Workshop Tools

• All metal design for maximum durabilty.
• FOUR FLAT sides on socket deter rolling.
• 90 tooth design with 4Dg of arc swing for tight work spaces.
• 76 mm extension, 127 mm extension
• Deep well sockets: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm
• Standard sockets: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm

• Signal Locking will show the correct direction to a short to ground
• Signal distance bar indicates distance height from short to ground or open circuits
• LED light on receiver illuminates the work space area
• Longer 10-minute Auto shut off time

• Operating Voltage (Transmitter): 6V-48V DC
• Current Consumption (Transmitter): <200mA
• Operating Voltage (Receiver): 2 AAA batteries
• Signal Frequency: 4kHz polarized signal
• Circuit Testing Modes: Open circuit tracking
• short circuit tracking
• ground circuit tracking
• Operating Temperature: Up to 50°C
• Storage Temperature: Up to 70°C
• Maximum Humidity: 80% non-condensing
• Altitude Limit: <2000m
• Signal Detection: Indicates short and open circuits using visual and audio cues
• Sensitivity Adjustment: Adjustable for varying signal strengths
• Auto Shutoff: Receiver turns off after 10 minutes of inactivity
• Accessories Compatibility: Standard 4mm banana jack connectors for custom adapters
• Cable Length: 6m transmitter power cable for extended reach.

• M1CA, M1CB, M1DA, M1DC, M1DD, M1DH, M1FA, M1JA, M1JC, M1JE, M1JH, M1JJ, M1JL, M1JM, M1JP, M1JU, M2DA, M2DB, M2DC, M2GA, M2GB, P4JA, P4JB, P4JC, P4JD, SFCA, SFCB, SFCC, SFCD, SFCE, SFCF, SFDB, SFJA, SFJB, SFJC, SFJD, SFJE, SFJH, SFJJ, SFJK, SFJL, SFJP, XMJA, XMJB, XMJC, XMJD, YYJA, YYJB, YYJC, YYJD, YYJE, YYJF, YYJG, XPJA, XPJB, XPJC, XPJD, XYJA, XYJB, XYJC, XYJD, XYJE
• C5265  Engine Setting & Locking Kit is an alternative to the larger CBIOSTPET Kit and is used on Belt-in-Oil engines, commonly referred to as 'wet belt' engines,  installed in 1.0 EcoBoost 3 Cylinder and 1.1 Ford models, and contains the essential tools required for Belt Removal/Installation and Valve Timing Check.
• Ford
• B-MAX, C-MAX ('11), C-MAX ('15), EcoSport, Fiesta ('13), Fiesta Active ('18), Focus ('11), Focus ('15), Focus ('19), Grand C-MAX ('11), Grand C-MAX ('15), Grand Tourneo Connect ('14), Mondeo ('15), Tourneo Connect ('14), Tourneo Courier (14), Transit Connect ('14), Transit Courier ('14)
• Equivalent to OE reference: 303-1605, 303-1604, 303-732, 303-1602

• This set also includes claw, clamp and spacers for dummy profiling which is suitable for Car, Van, Truck, Bus, Agricultural & Marine injector sizes (suitable for use where injector is held in place by clamp / claw / bridge. Collar system allows easy match
• This set could cover most modern car, van, truck, bus, agricultural and marine engines.
• Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors.

• Resistances to most common chemicals found in auto shops
• Highly durable and impact resistant design to withstand drops up to 2 m
• Flexible battery system: works with all MILWAUKEE® M12™ batteries
• Dual joints swivel 300° horizontally and 180° vertically to ensure full undercarriage illumination coverage
• Designed for the on-the-go needs of automotive maintenance and service trades
• Magnetic base for mounting applications & 30 cm magnetic storage tray to hold nuts & bolts
• Up to 15 hours of run time on M12™ 4.0 Ah battery pack
• TRUEVIEW™ high definition lighting with up to 1,200 Lumens
• Low battery indicator, light flashes when battery pack is low on charge

General Information

Engine Timing Tool Kit - VAG TFSI/FSI Engine Timing Tool Kit - VAG TFSI/FSI.

