Tools

• Pin Diameter: 16mm
• Also provides the clearance between head and workbench required when reaming valve guides.
• A pair of support stands which locate into cylinder head via stud holes.

• Range of hose sizes, working lengths and a choice of colour
• Hose recoils to a fraction of it's working length
• 200 m straight ends with spring guard
• Nickel plated 360° swivel fittings
• Polyurethane (PU) material

• Maximum Working Pressure: 200 psi / 14 bar Hose Length: 5 m Hose Inside Diameter: 6.5 mm Hose Outside Diameter: 10 mm Hose Fittings: R 1/4 swivel ends Hose Colour: Blue

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• 180° flex design for improved leverage.
• CR-V material for strength and durability.
• Full chrome polish for corrosion resistance
• Comfort grip handle for less user fatigue.

• Breaker Bar / Socket Carlyle Hand Tools

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 850g

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated
• Sizes: T7H T8H T10H T15H T20H T25H T27H T30H T40H T45H T50H T55H T60H

• Self calibrating
• Auto power off
• Measures tyre tread depth in mm / inch
• Measures pressure in psi / bar / kPa / kgf/cm²

• Tyre Pressure Accuracy: +/- 1.5 % Reading Resolution: 0.1 psi / 0.01 bar / 1 kPa / 0.01 kg/cm² Calibration: 2-100 psi / 0.15-7 bar / 15-700 kPa Tyre Tread Depth Accuracy: +/- 0.2 mm Reading Resolution: 0.01 mm / 0.001 in Calibration: 0-15 mm

• provides better maneuverability, allows users to position the wrench more comfortably and apply torque with greater ease
• Allows for greater access in tight areas
• Helps protect the wrench from rust and corrosion, ensuring longevity
• Clear and easy to read engraving to ensure use of proper size
• Eases transportation and provides storage solution
• 30 and 60 degree head angles
• Polished Chrome Finish
• Double One Size Openings
• Size etched on side
• 10mm to 17mm

• Polished Chrome Finish

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated
• Sizes: T8 T10 T15 T20 T25 T27 T30 T40 T45 T47 T50 T55 T60

• DHA, DHB, DHC, DHD, DHE, DHF, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB, SNJA, SNJB, SNJC, SNJD, STJA, STJB, STJC, STJD, F8JA, F8JB, FUJA, FUJB, ASDA, ASDB, FXDA/C, FXDB/D, FXJA, FXJB, FXJC, RTJA, RTJB, RTJC, RTJD, RTJE, SPJA, SPJC, PSJD, SPJE, UTJA, FXJA, JXJB, FYDA, FYDB, FYDC, FYDD, FYDH, FYJA, FYJB, FYJC, HWDA, HWDB, L1T, L1V, L1W, SHDA, SHDB, SHDC, B4164S3, FYJA, MHA, MHB, EYDB, EYDC, EYDD, EYDE, EYDF, EYDG, EYDI, EYDJ, EYDL, EYPA, EYPC, B4184S11, B4184S8, L8, MZR 1.8(L8), CDBB, CGBA, CGBB, CHBA, CHBB, CSDA, CSDB, Q7DA, QQDA, QQDB, QQDC, CJBA, ALDA, EDBA, EDBB, EDBC, EDBD, EDDB, EDDC, EDDD, EDDF, HMDA, B4204S3, B4204S4, LF, MZR 2.0 (LF), YF, AOBA, AOBC, AODA, AODB, AODE, AOWA, AOWB, CJBA/B, N4JA, N4JB, SYDA, TBBA, TBBB, TBWA, TBWB, L3, GZFA, GZFB, GZFC, SEBA, SEWA, L5
• Equivalent to OE Reference: 21-162B, 21-163, 21-210, 21-259, 303-1054, 303-376/B, 303-507, 303-620, 49 JE01 054, 49 JE01 061, 49 JE02 061, 999-7151, 999-7152, 999-7201
• Ford, Mazda, Volvo
• Ford: B-MAX, C-MAX ('07), Cougar, Fiesta ('03/'08), Fiesta ('13), Fiesta ('96), Fiesta ('02), Focus ('04/'08), Focus ('98), Focus C-MAX, Fusion, Galaxy ('06), Mondeo ('07), Mondeo ('00), Puma, S-MAX, Tourneo Connect ('02), Transit ('06), Transit Connect ('02), Mazda: 2 (DY)(02-07), 3 (BK)(03-09), 3 (BL)(09-14), 5 (CR), 5 (CW), 6 (GG/GY)(02-07), 6 (GH)(07-113), CX-7 (ER)(07-13), MPV (LW)(99-05), MX-5 (NC)(05-15), Tribute (EP)(01-06), Volvo: C30, S40 (03-12), S80 (06-), V50, V70 (07-)

• C4404C Contains the tools required for Setting and Locking the 1.25 - 2.0 Twin Cam 16v. DURATEC Petrol engines (Belt and Chain)

