
• Chain width approx. 22 mm
• Heavy duty tool with duplex chain

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Chrome Molybdenum Alloy Steel
• Phosphate Outer Finish

• Insulated
• Hardened
• CR-MO
• Combination, Long Nose, Diagonal, Cutting and Wire Stripping
• Comfort non-slip grip

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Cup type design grips like socket thus minimizing the possibillity of crushing filters

• Simple and easy to use, ideal for general low volume tyre inflation
• Has a durable alloy body and Euro style valve connector, and comes complete with operating instructions
• General purpose tyre inflator with an all Alloy body with a rubber protected gauge

• Reading Accuracy: 2 psi / 0.1 bar / 10 kPa Calibration: 10-210 psi / 0.7-15 bar Maximum Inlet Pressure: 15 bar Hose length: 0.85 m Tyre Valve Connection: Euro Clip-on Inlet Thread: G 1/4 l/min

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Deep Metric Socket Set
• 6 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• Personalized Foam Tray
• 90-Degree Tip Angle with 0.090in./2.3 Tip Size, Fits 31 - 82mm Circlip Sizes
• 90-Degree Tip Angle with 0.070in./1.8 Tip Size, Fits 18 - 48mm Circlip Sizes
• 90-Degree Tip Angle with 0.047in./1.2 Tip Size, Fits 12 - 25mm Circlip Sizes
• 90-Degree Tip Angle with 0.038in./1.0 Tip Size, Fits 8 - 18mm Circlip Sizes
• Ergonomic Handle for Added Leverage and Comfort
• Handles Internal and External Circlips
• Heat-Treated for Strength and Durability
• Chrome Molybdenum Steel