• Made in Sheffield
• OEM Cross reference and instructions provided
• Upgraded version of existing kit 5021
• Also 1.4 TSi and 1.2TFSi/FSi engines
• Applications: 1.4/1.6FSi

• Flexible battery system: works with all MILWAUKEE M12 batteries
• Supplied with 1/4in. adaptor
• The LED light illuminates the work area while the on-board fuel gauge displays remaining run time
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Variable speed metal trigger provides ultimate control of the tool
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• REDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• The industry leading FUEL technology combined with a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
• Low profile head design allows users better access in tight spaces
• With up to 75 Nm of max torque and 200 rpm's, this tool is the ideal fastening solution for automotive mechanics, maintenance and repair professionals

• Illuminated LCD display with a digital pressure and fuel gauge that displays remaining charge
• 4 bar memory presets​ and 3 units of measurement
• Top off up to 30 tyres on an M18 5.0 battery pack
• Automatic shut-off at selected bar prevents over inflation
• Auto pressure check feature activates to ensure bar target is achieved
• Supplied with a ball inflation needle presta chuck inflator nozzle and schrader chuck
• Auto shut-off technology inflates to users pre-selected pressure for highly accurate inflation
• 10.3 max bar capacity
• Compact lightweight design for fast inflation of car light truck and compact equipment tyres. Top off 235/65R16 sprinter tyres in under 1 minute
• Flexible battery system: works with all MILWAUKEE M18 batteries
• Anti-vibration stand with all rubber feet for no movement while inflating

• Flexible battery system: works with all MILWAUKEE M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• The LED light illuminates the work area while the on-board fuel gauge displays remaining run time
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Variable speed metal trigger provides ultimate control of the tool
• The industry leading FUEL technology combined with a reinforced mechanism and investment cast steel yoke housing provides greater durability for the professional user
• 19 mm low profile head design and extended neck allow users better access in tight spaces
• With up to 47 Nm of max torque and 450 rpm's, this tool delivers faster application speed and increased productivity for the professional user

• Part of the PACKOUT™ modular storage system.
• Impact resistant polymer construction.
• Metal reinforced frame.
• Each shelf supports up to 22 kg of weight.
• Quick release design for easy mounting, height adjustment and removal of the shelves.
• E-Track mounting rails can be mounted on the wall in vehicles, shops or garages for ultimate versatility.

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Reversible belt hook
• 1/2 square friction ring
• Tri-LEDs deliver high definition lighting to increase workspace visibility
• Auto shut-off control applies no more than 34 Nm of torque for hand-tight fastening applications to prevent over tightening
• Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• Extremely compact design - total length of just 124 mm for access into tight spaces
• Power efficiency under load - outstanding torque of 339 Nm

• No load speed (rpm): 3500 - 8500
• Delivering a performance similar to 1200W corded version
• Milwaukee Model No: M18FSAGV115XPDB-0
• 115 mm keyless guard for great cutting capacity and fast guard adjustment without using a key
• Removable dust screen to prevent debris entrance, prolonging motor life
• Slim handle design
• Integrated FIXTEC system for tool-free wheel change
• Anti-vibration side handle for lower vibration
• Non-lockable safety paddle switch with line-lock-out function to prevent automatic start up
• RAPIDSTOP for fastest disc brake in less than 2 seconds and best user protection
• Maximum control for every application - 5-step speed dial ideal for working with stainless steel and aluminum & for rust and paint removal

• No load speed (rpm): 3500 - 8500

• Flexible battery system: works with all MILWAUKEE M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• LED lights up your work area for better visibility
• Tool-free belt change
• Dual action safety trigger with lock-on function for less strenuous on longer working periods
• 360 degree tool-free head adjustment allows the best handling for each working environment and provides compact storage
• One-hand design allows working in tight areas and ideal for overhead work
• Reverse mode allows the user to choose the belt orientation to manage the direction of sparks/ chips
• 2 speed modes and variable speed trigger provide maximum control from taking down welds to precise work with inox, aluminium and wood
• Outperforms pneumatic competitor while providing better balance
• Lightest cordless band file on the market, only 1.0kg with a 2.0 Ah battery

• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• The highly efficient HEPA filter collects 99.97 % of airborne particles down to 0.3 microns
• Stackable tool box design for added portability and easier storage
• The DEK 26 power tool connector allows for efficient dust extraction from power tools
• On board blower for moving debris away from the work area
• Wall mount hanging plate included for increased storage options
• Internal accessory and hose storage allows all attachments to be carried with the tool avoiding loss of equipment
• Powerful M12 FUEL motor with a maximum air flow of 1275 l/min & 105 mbar provides 18V performance for both wet and dry clean up applications
• With a 6.0 Ah battery the vacuum provides 14 minutes of run time on high and 26 minutes on the low setting this compact vacuum is ideal for spot and service focused wet/ dry quick clean up needs

• AC/DC versatility: Powered by MILWAUKEE® M12™ batteries, or mains plug supply
• Built in charger function for quick and convenient charging of any M12™ battery or electric devices via USB port
• Digital Bluetooth® receiver: Plays music up to 30 m away from your smartphone, computer or tablet
• IP54 in battery mode - making the radio dust and splashing water resistant
• DAB+ and AM/FM tuner with the digital processor delivers highest reception accuracy, signal clarity and additional information like: song, artist and accurate time
• Premium speaker and high frequency tweeter provides high sound quality

• 90 tooth design ratchet with 4°of arc swing for tight work spaces
• FOUR FLAT™ sides on socket for an anti-roll and wrench-ready solution
• Laser cut high quality foam for perfect tool storage
• Fits perfectly into the PACKOUT™Drawer Tool Box

• 1Kit Contents; 28pc socket set, Standard 10-24mm deep 10-19mm, Extension 76mm & 127mm, Ratchet
• Kit Contents; Tri-Lobe screwdriver 4 slot & Ph
• Kit Contents; 250mm Adjustable wrench

• Spindle lock for easy accessory change
• Low weight only 0.36 kg
• LED light illuminates the work piece
• Soft grip and low vibration allows user to work comfortably and for longer periods
• 3.2 mm collet included, compatible with most common accessories
• Variable speed from 5000 rpm to 27,500 rpm with 12 speed settings allows the user to dial in the correct speed for each application
• Compact and balanced in all orientation design allow the user to hold the tool close to the work piece

• Flexible battery system: works with all MILWAUKEE® M12™ batteries
• Sponge interface pad included optimises the tool for profiles and contours which increases the precision and removal of material
• Low vibration at only 4.3 m/s²
• Hook and loop pad allows the user to change quickly between different grit types
• Compact detail sander with a penta shaped pad allows uncompromised corner accessibility
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
• LED lights up your work area for better visibility
• Four speed modes allows the correct speed to be set for different types of material

• Monitors car battery voltage and parasitic current draw for accurate diagnostics.
• Connects via 16-pin OBDII connector to supply 12V power and prevent data loss during battery replacement.
• Graphing mode displays voltage and amperage as a waveform, allowing in-depth electrical system analysis.
• Rechargeable high-capacity lithium-ion battery with USB-C charging and multi-color TFT display.
• Adjustable current output alarm and auto power-off settings to protect the vehicle’s electrical system.
• View and record real-time data via Bluetooth on the Power Probe Link app for enhanced performance tracking.