• Socket Size 10 mm,11 mm,12 mm,13 mm,14 mm,15 mm,16 mm,17 mm,18 mm,19 mm,20 mm,21 mm,22 mm,23 mm,24 mm
• Shallow Metric Socket Set
• 6 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• As part of the timing chain replacement/valve timing adjustment, the timing chain must be pre-loaded to a specific torque setting before tightening the Vanos centre bolts. Remove the timing chain tensioner and install C4803 Timing Chain Tensioner Pre-load Tool in its place.
• BMW: 1 Series - E81/E82/E87/E88, 118i, 120i, 128i, 130i, 135i; 3 Series - E46/E90/E91/E92/E93, 316i, 318i, 316Ti, 318Ti, 323i, 325i/xi, 330i/xi, 335i/xi; 5 Series - E60/E61, 523i/Li, 525i/Li/xi, 530i/Li/xi, 535i/xi; 6 Series - E63/E64, 730i/Li; X3- E83, 2.5 & 3.0; X5-E70, 3.0; Z4 - E85/E86, 2.5 & 3.0; Mini: N12 (1.4/1.6), N14 (1.6); Citroen/Peugeot: C4, C4 Picasso, 207, 308, 3008, 5008, RCZ, Partner Teepee - EP3, EP3C, EP6, EP6C, EP6DT, DTS, CDT
• Citroën, Peugeot, BMW, Mini

• As part of the timing chain replacement/valve timing adjustment, the timing chain must be pre-loaded to a specific torque setting before tightening the Vanos centre bolts. Remove the timing chain tensioner and install C4803 Timing Chain Tensioner Pre-load Tool in its place.

General Information

Tensioner Wrench - VAG Tensioner Wrench - VAG.

• Multi purpose tensioner
• Five adjustable positions for use on many Volkswagen Audi Group models
• The tool is designed to offer further access where access is restricted
• 4mm Hex Key required to adjust the positioning
• 18mm pin centres/3mm pins

• Creates a stronger internal thread in soft metals.
• Helps to protect tapped threads against wear and damage.
• Supplied in Storage case.

• Pack of 10PC
• For distribution to bona fide vehicle dealers and repair centres only
• For using with CLWNRMSTR
• Designed for use on McGard locking wheel nuts

• SG2 A18 ER70S-6
• Mild steel welding wire for welding low and medium tensile steels

• High quality hot-forging process provides a performance exceeding ASME standard
• Ultra thick 6 points open end provides durable performance
• High visibility colour filled size mark for easy identification during use
• ASME Compliant
• Premium Chrome Finish
• 15 degree offset dual open end
• Sizes: 9mm x11mm 10mm x12mm 13mm x14mm 15mm x17mm 16mmx 18mm

• ASME Compliant

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated
• Sizes: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm

• Set of 2 spring pressure regulator compressors.
• Perfect for limited space jobs.
• Drop forged Chrome-Vanadium steel.
• Anti rust coating.
• Maximum jaw opening is 370 mm.

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• Knurled teeth on bottom of socket improve grip when handling
• Chrome Vanadium Alloy Steel

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Air flow rate - 12L/min
• Max wattage - 100W
• Max amperage - 8A
• 12V DC power supply - plugs directly into cigarette lighter socket 
• Handy accessory holder - air bed adaptor, ball adaptor and tyre valve adaptor
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Super bright LED night light
• Large precision analogue display (PSI/Bar)
• High speed inflation - 3.5 mins (0-36PSI/175/65/R14)

• Radius corner on working end provides higher torque and better gripping of fastener
• Chamfered drive opening allows a quicker connection between socket and fastener
• Mirror polish chrome-plated finish prevents rust
• S2 Steel Bit provides longer life and performance
• Knurled teeth on bottom of socket improve grip when handling
• Chamfered Drive Opening
• Chrome Vanadium Alloy Steel

• Mirror Polish Chrome-Plated
• Sizes: M4 M5 M6 M8 M10 M12 M14 M16

• Diagnostic tool as it confirms common engine problems like leaking valves or worn piston rings.

• Stainless steel needle and nozzle
• Pressure trigger and air control screw
• Cup Capacity: 600ml
• Air Consumption: 15 CFM
• Air pressure: 3 BAR / 50PSI

• The unique single pawl design prevents the Gear from slipping during high-speed turning.
• The ratchet gear mechanism head is and designed with High-grade Cr-MO material, providing extra strength and durability.
• The tool has a Super Rust-Resistant finishing, proven through a Salt Spray Test that lasted over 72 hours.
• The handle features a unique ergonomic design made of two components for enhanced comfort.
• The 120-Tooth reversible ratcheting mechanism allows for a minimal sweep of 3 degrees, enabling usage in tight spots.
• The Heavy Duty New Index Flex head mechanism offers the option to fix the head or use it in a flexed position.

• Features multiple layers of dielectric substance separating the handle from the tip for the utmost in safety precaution.
• Vapor blasted magnetic tips for maximum convenience.
• Elastic feature prevents the screwdriver blade from breaking when overstressed.
• Precision-formed tip provides an exact fit for small screw applications; great for working on hybrid vehicles.
• Rated to 1,000 Volt AC/DC and meets the IEC 60900 and ASTM F1505 standards. GS and VDE certified.
• Layered Dielectric Substance
• Vapor Blasted Magnetic Tips
• Includes Elastic Feature
• Precision-Formed Tip
• Sizes: PH0 x 60mm PH1 x 79mm PH2 x 100mm PH3 x 152mm Slot 4mm x 100mm 5.5mm x 127mm 6.35mm x 152mm

General Information

Insulated Safety Clamp 1000v

• Weight 52 grams
• Rubber contacts in the jaw protect the insulating shroud
• Jaw opening 45mm
• For use with insulated shrouding to hold the shroud in situ
• Dimensions: Length 140mm