• Voltage Monitoring Monitors car battery voltage (0-30V)
• Current Monitoring Detects leakage current with a resolution of 1mA
• Smart Output: Outputs 12V at up to 10A for backup power supply during battery replacement
• Bluetooth Connectivity Bluetooth 5.0 for remote monitoring via PowerProbe Link App
• Display: 2.8-inch TFT color screen with graphical and numerical modes
• Graphical Mode: Displays 20-second voltage and current history as waveforms
• Safety Features: Includes overvoltage (above 30V), overcurrent (above 10A), and temperature protection
• Power Source: Built-in 14.4V, 3000mAh lithium battery
• Charging Interface: USB Type-C, supports PD fast charging
• System Settings: Configurable auto power-off time and current alarm thresholds
• Certifications: FCC, CE, ETL-us, UKCA, EAC
• Interface: Standard OBDII input/output interface
• Durability: Designed for automotive environments.

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Reversible belt hook
• Square friction ring
• Tri-LEDs deliver high definition lighting to increase workspace visibility
• Auto shut-off control applies no more than 34 Nm of torque for hand-tight fastening applications to prevent over tightening
• Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
• 4-Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximise application versatility
• Incredibly compact design for this performance level, with only 124 mm overall length ideal for applications in tight spaces
• The most compact cordless impact wrench in its class, delivering the most access in tight spaces, with performance at 339 Nm of fastening torque

• Program / save profiles for unmatched control
• Configure to any application choosing optimum tool settings for repeatable precision
• Connect via Bluetooth® with the ONE-KEY™ app
• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• ONE-KEY™ app also provides inventory function for total management of your complete tool / equipment fleet
• Save up to 4 custom settings to the tools memory for fast selection on the jobsite
• Complete tool customisation via ONE-KEY™ app to tune the tool to your needs
• Control speed, torque, start - end speeds and LED light
• M18 FIWF12 but with ONE-KEY™ technology
• Select from a range of application profiles or quickly create your own for perfect results on every trigger pull

General Information

Timing Tool Kit - Ford. Timing Tool Kit - Ford

• This kit contains the necessary pins required to lock the camshaft sprocket flywheel and align the crankshaft and fuel pump when checking the valve timing on the following
• For engines built from 2002-2010
• Supplied in a foam tray
• 2.0 litre and 2.4 litre chain driven engines and/or replacing the timing belt on 1.4/1.6 litre engines

• Flexible battery system: works with all MILWAUKEE M12 batteries
• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power run time and durability
• 1/4 Hex chuck for quick and easy bit change
• 4-Mode DRIVE CONTROL allows the user to shift to three different speed and torque settings as well as a self-tapping mode to maximise application versatility
• Tri-LEDs deliver high definition lighting to increase workspace visibility
• Fast driving speed with up to 3,600 rpm and 4,000 ipm
• Outstanding power to size ratio with 170 Nm of torque
• The compact design with a length of only 127 mm is ideal for working in confined spaces

• Compact footprint with low center of gravity and impact resistant reinforced nylon legs to protect against abusive jobsite conditions
• Extendable mast which reaches from 0.91 m to over 1.72 m to light up work spaces
• Low battery indicator - light flashes when battery pack is low
• Head can be rotated 210° vertically and pivoted 270° horizontally to have the best perfect workplace illumination
• Impact resistant adjustable head with highly durable polycarbonate lens to withstand drops up to 3 m
• Protective guard secures the head and lens when the light is collapsed for storage or transport
• 12 high performance LEDs provide 1400 lumens on high light output
• TRUEVIEW™ high definition lighting
• Carry handles on 2 positions for easy one handed transport: weight is evenly balanced when compressed

• The DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEE's POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS electronic intelligence delivering outstanding power, run time and durability
• Premium rubber overmold withstands corrosive materials and provides increased comfort when in use
• Bright LED workspace illumination
• 1/2in. anvil with friction ring for quick and easy socket changes
• Only 71 mm head with anvil profile design allows for more access in tight spaces
• The long body profile allows for more access in hard to reach spaces
• 4-Mode DRIVE CONTROL includes Auto Shut-Off Mode and Bolt Removal Mode which prevents over-tightening and provides more control after bolt breakaway
• Delivers up to 270 Nm fastening torque and 300 Nm nut-busting torque